The time is ripe! An innovative contactless method for the timely harvest of soft fruits

Most people are probably familiar with the unpleasant feeling of eating overripe or underripe fruit. Those who work in agriculture are tasked with ensuring a timely harvest so that ripeness is at an optimal point when the fruit is sold, both to minimize the amount of fruit that goes to waste and maximize the quality of the final product. To this end, a number of techniques to assess fruit ripeness have been developed, each with their respective advantages and disadvantages depending on the type of produce.

Although biochemical and optical methods exist, mechanical techniques are the most widely used. They indirectly assess ripeness based on the fruit’s firmness. In turn, firmness is quantified by observing the vibrations that occur on the fruit when mechanical energy is accurately delivered through devices such as hammers, pendulums, or speakers. Unfortunately, these approaches fall short for softer fruits, which are more readily damaged by the contact devices used.

In a recent study published in Foods, a team of scientists from Shibaura Institute of Technology (SIT), Japan, addressed this issue through an innovative method for measuring the firmness of soft fruits using laser-induced plasma (LIP). This work is a sort of follow-up of a previous study in which LIP was used to quantify the firmness of harder fruits.

But what is LIP and how is it used? Plasma is a state of matter similar to the gaseous state but in which most particles have an electric charge. This energetic state can be produced in normal air by focusing a high-intensity laser beam onto a small volume. Because the generated plasma “bubble” is unstable, it immediately expands, sending out shockwaves at ultrasonic speeds. Professor Naoki Hosoya and colleagues at SIT had successfully used LIP shockwaves generated close to the surface of apples to excite a type of vibration called 0S2 mode, colloquially referred to as “football mode vibration” because of how the resulting deformation looks on spherical bodies. They then verified that the frequency of the 0S2 mode vibrations was correlated with the firmness of the fruit.

However, soft fruits do not exhibit 0S2 mode vibrations, so the team had to analyze an alternative type of oscillation: Rayleigh waves. These are waves that occur exclusively on the surface of bodies without penetrating far into the interior. Using Kent mangoes, a setup for generating LIP, and commercially available laser-based vibrometers, the scientists verified that the velocity at which Rayleigh waves propagate is directly related to the firmness of the mangoes. Because the propagation velocity markedly decreases with storage time, it provides a reliable way to indirectly assess ripeness.

The team went further and looked for the best position on the mangoes’ surface to determine the velocity of Rayleigh waves. Mangoes, as well as other soft fruits, have large seeds inside, which can alter the propagation of surface waves in ways that are detrimental to measurements. “The results of our experiments indicate that Rayleigh waves along the ‘equator’ of the mango are better for firmness assessment compared to those along the ‘prime meridian’,” explains Hosoya. The experiments also revealed that cavities within the fruit’s flesh or decay can greatly affect the results of the measurements. Thus, as Hosoya adds, they will keep investigating which is the best area to measure firmness in mangoes using their novel approach.

In short, the team at SIT has engineered an innovative strategy to assess the ripeness of soft fruits from outside. “Our system,” remarks Hosoya, “is suitable for non-contact and non-destructive firmness assessment in mangoes and potentially other soft fruits that do not exhibit the usual 0S2 mode vibrations.” Further refinement of such firmness assessment methods will hopefully make them more reliable and accessible for the agricultural industry. With any luck, their widespread adoption will ensure that fruits reach your plate only when the time is ripe!

Story Source:

Materials provided by Shibaura Institute of Technology. Note: Content may be edited for style and length.

Share Button

Predicting microbial interactions in the human gut

The human gut consists of a complex community of microbes that consume and secrete hundreds of small molecules — a phenomenon called cross-feeding. However, it is challenging to study these processes experimentally. A new study, published in Nature Communications, uses models to predict cross-feeding interactions between microbial species in the gut. Predictions from such computational methods could eventually help doctors get a more complete understanding of gut health.

The microbial community, or microbiome, of the gut is known to influence human health. Previous studies have focused on determining the types of microbes that are present. Unfortunately, this information is not enough to understand the microbiome.

“The gut environment is shaped by small molecules known as metabolites, which are excreted by the microbial community,” said Sergei Maslov (BCXT/CABBI), a professor of bioengineering and Bliss faculty scholar. “Although it is possible to measure these metabolites experimentally, it is cumbersome and expensive.”

The researchers had previously published a study where they used experimental data from other studies to model the fate of metabolites as they pass through the gut microbiome. In the new study, they have used the same model to predict new microbial processes that have not been determined before.

“What we eat passes into our gut, and there is a cascade of microbes which release metabolites,” said Akshit Goyal, a postdoctoral fellow at MIT and a collaborator of the Maslov lab. “Biologists have measured these molecules in human stools, we have shown that you can use computational models to predict the levels of some.”

Measuring every metabolite and trying to understand which microbe might be releasing it can be challenging. “There is a large universe of possible cross-feeding interactions. Using this model, we can aid experiments by predicting which ones are more likely to occur in the gut,” Goyal said.

The model was also supported by genomic annotations, which explain which microbial genes are responsible for processing the metabolites. “We are confident of our modelling predictions because we also checked whether the microbes contain the genes necessary for carrying out the associated reactions. About 65% of our predictions were supported by this information,” said Veronika Dubinkina, a PhD student in bioengineering.

The researchers are now working to improve the model by including more experimental data. “Different people have different strains of gut microbes. Although these different strains have many genes in common, they differ in their capabilities,” Dubinkina said. “We need to collect more data from patients to understand how different microbial communities behave in different hosts.”

“We are also interested in determining how fast the microbes consume and secrete the metabolites,” said Tong Wang, a PhD student in physics. “Currently the model assumes that all the microbes consume metabolites at the same rate. In reality, the rates are different and we need to understand them to capture the metabolite composition in the gut.”

Story Source:

Materials provided by Carl R. Woese Institute for Genomic Biology, University of Illinois at Urbana-Champaign. Original written by Ananya Sen. Note: Content may be edited for style and length.

Share Button

Covid vaccines cut risk of serious illness by 80% in over-80s

The UK will soon be in a “very different world”, government scientists promise after the success of the jabs.

Share Button

Covid: Teachers’ risk ‘similar’ to other under-65s

The study measured infection rates in school staff and pupils in November and December.

Share Button

Covid-19: Critical care beds shortage prompts calls for review

The UK has 7.3 critical care beds per 100,000 people, compared to Germany’s 33.8 and the US’s 34.3.

Share Button

Covid-19: Officials hunt Brazil virus variant case in England

The whereabouts of one infected person is unknown, as they did not give their full contact details.

Share Button

Covid-19: More than 20 million in UK have had first jab

The milestone is a “huge national achievement” and “every jab makes a difference”, Boris Johnson says.

Share Button

Covid-19: Free rapid testing for pupils’ families in England

Pupils’ households and bubbles will be offered tests to take themselves at home twice a week.

Share Button

Imaging space debris in high resolution

Litter is not only a problem on Earth. According to NASA, there are currently millions of pieces of space junk in the range of altitudes from 200 to 2,000 kilometers above the Earth’s surface, which is known as low Earth orbit (LEO). Most of the junk is comprised of objects created by humans, like pieces of old spacecraft or defunct satellites. This space debris can reach speeds of up to 18,000 miles per hour, posing a major danger to the 2,612 satellites that currently operate at LEO. Without effective tools for tracking space debris, parts of LEO may even become too hazardous for satellites.

In a paper publishing today in the SIAM Journal on Imaging Sciences, Matan Leibovich (New York University), George Papanicolaou (Stanford University), and Chrysoula Tsogka (University of California, Merced) introduce a new method for taking high-resolution images of fast-moving and rotating objects in space, such as satellites or debris in LEO. They created an imaging process that first utilizes a novel algorithm to estimate the speed and angle at which an object in space is rotating, then applies those estimates to develop a high-resolution picture of the target.

Leibovich, Papanicolaou, and Tsogka used a theoretical model of a space imaging system to construct and test their imaging process. The model depicts a piece of fast-moving debris as a cluster of very small, highly reflective objects that represent the strongly reflective edges of an item in orbit, such as the solar panels on a satellite. The cluster of reflectors all move together with the same speed and direction and rotate about a common center. In the model, multiple sources of radiation on the Earth’s surface — such as the ground control stations of global navigation satellite systems — emit pulses that are reflected by target pieces of space debris. A distributed set of receivers then detects and records the signals that bounce off the targets.

The model focuses on sources that produce radiation in the X-band, or from frequencies of 8 to 12 gigahertz. “It is well known that resolution can be improved by using higher frequencies, such as the X-band,” Tsogka said. “Higher frequencies, however, also result in distortions to the image due to ambient fluctuations from atmospheric effects.” Signals are distorted by turbulent air as they travel from the target to receivers, which can make the imaging of objects in LEO quite challenging. The first step of the authors’ imaging process was thus to correlate the data taken at different receivers, which can help reduce the effects of these distortions.

The diameter of the area encompassed by the receivers is called the physical aperture of the imaging system — in the model, this is about 200 kilometers. Under normal imaging conditions, the physical aperture’s size determines the resolution of the resulting image; a larger aperture begets a sharper picture. However, the quick movement of the imaging target relative to the receivers can create an inverse synthetic aperture, in which the signals that were detected at multiple receivers as the target moved throughout their field of view are synthesized coherently. This configuration can effectively improve the resolution, as if the imaging system had a wider aperture than the physical one.

Objects in LEO can spin on timescales that range from a full rotation every few seconds to every few hundred seconds, which complicates the imaging process. It is thus important to know — or at least be able to estimate — some details about the rotation before developing the image. The authors therefore needed to estimate the parameters related to the object’s rotation before synthesizing the data from different receivers. Though simply checking all of the possible parameters to see which ones yield the sharpest image is technically feasible, doing so would require a lot of computational power. Instead of employing this brute force approach, the authors developed a new algorithm that can analyze the imaging data to estimate the object’s rotation speed and the direction of its axis.

After accounting for the rotation, the next step in the authors’ imaging process was to analyze the data to develop a picture of the space debris that would hopefully be as accurate and well-resolved as possible. One method that researchers often employ for this type of imaging of fast-moving objects is the single-point migration of cross correlations. Though atmospheric fluctuations do not usually significantly impair this technique, it does not have a very high resolution. A different, commonly-used imaging approach called Kirchhoff migration can achieve a high resolution, as it benefits from the inverse synthetic aperture configuration; however, the trade-off is that it is degraded by atmospheric fluctuations. With the goal of creating an imaging scheme that is not too heavily affected by atmospheric fluctuations but still maintains a high resolution, the authors proposed a third approach: an algorithm whose result they call a rank-1 image. “The introduction of the rank-1 image and its resolution analysis for fast-moving and rotating objects is the most novel part of this study,” Leibovich said.

To compare the performance of the three imaging schemes, the authors gave simulated data of a rotating object in LEO to each one and compared the images that they produced. Excitingly, the rank-1 image was much more accurate and well-resolved than the result of single-point migration. It also had similar qualities to the output of the Kirchhoff migration technique. But this result was not entirely surprising, given the problem’s configuration. “It is important to note that the rank-1 image benefits from the rotation of the object,” Papanicolaou said. Though a rotating object generates more complex data, one can actually incorporate this additional information into the image processing technique to improve its resolution. Rotation at certain angles can also increase the size of the synthetic aperture, which significantly improves the resolution for the Kirchhoff migration and rank-1 images.

Further simulations revealed that the rank-1 image is not easily muddled by errors in the new algorithm for the estimation of rotation parameters. It is also more robust to atmospheric effects than the Kirchhoff migration image. If receivers capture data for a full rotation of the object, the rank-1 image can even achieve optimal imaging resolution. Due to its good performance, this new imaging method could improve the accuracy of imaging LEO satellites and space debris. “Overall, this study shed light on a new method for imaging fast-moving and rotating objects in space,” Tsogka said. “This is of great importance for ensuring the safety of the LEO band, which is the backbone of global remote sensing.”

Share Button

When using pyrite to understand Earth’s ocean and atmosphere: Think local, not global

The ocean floor is vast and varied, making up more than 70% of the Earth’s surface. Scientists have long used information from sediments at the bottom of the ocean — layers of rock and microbial muck — to reconstruct the conditions in oceans of the past.

These reconstructions are important for understanding how and when oxygen became available in Earth’s atmosphere and ultimately increased to the levels that support life as we know it today.

Yet reconstructions that rely on signals from sedimentary rocks but ignore the impact of local sedimentary processes do so at their own peril, according to geoscientists including David Fike in Arts & Sciences at Washington University in St. Louis.

Their new study published Feb. 26 in Science Advances is based on analyses of a mineral called pyrite (FeS2) that is formed in the presence of bacteria. With its chemical-reduced iron (Fe) and sulphur (S), the burial of pyrite in marine sediments is one of the key controls on oxygen levels in Earth’s atmosphere and oceans.

The researchers compared pyrite in sediments collected in a borehole drilled in the shelf just off the eastern coast of New Zealand with sediments drilled from the same ocean basin but hundreds of kilometers out into the Pacific.

“We were able to get a gradient of shallow to deep sediments and compare the differences between those isotopic compositions in pyrite between those sections,” said Fike, professor of Earth and planetary sciences and director of environmental studies at Washington University.

“We demonstrate that, for this one basin in the open ocean, you get very different signals between shallow and deep water, which is prima facie evidence to argue that these signals aren’t the global fingerprint of oxygen in the atmosphere,” said Fike, who also serves as director of Washington University’s International Center for Energy, Environment and Sustainability (InCEES).

Instead of pointing directly to oxygen, the same signals from pyrite could be reinterpreted as they relate to other important factors, Fike said, such as sea level change and plate tectonics.

Fike and first author Virgil Pasquier, a postdoctoral fellow at the Weizmann Institute of Sciences in Israel, first questioned the way that pyrite has been used as a proxy in a study published in PNAS in 2017 using Mediterranean Sea sediments. For his postdoctoral research, Pasquier has been working with professor Itay Halevy at the Weizmann Institute to understand the various controls on the isotopic composition of pyrite. Their results raise concerns about the common use of pyrite sulfur isotopes to reconstruct Earth’s evolving oxidation state.

“Strictly speaking, we are investigating the coupled cycles of carbon, oxygen and sulfur, and the controls on the oxidation state of the atmosphere,” Pasquier said.

“It’s much more sexy for a paper to reconstruct past changes in ocean chemistry than to focus on the burial of rocks or what happened during the burial,” he said. “But I find this part even more interesting. Because most microbial life — especially back when oxygen was initially accumulating in the atmosphere — occurred in sediments. And if our ultimate goal is to understand oxygenation of the oceans, then we have to understand this.”

For this study, the team conducted 185 sulfur isotope analyses of pyrite along the two boreholes. They determined that changes in the signals in pyrite from the nearshore borehole were more controlled by sea level-driven changes in local sedimentation, rather than any other factor.

In contrast, sediments in the deeper borehole were immune to the sea-level changes. Instead, they recorded a signal associated with the long-term reorganization of ocean currents.

“There is a water depth threshold,” said Roger Bryant, a co-author and PhD graduate of Fike’s laboratory at Washington University, now a postdoctoral fellow at the University of Chicago. “Once you go below that water depth, sulfur isotopes apparently are not sensitive to things like climate and environmental conditions in the surface environment.”

Fike added: “The Earth is a complicated place, and we need to remember that when we try to reconstruct how it has changed in the past. There are a number of different processes that impact the kinds of signals that get preserved. As we try to better understand Earth’s long-term evolution, we need to have a more nuanced view about how to extract information from those signals.”

Share Button