Desalination breakthrough could lead to cheaper water filtration

Producing clean water at a lower cost could be on the horizon after researchers from The University of Texas at Austin and Penn State solved a complex problem that has baffled scientists for decades, until now.

Desalination membranes remove salt and other chemicals from water, a process critical to the health of society, cleaning billions of gallons of water for agriculture, energy production and drinking. The idea seems simple — push salty water through and clean water comes out the other side — but it contains complex intricacies that scientists are still trying to understand.

The research team, in partnership with DuPont Water Solutions, solved an important aspect of this mystery, opening the door to reduce costs of clean water production. The researchers determined desalination membranes are inconsistent in density and mass distribution, which can hold back their performance. Uniform density at the nanoscale is the key to increasing how much clean water these membranes can create.

“Reverse osmosis membranes are widely used for cleaning water, but there’s still a lot we don’t know about them,” said Manish Kumar, an associate professor in the Department of Civil, Architectural and Environmental Engineering at UT Austin, who co-led the research. “We couldn’t really say how water moves through them, so all the improvements over the past 40 years have essentially been done in the dark.”

The findings were published today in Science.

The paper documents an increase in efficiency in the membranes tested by 30%-40%, meaning they can clean more water while using significantly less energy. That could lead to increased access to clean water and lower water bills for individual homes and large users alike.

Reverse osmosis membranes work by applying pressure to the salty feed solution on one side. The minerals stay there while the water passes through. Although more efficient than non-membrane desalination processes, it still takes a large amount of energy, the researchers said, and improving the efficiency of the membranes could reduce that burden.

“Fresh water management is becoming a crucial challenge throughout the world,” said Enrique Gomez, a professor of chemical engineering at Penn State who co-led the research. “Shortages, droughts — with increasing severe weather patterns, it is expected this problem will become even more significant. It’s critically important to have clean water availability, especially in low-resource areas.”

The National Science Foundation and DuPont, which makes numerous desalination products, funded the research. The seeds were planted when DuPont researchers found that thicker membranes were actually proving to be more permeable. This came as a surprise because the conventional knowledge was that thickness reduces how much water could flow through the membranes.

The team connected with Dow Water Solutions, which is now a part of DuPont, in 2015 at a “water summit” Kumar organized, and they were eager to solve this mystery. The research team, which also includes researchers from Iowa State University, developed 3D reconstructions of the nanoscale membrane structure using state-of-the-art electron microscopes at the Materials Characterization Lab of Penn State. They modeled the path water takes through these membranes to predict how efficiently water could be cleaned based on structure. Greg Foss of the Texas Advanced Computing Center helped visualize these simulations, and most of the calculations were performed on Stampede2, TACC’s supercomputer.

Story Source:

Materials provided by University of Texas at Austin. Note: Content may be edited for style and length.

Share Button

Stretching diamond for next-generation microelectronics

Diamond is the hardest material in nature. But out of many expectations, it also has great potential as an excellent electronic material. A joint research team led by City University of Hong Kong (CityU) has demonstrated for the first time the large, uniform tensile elastic straining of microfabricated diamond arrays through the nanomechanical approach. Their findings have shown the potential of strained diamonds as prime candidates for advanced functional devices in microelectronics, photonics, and quantum information technologies.

The research was co-led by Dr Lu Yang, Associate Professor in the Department of Mechanical Engineering (MNE) at CityU and researchers from Massachusetts Institute of Technology (MIT) and Harbin Institute of Technology (HIT). Their findings have been recently published in the scientific journal Science, titled “Achieving large uniform tensile elasticity in microfabricated diamond.”

“This is the first time showing the extremely large, uniform elasticity of diamond by tensile experiments. Our findings demonstrate the possibility of developing electronic devices through ‘deep elastic strain engineering’ of microfabricated diamond structures,” said Dr Lu.

Diamond: “Mount Everest” of electronic materials

Well known for its hardness, industrial applications of diamonds are usually cutting, drilling, or grinding. But diamond is also considered as a high-performance electronic and photonic material due to its ultra-high thermal conductivity, exceptional electric charge carrier mobility, high breakdown strength and ultra-wide bandgap. Bandgap is a key property in semi-conductor, and wide bandgap allows operation of high-power or high-frequency devices. “That’s why diamond can be considered as ‘Mount Everest’ of electronic materials, possessing all these excellent properties,” Dr Lu said.

However, the large bandgap and tight crystal structure of diamond make it difficult to “dope,” a common way to modulate the semi-conductors’ electronic properties during production, hence hampering the diamond’s industrial application in electronic and optoelectronic devices. A potential alternative is by “strain engineering,” that is to apply very large lattice strain, to change the electronic band structure and associated functional properties. But it was considered as “impossible” for diamond due to its extremely high hardness.

Then in 2018, Dr Lu and his collaborators discovered that, surprisingly, nanoscale diamond can be elastically bent with unexpected large local strain. This discovery suggests the change of physical properties in diamond through elastic strain engineering can be possible. Based on this, the latest study showed how this phenomenon can be utilized for developing functional diamond devices.

Uniform tensile straining across the sample

The team firstly microfabricated single-crystalline diamond samples from a solid diamond single crystals. The samples were in bridge-like shape — about one micrometre long and 300 nanometres wide, with both ends wider for gripping (See image: Tensile straining of diamond bridges). The diamond bridges were then uniaxially stretched in a well-controlled manner within an electron microscope. Under cycles of continuous and controllable loading-unloading of quantitative tensile tests, the diamond bridges demonstrated a highly uniform, large elastic deformation of about 7.5% strain across the whole gauge section of the specimen, rather than deforming at a localized area in bending. And they recovered their original shape after unloading.

By further optimizing the sample geometry using the American Society for Testing and Materials (ASTM) standard, they achieved a maximum uniform tensile strain of up to 9.7%, which even surpassed the maximum local value in the 2018 study, and was close to the theoretical elastic limit of diamond. More importantly, to demonstrate the strained diamond device concept, the team also realized elastic straining of microfabricated diamond arrays.

Tuning the bandgap by elastic strains

The team then performed density functional theory (DFT) calculations to estimate the impact of elastic straining from 0 to 12% on the diamond’s electronic properties. The simulation results indicated that the bandgap of diamond generally decreased as the tensile strain increased, with the largest bandgap reduction rate down from about 5 eV to 3 eV at around 9% strain along a specific crystalline orientation. The team performed an electron energy-loss spectroscopy analysis on a pre-strained diamond sample and verified this bandgap decreasing trend.

Their calculation results also showed that, interestingly, the bandgap could change from indirect to direct with the tensile strains larger than 9% along another crystalline orientation. Direct bandgap in semi-conductor means an electron can directly emit a photon, allowing many optoelectronic applications with higher efficiency.

These findings are an early step in achieving deep elastic strain engineering of microfabricated diamonds. By nanomechanical approach, the team demonstrated that the diamond’s band structure can be changed, and more importantly, these changes can be continuous and reversible, allowing different applications, from micro/nanoelectromechanical systems (MEMS/NEMS), strain-engineered transistors, to novel optoelectronic and quantum technologies. “I believe a new era for diamond is ahead of us,” said Dr Lu.

The research at CityU was funded by the Hong Kong Research Grants Council and the National Natural Science Foundation of China.

Share Button

Spontaneous robot dances highlight a new kind of order in active matter

Predicting when and how collections of particles, robots, or animals become orderly remains a challenge across science and engineering.

In the 19th century, scientists and engineers developed the discipline of statistical mechanics, which predicts how groups of simple particles transition between order and disorder, as when a collection of randomly colliding atoms freezes to form a uniform crystal lattice.

More challenging to predict are the collective behaviors that can be achieved when the particles become more complicated, such that they can move under their own power. This type of system — observed in bird flocks, bacterial colonies and robot swarms — goes by the name “active matter.”

As reported in the January 1, 2021 issue of the journal Science, a team of physicists and engineers have proposed a new principle by which active matter systems can spontaneously order, without need for higher level instructions or even programmed interaction among the agents. And they have demonstrated this principle in a variety of systems, including groups of periodically shape-changing robots called “smarticles” — smart, active particles.

The theory, developed by Dr. Pavel Chvykov at the Massachusetts Institute of Technology while a student of Prof. Jeremy England, who is now a researcher in the School of Physics at Georgia Institute of Technology, posits that certain types of active matter with sufficiently messy dynamics will spontaneously find what the researchers refer to as “low rattling” states.

“Rattling is when matter takes energy flowing into it and turns it into random motion,” England said. “Rattling can be greater either when the motion is more violent, or more random. Conversely, low rattling is either very slight or highly organized — or both. So, the idea is that if your matter and energy source allow for the possibility of a low rattling state, the system will randomly rearrange until it finds that state and then gets stuck there. If you supply energy through forces with a particular pattern, this means the selected state will discover a way for the matter to move that finely matches that pattern.”

To develop their theory, England and Chvykov took inspiration from a phenomenon — dubbed dubbed — discovered by the Swiss physicist Charles Soret in the late 19th century. In Soret’s experiments, he discovered that subjecting an initially uniform salt solution in a tube to a difference in temperature would spontaneously lead to an increase in salt concentration in the colder region — which corresponds to an increase in order of the solution.

Chvykov and England developed numerous mathematical models to demonstrate the low rattling principle, but it wasn’t until they connected with Daniel Goldman, Dunn Family Professor of Physics at the Georgia Institute of Technology, that they were able to test their predictions.

Said Goldman, “A few years back, I saw England give a seminar and thought that some of our smarticle robots might prove valuable to test this theory.” Working with Chvykov, who visited Goldman’s lab, Ph.D. students William Savoie and Akash Vardhan used three flapping smarticles enclosed in a ring to compare experiments to theory. The students observed that instead of displaying complicated dynamics and exploring the container completely, the robots would spontaneously self-organize into a few dances — for example, one dance consists of three robots slapping each other’s arms in sequence. These dances could persist for hundreds of flaps, but suddenly lose stability and be replaced by a dance of a different pattern.

After first demonstrating that these simple dances were indeed low rattling states, Chvykov worked with engineers at Northwestern University, Prof. Todd Murphey and Ph.D. student Thomas Berrueta, who developed more refined and better controlled smarticles. The improved smarticles allowed the researchers to test the limits of the theory, including how the types and number of dances varied for different arm flapping patterns, as well as how these dances could be controlled. “By controlling sequences of low rattling states, we were able to make the system reach configurations that do useful work,” Berrueta said. The Northwestern University researchers say that these findings may have broad practical implications for microrobotic swarms, active matter, and metamaterials.

As England noted: “For robot swarms, it’s about getting many adaptive and smart group behaviors that you can design to be realized in a single swarm, even though the individual robots are relatively cheap and computationally simple. For living cells and novel materials, it might be about understanding what the ‘swarm’ of atoms or proteins can get you, as far as new material or computational properties.”

Share Button

Multiple mosquito blood meals accelerate malaria transmission

Multiple bouts of blood feeding by mosquitoes shorten the incubation period for malaria parasites and increase malaria transmission potential, according to a study published December 31 in the open-access journal PLOS Pathogens by Lauren Childs of Virginia Tech, Flaminia Catteruccia of the Harvard T.H. Chan School of Public Health, and colleagues. Given that mosquitoes feed on blood multiple times in natural settings, the results suggest that malaria elimination may be substantially more challenging than suggested by previous experiments, which typically involve a single blood meal.

Malaria remains a devastating disease for tropical and subtropical regions, accounting for an estimated 405,000 deaths and 228 million cases in 2018. In natural settings, the female Anopheles gambiae mosquito — the major malaria vector — feeds on blood multiple times in her lifespan. Such complex behavior is regularly overlooked when mosquitoes are experimentally infected with malaria parasites, limiting our ability to accurately describe potential effects on transmission. In the new study, the researchers examine how additional blood feeding affects the development and transmission potential of Plasmodium falciparum malaria parasites in An. gambiae females.

“We wanted to capture the fact that, in endemic regions, malaria-transmitting mosquitoes are feeding on blood roughly every 2-3 days,” says W. Robert Shaw, a lead author of this study. “Our study shows that this natural behavior strongly promotes the transmission potential of malaria parasites, in previously unappreciated ways.”

The results show that an additional blood feed three days after infection with P. falciparum accelerates the growth of the malaria parasite, thereby shortening the incubation period required before transmission to humans can occur. Incorporating these data into a mathematical model across sub-Saharan Africa reveals that malaria transmission potential is likely higher than previously thought, making disease elimination more difficult. In addition, parasite growth is accelerated in genetically modified mosquitoes with reduced reproductive capacity, suggesting that control strategies using this approach, with the aim of suppressing Anopheles populations, may inadvertently favor malaria transmission. The data also suggest that parasites can be transmitted by younger mosquitoes, which are less susceptible to insecticide killing, with negative implications for the success of insecticide-based strategies. Taken together, the results suggest that younger mosquitoes and those with reduced reproductive ability may provide a larger contribution to infection than previously thought.

According to the authors, the findings have important implications for accurately understanding malaria transmission potential and estimating the true impact of current and future mosquito control measures.

Story Source:

Materials provided by PLOS. Note: Content may be edited for style and length.

Share Button

New virtual screening strategy identifies existing drug that inhibits COVID-19 virus

A novel computational drug screening strategy combined with lab experiments suggest that pralatrexate, a chemotherapy medication originally developed to treat lymphoma, could potentially be repurposed to treat Covid-19. Haiping Zhang of the Shenzhen Institutes of Advanced Technology in Shenzhen, China, and colleagues present these findings in the open-access journal PLOS Computational Biology.

With the Covid-19 pandemic causing illness and death worldwide, better treatments are urgently needed. One shortcut could be to repurpose existing drugs that were originally developed to treat other conditions. Computational methods can help identify such drugs by simulating how different drugs would interact with SARS-CoV-2, the virus that causes Covid-19.

To aid virtual screening of existing drugs, Zhang and colleagues combined multiple computational techniques that simulate drug-virus interactions from different, complimentary perspectives. They used this hybrid approach to screen 1,906 existing drugs for their potential ability to inhibit replication of SARS-CoV-2 by targeting a viral protein called RNA-dependent RNA polymerase (RdRP).

The novel screening approach identified four promising drugs, which were then tested against SARS-CoV-2 in lab experiments. Two of the drugs, pralatrexate and azithromycin, successfully inhibited replication of the virus. Further lab experiments showed that pralatrexate more strongly inhibited viral replication than did remdesivir, a drug that is currently used to treat some Covid-19 patients.

These findings suggest that pralatrexate could potentially be repurposed to treat Covid-19. However, this chemotherapy drug can prompt significant side effects and is used for people with terminal lymphoma, so immediate use for Covid-19 patients is not guaranteed. Still, the findings support the use of the new screening strategy to identify drugs that could be repurposed.

“We have demonstrated the value of our novel hybrid approach that combines deep-learning technologies with more traditional simulations of molecular dynamics,” Zhang says. He and his colleagues are now developing additional computational methods for generating novel molecular structures that could be developed into new drugs to treat Covid-19.

Story Source:

Materials provided by PLOS. Note: Content may be edited for style and length.

Share Button

Asian tiger mosquito poses low risk for Zika virus outbreaks

The Asian tiger mosquito does not pose a major risk for Zika virus epidemics, according to a study published December 31 in the open-access journal PLOS Pathogens by Albin Fontaine of the Institut de Recherche Biomédicale des Armées, and colleagues.

Zika virus has triggered large outbreaks in human populations, in some cases causing congenital deformities, fetal loss, or neurological problems in adults. While the yellow fever mosquito Aedes aegypti is considered the primary vector of Zika virus, the Asian tiger mosquito Aedes albopictus has been shown experimentally to transmit the virus and was involved in several transmissions of the virus in France in 2019. Originating from Southeast Asia, Ae. aegypti is an aggressive biter that has invaded the world and is now present on all inhabited continents, including temperate Europe, due to its ability to endure harsh winter conditions. As the second most important vector of human viral pathogens, Ae. albopictus is displacing Ae. aegypti populations due to competitive advantages. But it is not known if Ae. albopictus could trigger large-scale Zika virus epidemics.

To address this question, the researchers exposed Ae. albopictus to Zika virus and assessed infection rates in experiments, modeled the dynamics of Zika virus infection within individual humans, and used epidemiological simulations. The highest risk of transmission occurred during the pre-symptomatic stage of the disease. At this dose, mosquito infection probability was estimated to be 20%, and 21 days were required to reach median systemic infection rates. Despite these unfavorable characteristics for transmission, Ae. albopictus was still able to trigger large outbreaks in a simulated environment in the presence of sufficiently high mosquito densities and biting rates. According to the authors, active surveillance and eradication programs should be implemented in territories occupied by Ae. albopictus to maintain the low risk of Zika virus outbreaks.

The authors conclude, “The complementary combination of dose-dependent experimental infection, modeling of intra-human viremia dynamics, and in silico epidemiological simulations confirms the low epidemic potential of Aedes albopictus for Zika virus.”

Story Source:

Materials provided by PLOS. Note: Content may be edited for style and length.

Share Button

Allergists offer reassurance regarding potential allergic reactions to COVID-19 vaccines

Reports of possible allergic reactions to the COVID-19 vaccines produced by Pfizer-BioNTech and Moderna, both recently approved for emergency use by the U.S. Food and Drug Administration (FDA), have raised public concern. A team of experts led by allergists at Massachusetts General Hospital (MGH) has now examined all relevant information to offer reassurance that the vaccines can be administered safely even to people with food or medication allergies. The group’s review is published in the Journal of Allergy and Clinical Immunology: In Practice.

In response to accounts of potential allergic reactions in some people following COVID-19 vaccination in the United Kingdom, that country’s medical regulatory agency advised that individuals with a history of anaphylaxis to a medicine or food should avoid COVID-19 vaccination. After closer review of the data related to allergic reactions, however, the FDA recommended that the vaccines be withheld only from individuals with a history of severe allergic reactions to any component of the COVID-19 vaccine, and the Centers for Disease Control and Prevention advised that all patients be observed for 15 minutes post-vaccination by staff who can identify and manage such reactions. The U.S. agencies do not recommend that people with food or medication allergies avoid vaccination.

To provide insights from allergists’ perspectives, Aleena Banerji, MD, clinical director of the Allergy and Clinical Immunology Unit at MGH and associate professor at Harvard Medical School, and her colleagues have summarized what’s currently known about allergic reactions to vaccines like those developed against COVID-19, and they have proposed detailed advice so that individuals with different allergy histories can safely receive their first COVID-19 vaccine. They also outline steps on safely receiving the second dose in individuals who develop a reaction to their first dose of COVID-19 vaccine.

“As allergists, we want to encourage vaccination by reassuring the public that both FDA-approved COVID-19 vaccines are safe. Our guidelines are built upon the recommendations of U.S. regulatory agencies and provide clear steps to the medical community on how to safely administer both doses of the vaccine in individuals with allergic histories,” says Banerji.

The experts note that allergic reactions to vaccines are rare, with a rate of about 1.3 per 1 million people. They also determined that the Pfizer-BioNTech and Moderna COVID-19 vaccine allergic reactions will have a similarly low rate of occurrence. They stress that vaccine clinics will be monitoring all patients for 15 to 30 minutes and can manage any allergic reactions that occur. Banerji and her co-authors recommend that individuals with a history of anaphylaxis to an injectable drug or vaccine containing polyethylene glycol or polysorbate speak with their allergists before being vaccinated. They stress that patients with severe allergies to foods, oral drugs, latex, or venom can safely receive the COVID-19 vaccines.

Co-senior authors of the review are MGH’s Kimberly G. Blumenthal, MD, MSc, and Brigham and Women’s Elizabeth Phillips, MD. Other co-authors include MGH’s Paige G. Wickner, MD, Rebecca Saff, MD, PhD, Lacey B. Robinson, MD, MPH, Aidan A. Long, MD, Anna R. Wolfson, MD, and David A. Khan, MD; Cosby A. Stone Jr., MD, MPH, of Vanderbilt University Medical Center; and Paul Williams, MD, of the University of Washington School of Medicine.

Story Source:

Materials provided by Massachusetts General Hospital. Note: Content may be edited for style and length.

Share Button

Covid: Doctors call for rapid rollout of vaccines

But there are fears bottlenecks in the system may hamper how fast NHS can deliver vaccines.

Share Button

Social media safety messages: Pictures should match the words

When using social media to nudge people toward safe and healthy behaviors, it’s critical to make sure the words match the pictures, according to a new study.

After looking at social media posts, parents of young children were better able to recall safety messages such as how to put a baby safely to sleep when the images in the posts aligned with the messages in the text, the researchers found.

The study appears in the Journal of Health Communication.

“Many times, scientists and safety experts aren’t involved in decisions about social media for health agencies and other organizations, and we end up seeing images that have nothing to do with the safety message or, worse, images that contradict the guidance,” said lead author Liz Klein, an associate professor of public health at The Ohio State University.

Take the safe sleep example, for instance. The researchers found posts that advocated a bumper-free crib for baby but used an image of an infant in a crib with bumpers. They saw posts about preventing head injury with bike helmets illustrated by pictures of kids without bike helmets.

“In this study, we were trying to understand how much those mismatches matter — do people understand the message even if the picture isn’t right? Does the picture really matter?” Klein said.

Their answers came from research using eye-tracking technology to gauge the attention young parents paid to various posts, and subsequent tests to see what they recalled about the safety messages.

When the 150 parents in the study were shown a trio of posts with matched imagery and text and three other posts with mismatched visual and written messages, they spent far longer on the matched posts — 5.3 seconds, compared to the 3.3 seconds their eyes lingered on the mismatched posts.

Further, the matched messages appeared to make a difference in understanding and recall of safety messages. After accounting for differences in health literacy and social media use among participants, the researchers found that each second of viewing time on matched posts was associated with a 2.8% increase in a safety knowledge score.

“With nearly 70% of adults reporting use of social media, and many parents using social media and other internet sources to keep current on injury prevention strategies, social media is a great opportunity to broadcast safety and injury prevention messages,” said study co-author Lara McKenzie, a principal investigator in the Center for Injury Research and Policy at Nationwide Children’s Hospital in Columbus.

“As more health organizations and public health agencies use social media to share health information with the public, the findings of our study underscore the need to ensure that the imagery and text in social media posts are aligned.”

Klein said she understands that those managing social media accounts may be drawn to images that are the most attention-grabbing. But when it comes to health and safety, this study suggests that making sure the image and the text are sending the same message is more important.

“If you want people to put their medicine up and out of reach of children, kids to wear their bike helmets or new parents to remember that babies should always go to sleep on their backs, alone and in a crib — that’s where matching matters. Maybe save the eye-grabbing stuff and the humorous posts for different purposes.”

Klein said the findings in this study likely extend beyond child safety messaging to any number of health and safety campaigns, but that there’s more work to be done to understand how best to harness the power of social media for different types of public health communication.

“We need to pay more attention to how we communicate with the people we’re trying to influence with health and safety guidance. All of us can do a better job of thinking about how we use our social media accounts to contribute to better public health,” she said.

Story Source:

Materials provided by Ohio State University. Original written by Misti Crane. Note: Content may be edited for style and length.

Share Button

Covid rule-breakers ‘have blood on their hands’

An intensive care doctor tells BBC Radio 5 Live the rise in cases is down to people not social distancing.

Share Button