Mouse-controlled mouse helps researchers understand intentional control

We know that the brain can direct thoughts, but how this is achieved is difficult to determine. Researchers at the Sainsbury Wellcome Centre have devised a brain machine interface (BMI) that allows mice to learn to guide a cursor using only their brain activity. By monitoring this mouse-controlled mouse moving to a target location to receive a reward, the researchers were able to study how the brain represents intentional control.

The study, published today in Neuron, sheds light on how the brain represents causally-controlled objects. The researchers found that when mice were controlling the cursor, brain activity in the higher visual cortex was goal-directed and contained information about the animal’s intention. This research could one day help to improve BMI design.

“Brain machine interfaces are devices that allow a person or animal to control a computer with their mind. In humans, that could be controlling a robotic arm to pick up a cup of water, or moving a cursor on a computer to type a message using the mind. In animals, we are using these devices as models for understanding how to make BMIs better,” said the paper’s first author, Dr Kelly Clancy, who completed the study at the Sainsbury Wellcome Centre, University College London, following previous work at Biozentrum, University of Basel.

“Right now, BMIs tend to be difficult for humans to use and it takes a long time to learn how to control a robotic arm for example. Once we understand the neural circuits supporting how intentional control is learned, which this work is starting to elucidate, we will hopefully be able to make it easier for people to use BMIs,” said co-author of the paper, Professor Tom Mrsic-Flogel, Director of the Sainsbury Wellcome Centre, University College London.

Traditionally it has been difficult to study how causally-controlled objects are represented in the brain. Imagine trying to determine how the brain represents a cursor it is controlling versus a cursor it is passively watching. There are motor signals in the first case but not in the second, so it is difficult to compare the two. With BMIs, the subject doesn’t physically move, so a cleaner comparison can be made.

In this study, the researchers used a technique called widefield brain imaging, which allowed them to look at the whole dorsal surface of the cortex while the animal was using the BMI. This technique enabled an unbiased screen of the cortex to locate the areas that were involved in learning to intentionally control the cursor.

Visual cortical areas in mice were found to be involved during the task. These areas included the parietal cortex, an area of the brain implicated in intention in humans.

“Researchers have been studying the parietal cortex in humans for a long time. However, we weren’t necessarily expecting this area to pop out in our unbiased screen of the mouse brain. There seems to be something special about parietal cortex as it sits between sensory and motor areas in the brain and may act as a way station between them,” added Dr Kelly Clancy.

By delving deeper into how this way station works, the researchers hope to understand more about how control is exerted by the brain. In this study, mice learned to map their brain activity to sensory feedback. This is analogous to how we learn to interact with the world — for example, we adjust how we use a computer mouse depending on its gain setting. Our brains build representations of how objects typically behave, and execute actions accordingly. By understanding more about how such rules are generated and updated in the brain, the researchers hope to be able to improve BMIs.

Story Source:

Materials provided by Sainsbury Wellcome Centre. Note: Content may be edited for style and length.

Share Button

Covid: New variant found ‘due to hard work of UK scientists’

Similar new variants of the coronavirus may be circulating undetected around the world, scientists say.

Share Button

Covid jab ‘very likely’ to protect against new variant

If it doesn’t, the boss of BioNTech says its vaccine could be refined very quickly.

Share Button

Overcoming Digital FOMO

One reason people succumb to digital clutter like clogged inboxes and excessive browser tabs is that they’re being too clingy with digital content.

There’s an overwhelm of digital content, and you may feel the need to capture and save lots of it, hopefully to be digested later.

Having an intelligent capture system can help, but it’s also wise to reduce the flow if you’re frequently overflowing your inboxes with new ideas.

Here are some tips to help you overcome digital clinginess.

  • Test being 100% caffeine-free for at least a month. Regular caffeine consumption can make it harder to prioritize by making trivial items seem more important than they are. Caffeine is also addictive, and any addiction tends to encourage other addictive patterns, thereby weakening your self-discipline.
  • Use the OHIO rule: Only handle it once. Make each decision about what to do with digital content as soon as it comes up.
  • Make no your default. Each piece of digital content is an invitation that must be justified. Unless you can say “hell yes” to it, let it go and close it.
  • Favor immersive learning instead of chaotic learning. If a topic really interests you, do a focused deep dive into it. Read several books. Seek and out read worthwhile articles. Take a course. Then let it go completely when you feel you’ve digested enough info to satisfy you for now. When you realize that there’s something meaningful and new to explore in that same field, plan another focused deep dive. Consume content from a full glass, not a sippy cup.
  • Ignore suggestions except when you’re actively asking for them. What would you read next if you had no “to read” list? Could you invite suggestions, pick and buy several new books, and then read them till done? When you have your stack, you can ignore all other suggestions till you actually need more.
  • Consider a now or never framing when faced with a quick suggestion. Handle it now, or let it go forever. If you decline it once and it’s important enough, it will be raised again.
  • Don’t look. You can use social media without ever looking at other people’s feeds. Just interact in your own space regarding the ideas you share. Don’t subject yourself to a flurry of random ideas from other people that will clutter your mind multiple times per day.
  • Look at your goals and projects more than at other people’s input and suggestions. If your goals aren’t as interesting, set more interesting goals. If you keep turning your attention away from your goals, your goals are probably too boring.
  • Ask anti-FOMO questions. You may have a tendency to over-focus on questions like “What if I need this?” when considering whether to keep something. Develop a counter-voice that pushes back with objections like “Could this be clutter?” and “What difference will this make to my life 10 years from now?” and “Shouldn’t I be working on my goals instead?”
  • Limit subscriptions. Set a limit for how many email lists you can subscribe to, like a max of five. When you add one, drop an old one. Follow no more than 10 YouTube channels. For each subscription, ask how it’s helping you achieve your goals.
  • Practice digital minimalism. Delete apps you don’t love. Clear your desktop of clutter. Reduce your bookmarks by 80%. Remove distracting visual reminders that your brain must constantly process. If it’s on the screen in front of you, some part of your brain is processing it.
  • Delete accumulated digital clutter. Would you feel lighter if you deleted your least relevant terabyte of saved data? Of all the data you’ve piled up, what will you actually need to keep during the next decade or two of your life? Is any of that anchoring you to the past? Would you discover some extra freedom by letting much of it go? If you only kept 50 gigs, what would you keep?

Be careful with digital FOMO because this mindset can really clutter up your life if you don’t stay on top of it. When you notice that some part of your digital life is becoming bloated and unwieldy, reset your approach. Demolish the bloat and restore a sense of ease and lightness.

Share Button

Coronavirus: Impact of new variant on children investigated

Experts urgently assess whether the mutation of coronavirus spreads more easily among the young.

Share Button

Biotech cotton key to eliminating devastating pest from US and Mexico

For much of the past century, the invasive pink bollworm wreaked havoc in the southwestern United States and northern Mexico — inflicting tens of millions of dollars in damage annually to cotton on both sides of the border.

A multifaceted strategy combining genetically engineered cotton with classical pest control tactics eradicated the pink bollworm from cotton-producing areas of the continental U.S. and Mexico, according to a new study to be published in Proceedings of the National Academy of Sciences.

“Although pink bollworm remains a daunting pest in over 100 countries, our strategic coalition rid the U.S. and Mexico of this invasive insect,” said lead study author Bruce Tabashnik, a Regents Professor in the University of Arizona Department of Entomology.

“By analyzing computer simulations and 21 years of field data from Arizona, we discovered that genetically engineered cotton and the release of billions of sterile pink bollworm moths acted synergistically to suppress this pest,” said Jeffrey Fabrick, a co-author of the study and a research entomologist with the U.S. Department of Agriculture’s Agricultural Research Service.

According to the study, the eradication program saved U.S. cotton growers $192 million from 2014 to 2019. It also helped to reduce insecticides sprayed against all cotton pests by 82%, preventing the application of over a million pounds of insecticides per year in Arizona.

A Long Road to Suppression

Native to Australasia — a region that comprises Australia, New Zealand and some neighboring islands — the pink bollworm is one of the world’s most invasive insects. After female moths lay their eggs on cotton plants, the caterpillars hatch, bore into cotton bolls and devour the seeds within. Their feasting disrupts production of cotton lint.

This voracious pest was first detected in the U.S. in 1917. Using field data from 1969, the new study estimates that over 200 billion pink bollworm caterpillars infested cotton fields in Arizona that year. In 1990, the pest cost Arizona cotton growers $32 million in damages, despite $16 million invested in insecticides to control it.

The tide began to turn in 1996, with the introduction of cotton genetically engineered to produce proteins from the bacterium Bacillus thuringiensis. The proteins in Bt cotton kill pink bollworm and other caterpillar pests but are harmless to people and most beneficial insects.

Although Bt cotton kills essentially 100% of susceptible pink bollworm caterpillars, the pest rapidly evolved resistance to Bt proteins in laboratory experiments at the University of Arizona and in Bt cotton fields in India.

To delay pest resistance, UArizona scientists worked with farmers to develop and implement a strategy of planting non-Bt cotton refuges to allow survival of susceptible insects. Tabashnik’s team also determined the mutations that cause resistance in the lab and used DNA screening to monitor for those adaptations in the field.

Within 10 years, the use of Bt cotton reduced pink bollworm populations by 90%. For the first time since the pest’s arrival, eradication seemed within grasp.

‘Everything but the Kitchen Sink’

“In contrast with the rapid evolution of pest resistance to genetically engineered crops elsewhere, Bt cotton was suppressing this pest in Arizona for 10 years,” Tabashnik explained. “We said, ‘Let’s take this a step further. Let’s throw everything but the kitchen sink at it and get rid of it. If not forever, for as long as we can sustain it.'”

In a concerted, binational effort, University of Arizona Cooperative Extension and research scientists joined forces with cotton growers, the biotech industry and government partners to devise the first program of its kind to eradicate the invasive pest.

In addition to traditional pest control tactics, such as plowing cotton fields after harvest to reduce the pest’s overwintering survival, a novel strategy largely replacing refuges of non-Bt cotton with mass releases of sterile pink bollworm moths was initiated in Arizona in 2006.

The sterile moths were released from airplanes by the billions to overwhelm field populations of the pest. In concert, the U.S. Environmental Protection Agency waived the requirement for planting refuges, allowing farmers in Arizona to plant up to 100% Bt cotton.

To test the success of this multipronged attack, scientists with the University of Arizona College of Agriculture and Life Sciences conducted computer simulations and analyzed field data collected in Arizona from 1998 to 2018. Their results show neither of the two tactics would have worked alone.

“In this era plagued by invasive organisms, as well as doubts about the power of science and controversy about genetic engineering, the study exemplifies the tremendous benefits of collaboration and synergy between biotechnology and classical tactics,” Tabashnik said. “We hope the concepts illustrated here will inspire integrated approaches to combat other invasive life forms.”

Share Button

Light signal emitted during photosynthesis used to quickly screen crops

An international effort called Realizing Increased Photosynthetic Efficiency (RIPE) aims to transform crops’ ability to turn sunlight and carbon dioxide into higher yields. To achieve this, scientists are analyzing thousands of plants to find out what tweaks to the plant’s structure or its cellular machinery could increase production. University of Illinois researchers have revealed a new approach to estimate the photosynthetic capacity of crops to pinpoint these top-performing traits and speed up the screening process, according to a new study in the Journal of Experimental Botany.

“Photosynthesis is the entry point for carbon dioxide to become all the things that allow plants to grow, but measuring canopy photosynthesis is really difficult,” said Carl Bernacchi, a Research Plant Physiologist for the U.S. Department of Agriculture, Agricultural Research Service, who is based at Illinois’ Carl R. Woese Institute for Genomic Biology. “Most methods are time-consuming and only measure a single leaf when it’s the function of all leaves on all plants that really matters in agriculture.”

Bernacchi’s team uses two spectral instruments simultaneously — a hyperspectral camera for scanning crops and a spectrometer used to record very detailed information about sunlight — to quickly measure a signal called Solar Induced Fluorescence (SIF) that is emitted by plants when they become ‘energy-excited’ during photosynthesis.

With this SIF signal, the team gains critical insights about photosynthesis that could ultimately lead to improving crop yields.

They discovered that a key part of the SIF signal better correlates with photosynthetic capacity. This ‘SIF yield’ accounts for only a fraction of the energy emitted as SIF by plants to the energy captured by plants in total, but it carries important information.

“With this insight, we can use a couple of instruments in a synergistic way to make more accurate estimates, and we can make these tools and pipelines more accessible to people who are interested in advancing the translation of photosynthesis,” said Peng Fu, a postdoctoral researcher who led this work at Illinois.

In this study, they picked out specific bands of light that are known to be linked to SIF (and are already well understood physiologically) to better understand what hyperspectral data is actually needed to make these estimates.

In the past, they relied on expensive hyperspectral cameras that captured thousands of bands of light. “However, this study suggests that much cheaper cameras could be used instead now that we know what bands of light are needed,” said Matthew Siebers, a postdoctoral researcher at Illinois.

These tools could speed up progress by orders of magnitude, said Katherine Meacham-Hensold, also a postdoctoral researcher at Illinois. “This technology is game-changing for researchers who are refining photosynthesis as a means to help realize the yields that we will need to feed humanity this century.”

Realizing Increased Photosynthetic Efficiency (RIPE) is an international research project that is improving photosynthesis to equip farmers worldwide with higher-yielding crops to ensure everyone has enough food to lead a healthy and productive life. RIPE is supported by the Bill & Melinda Gates Foundation, the U.S. Foundation for Food and Agriculture Research, and the U.K. Foreign, Commonwealth & Development Office, who are committed to ensuring Global Access and making the project’s technologies available to the farmers who need them the most.

Share Button

Covid-19: More than 40 countries ban UK arrivals

Spain and India are among the nations to suspend flights amid concern over spread of new variant.

Share Button

Covid-19: Visitors from tier 4 and Wales ‘must self-isolate’

Areas of England outside the South East say the new variant of Covid-19 is likely to be circulating.

Share Button

When light and atoms share a common vibe

An especially counter-intuitive feature of quantum mechanics is that a single event can exist in a state of superposition — happening both here and there, or both today and tomorrow.

Such superpositions are hard to create, as they are destroyed if any kind of information about the place and time of the event leaks into the surrounding — and even if nobody actually records this information. But when superpositions do occur, they lead to observations that are very different from that of classical physics, questioning down to our very understanding of space and time.

Scientists from EPFL, MIT, and CEA Saclay, publishing in Science Advances, demonstrate a state of vibration that exists simultaneously at two different times, and evidence this quantum superposition by measuring the strongest class of quantum correlations between light beams that interact with the vibration.

The researchers used a very short laser-pulse to trigger a specific pattern of vibration inside a diamond crystal. Each pair of neighboring atoms oscillated like two masses linked by a spring, and this oscillation was synchronous across the entire illuminated region. To conserve energy during this process, a light of a new color is emitted, shifted toward the red of the spectrum.

This classical picture, however, is inconsistent with the experiments. Instead, both light and vibration should be described as particles, or quanta: light energy is quantized into discrete photons while vibrational energy is quantized into discrete phonons (named after the ancient Greek “photo = light” and “phono = sound”).

The process described above should therefore be seen as the fission of an incoming photon from the laser into a pair of photon and phonon — akin to nuclear fission of an atom into two smaller pieces.

But it is not the only shortcoming of classical physics. In quantum mechanics, particles can exist in a superposition state, like the famous Schrödinger cat being alive and dead at the same time.

Even more counterintuitive: two particles can become entangled, losing their individuality. The only information that can be collected about them concerns their common correlations. Because both particles are described by a common state (the wavefunction), these correlations are stronger than what is possible in classical physics. It can be demonstrated by performing appropriate measurements on the two particles. If the results violate a classical limit, one can be sure they were entangled.

In the new study, EPFL researchers managed to entangle the photon and the phonon (i.e., light and vibration) produced in the fission of an incoming laser photon inside the crystal. To do so, the scientists designed an experiment in which the photon-phonon pair could be created at two different instants. Classically, it would result in a situation where the pair is created at time t1 with 50% probability, or at a later time t2 with 50% probability.

But here comes the “trick” played by the researchers to generate an entangled state. By a precise arrangement of the experiment, they ensured that not even the faintest trace of the light-vibration pair creation time (t1 vs. t2) was left in the universe. In other words, they erased information about t1 and t2. Quantum mechanics then predicts that the phonon-photon pair becomes entangled, and exists in a superposition of time t1 and t2. This prediction was beautifully confirmed by the measurements, which yielded results incompatible with the classical probabilistic theory.

By showing entanglement between light and vibration in a crystal that one could hold in their finger during the experiment, the new study creates a bridge between our daily experience and the fascinating realm of quantum mechanics.

“Quantum technologies are heralded as the next technological revolution in computing, communication, sensing, says Christophe Galland, head of the Laboratory for Quantum and Nano-Optics at EPFL and one of the study’s main authors. “They are currently being developed by top universities and large companies worldwide, but the challenge is daunting. Such technologies rely on very fragile quantum effects surviving only at extremely cold temperatures or under high vacuum. Our study demonstrates that even a common material at ambient conditions can sustain the delicate quantum properties required for quantum technologies. There is a price to pay, though: the quantum correlations sustained by atomic vibrations in the crystal are lost after only 4 picoseconds — i.e., 0.000000000004 of a second! This short time scale is, however, also an opportunity for developing ultrafast quantum technologies. But much research lies ahead to transform our experiment into a useful device — a job for future quantum engineers.”

Story Source:

Materials provided by Ecole Polytechnique Fédérale de Lausanne. Original written by Christophe Galland, Nik Papageorgiou. Note: Content may be edited for style and length.

Share Button