Saturn’s moon Titan has insulating methane-rich crust up to six miles thick

Saturn’s largest moon Titan is the only place other than Earth known to have an atmosphere and liquids in the form of rivers, lakes and seas on its surface. Because of its extremely cold temperature, the liquids on Titan are made of hydrocarbons like methane and ethane, and the surface is made of solid water ice. A new study, led by planetary scientists at the University of Hawai’i at Manoa, revealed that methane gas may also be trapped within the ice, forming a distinct crust up to six miles thick, which warms the underlying ice shell and may also explain Titan’s methane-rich atmosphere.

The research team, led by research associate Lauren Schurmeier, that also includes Gwendolyn Brouwer, doctoral candidate, and Sarah Fagents, associate director and researcher, in the Hawai’i Institute of Geophysics and Planetology (HIGP) in the UH Manoa School of Ocean and Earth Science and Technology (SOEST), observed in NASA data that Titan’s impact craters are hundreds of meters shallower than expected and only 90 craters have been identified on this moon.

“This was very surprising because, based on other moons, we expect to see many more impact craters on the surface and craters that are much deeper than what we observe on Titan,” said Schurmeier. “We realized something unique to Titan must be making them become shallower and disappear relatively quickly.”

To investigate what might be beneath this mystery, the researchers tested in a computer model how the topography of Titan might relax or rebound after an impact if the ice shell was covered with a layer of insulating methane clathrate ice, a kind of solid water ice with methane gas trapped within the crystal structure. Since the initial shape of Titan’s craters is unknown, the researchers modeled and compared two plausible initial depths, based on fresh-looking craters of similar size on a similar-size icy moon, Ganymede.

“Using this modeling approach, we were able to constrain the methane clathrate crust thickness to five to ten kilometers [about three to six miles] because simulations using that thickness produced crater depths that best matched the observed craters,” said Schurmeier. “The methane clathrate crust warms Titan’s interior and causes surprisingly rapid topographic relaxation, which results in crater shallowing at a rate that is close to that of fast-moving warm glaciers on Earth.”

Methane-rich atmosphere

Estimating the thickness of the methane ice shell is important because it may explain the origin of Titan’s methane-rich atmosphere and helps researchers understand Titan’s carbon cycle, liquid methane-based “hydrological cycle,” and changing climate.

“Titan is a natural laboratory to study how the greenhouse gas methane warms and cycles through the atmosphere,” said Schurmeier. “Earth’s methane clathrate hydrates, found in the permafrost of Siberia and below the arctic seafloor, are currently destabilizing and releasing methane. So, lessons from Titan can provide important insights into processes happening on Earth.”

Structure of Titan

The topography seen on Titan makes sense in light of these new findings. And constraining the thickness of the methane clathrate ice crust indicates that Titan’s interior is likely warm — not cold, rigid, and inactive as previously thought.

“Methane clathrate is stronger and more insulating than regular water ice,” said Schurmeier. “A clathrate crust insulates Titan’s interior, makes the water ice shell very warm and ductile, and implies that Titan’s ice shell is or was slowly convecting.”

“If life exists in Titan’s ocean under the thick ice shell, any signs of life (biomarkers) would need to be transported up Titan’s ice shell to where we could more easily access or view them with future missions,” Schurmeier added. “This is more likely to occur if Titan’s ice shell is warm and convecting.”

With the NASA Dragonfly mission to Titan scheduled to launch in July 2028 and arrive in 2034, researchers will have an opportunity to make up-close observations of this moon and further investigate the icy surface, including a crater named Selk.

Share Button

Developing new high-performance and recyclable materials

Professor Chiyoung Park of the Department of Energy Science and Engineering at DGIST (President Kunwoo Lee) has developed a groundbreaking new material poised to advance high-sensitivity recyclable sensor technology. Working in collaboration with Professor U-hyeok Choi of Inha University (President Cho Myeongwoo), Park’s team created a recyclable high-sensitivity sensor based on the dynamic polymer network. This next-generation material is garnering attention for its ability to combine environmental sustainability with high performance.

Existing high-sensitivity sensors have been limited by performance degradation due to fatigue and repeated use. However, the dynamic polymer network developed by the research team maintains excellent sensitivity and durability by using vinylogous urethane bonding. This bonding structure self-heals in response to external stimuli such as temperature, light, and pressure, preventing performance degradation even after repeated use.

The dynamic polymer network is also sensitive to various mechanical movements, heat, and light, and sensors based on the network excel at detecting human body movements. Researchers have demonstrated that the sensors can accurately detect finger bends, changes in facial expressions, and even swallowing movements in the throat. One of the biggest strengths of the technology is that it can maintain the same sensitivity after recycling without any degradation.

Addressing the growing issue of e-waste, the team designed the technology to combine recyclability with high performance. They believe the dynamic polymer network’s versatility supports repeated use and recycling, potentially leading to significant reductions in e-waste. Their work promises to have far-reaching implications not only in sensor technology but also in next-generation electronics, wearable devices, and medical equipment. The team continues to work on commercializing the technology for widespread industrial applications.

“Our material offers excellent processability and can be recycled mechanically or chemically,” said DGIST Professor Chiyoung Park. “The polymer network undergoes a simple recycling process, which we expect will extend the lifespan of electronic devices and wearable sensors, significantly reducing electronic waste.”

The research received support from the Industrial Technology Alchemist Project, funded by the Ministry of Trade, Industry and Energy, and the Basic Research Center Project of the Ministry of Science and ICT. The findings (first author: Gyeonghyeon Choi, integrated MS/PhD student) were published in the Chemical Engineering Journal.

Share Button

Ultra-sensitive electronic skin modeled after the human brain

Based on joint research with Professor Jaehyuk Lim at the Department of Mechanical Engineering, Jeonbuk National University, Professor Youngu Lee at the Department of Energy Science and Engineering, the Daegu Gyeongbuk Institute of Science & Technology (DGIST; President Kunwoo Lee), has successfully developed an ultra-sensitive pressure sensor for electronic skin modeled after the nervous system in the human brain. This technology is applicable to future devices, including AI-based digital healthcare devices, and is expected to be utilized across various fields, such as transparent displays and wearable devices, due to its transparency and physical flexibility.

Pressure sensors are devices that detect a slight change or force and convert it into signals. They are used in smartphones and healthcare devices to detect touch, heart rate, and muscle movements. Similar to the human skin, the pressure sensor−based electronic skin detects slight pressure, so it is used across many different applications, including wearable devices, medical monitoring devices, and sensory systems for robots. To employ electronic skin for more practical purposes, it is indispensable to go beyond simply detecting pressure and achieve greater sensitivity, transparency, and flexibility. In this context, many studies are being conducted to improve performance.

The research team led by Professor Lee developed a pressure sensor that emulates the way the human brain transmits signals. The brain transmits signals in a complex and quick way as neurons and glial cells work together. Professor Lee’s team created a network of nanoparticles modeled after this structure and designed a pressure sensor sensitive to slight pressure.

The pressure sensor developed in this study is not only highly sensitive but also highly transparent and flexible. It can detect slight changes, such as in the heart rate and finger movements, as well as the pressure of water droplets. Furthermore, it works stably even after 10,000 repeated uses, and its performance does not decline even in hot or humid environments.

Professor Lee at the Department of Energy Science and Engineering, DGIST, said, “Based on this study, we successfully developed a tactile sensor applicable to the next-generation electronic skin with transparency and flexibility. Hopefully, research on the basic mechanism of how the sensor works will continue, leading to the development of artificial tactile sensors that simulate the human skin and the technological development of transparent displays for commercialization.”

This study was conducted jointly by Jiwoo Koo, a PhD program student at the Department of Materials Science and Engineering, Seoul National University; Dr. Jongyoon Kim at the Department of Energy Science and Engineering, DGIST; Dr. Myungseok Ko, Jeonbuk National University; Professor Youngu Lee, DGIST; and Professor Jaehyuk Lim, Jeonbuk National University. In addition, the study was funded by the National Research Foundation of Korea’s Mid-Career Research Project and the Sustainable Solar Energy Use Engineering Research Center Project, and its results were published in the October 2024 issue of the Chemical Engineering Journal, an international journal in the field of chemical engineering.

Share Button

‘A brain tumour the size of a tennis ball came out my eyebrow’

Patient Doreen Adams of Aberdeen says she is grateful for the benefits of the new brain surgery.

Share Button

Millions in the U.S. may rely on groundwater contaminated with PFAS for drinking water supplies

Approximately 71 to 95 million people in the Lower 48 states — more than 20% of the country’s population — may rely on groundwater that contains detectable concentrations of per- and polyfluoroalkyl substances, also known as PFAS, for their drinking water supplies. These findings are according to a U.S Geological Survey study published Oct. 24.

The predictive model results can help members of the public, water suppliers and regulators understand the potential for PFAS contamination, guide future studies and inform strategic planning for water resources.

USGS scientists are the first to report national estimates of PFAS occurrence in untreated groundwater that supplies water to public and private wells. This research also provides the first estimate of the number of people across the country who are potentially affected by PFAS-contaminated groundwater.

Along with a scientific report, the USGS published an interactive, online map so users can see probability estimates of PFAS occurrence. Note that predictive results are intended to be evaluated at state, regional and national scales rather than at individual household levels. Probability estimates are for the presence of PFAS in groundwater and do not account for any subsequent actions taken by states, municipalities or individuals to treat drinking water. The model does not include estimates of PFAS concentrations; testing is the only way to confirm the presence of contaminants.

Exposure to certain PFAS may lead to adverse health risks in people, according to the U.S. Environmental Protection Agency. PFAS are a group of synthetic chemicals used in a wide variety of common applications, from the linings of fast-food boxes and non-stick cookware to fire-fighting foams and other purposes. PFAS are commonly called “forever chemicals” because many of them do not easily break down and can build up over time, making them a concern for drinking water quality.

“This study’s findings indicate widespread PFAS contamination in groundwater that is used for public and private drinking water supplies in the U.S.,” said Andrea Tokranov, USGS research hydrologist and lead author of this study. “This new predictive model can help prioritize areas for future sampling to help ensure people aren’t unknowingly drinking contaminated water. This is especially important for private well users, who may not have information on water quality in their region and may not have the same access to testing and treatment that public water suppliers do.”

The EPA has established legally enforceable levels, called maximum contaminant levels, for six types of PFAS in drinking water. The EPA regulates public water supplies, and some states have additional regulations for drinking water. Some homes use private water supplies, where residents are responsible for the maintenance, testing and treatment of their drinking water. Those interested in treatment processes and testing options can read EPA’s guidance or contact their state officials or water supplier.

The states with the largest populations relying on public water supplies with potentially contaminated groundwater sources are Florida and California. Regarding private wells, Michigan, Florida, North Carolina, Pennsylvania, New York and Ohio have the largest populations relying on potentially contaminated groundwater.

The study also presents data according to population percentage. In Massachusetts, for example, the source water for 86 to 98% of people who rely on groundwater from public water supplies could be contaminated with PFAS. In Connecticut, the source water for 67 to 87% of the people who rely on groundwater from private wells could be affected. Details by state can be seen in the report’s tables S6 through S8.

“To derive these estimates, the team analyzed 1,238 groundwater samples collected by USGS scientists and determined how factors such as urban development and well depth can impact PFAS occurrence,” continued Tokranov. “With that information, a detailed machine learning model was developed and used to identify which geographic areas have a higher likelihood for contamination. That information was combined with existing USGS research on the number of people in a given area who rely on groundwater for drinking water to establish population estimates.”

Scientists present separate estimates for public and private wells because they typically receive water from different groundwater depths. Public wells using groundwater as the primary water source are usually deeper than private wells.

There are more than 12,000 types of PFAS, not all of which can be detected with current tests; the USGS study tested for the presence of 24 common types. The USGS estimates consider the presence of at least one of those 24 types of PFAS. The most frequently detected compounds were perfluorobutane sulfonate known as PFBS, perfluorooctane sulfonate known as PFOS and perfluorooctanoate known as PFOA.

This research provides a broad outlook for the Lower 48 states and presents state-level estimates. Scientists did not look in detail at specific cities or provide estimates for the types of PFAS present or PFAS concentrations.

Share Button

Human actions likely cause insect color change

New Zealand’s native stoneflies have changed colour in response to human-driven environmental changes, new research shows.

Just published in the journal Science, the University of Otago study provides arguably the world’s most clear-cut case of animal evolution in response to change made by humans.

Co-author Professor Jon Waters, of the Department of Zoology, says the stonefly has become a different colour due to recent deforestation.

“In natural forested regions, a native species has evolved ‘warning’ colours that mimic those of a poisonous forest species, to trick predators into thinking they are poisonous too.

“But the removal of forests since humans arrived has removed the poisonous species. As a result, in deforested regions the mimicking species has abandoned this strategy — as there is nothing to mimic — instead evolving into a different colour.”

Scientists have long wondered whether humans are causing evolutionary changes in natural populations.

The most well-known example of evolution caused by humans was the peppered moth population in the United Kingdom, which changed colour in response to industrial pollution in the 1800s.

But Professor Waters says even that case has been considered controversial.

This new study shows how humans have changed the way native species interact.

Co-author Dr Graham McCulloch says humans have disrupted ecological interactions between species that evolved over millions of years, but some of our native species are resilient enough to overcome this.

“This study is important because it shows that, at least for some of our native species, there is the possibility of adapting to the environmental changes caused by humans, even when the change is rapid,” Dr McCulloch says.

“It also shows that independent populations have undergone similar changes in response to deforestation — there have been similar shifts independently in different parts of the species’ range — showing that evolution can be a predictable process.”

Share Button

GPs advise not to ignore scabies symptoms

The itchy rash spreads via physical contact and is highly infectious, the Royal College of GP says.

Share Button

Nigerians are experiencing neuro-long COVID, research finds

For the first time, scientists have found individuals in Nigeria are experiencing neurological manifestations of long COVID — called neuro-long COVID — such as brain fog, mild cognitive impairment, fatigue, sleep problems, headache, sensations of pins and needles, and muscle pain.

The study was a collaboration between scientists at Northwestern Medicine and a Nigerian team of scientists from the University of Lagos and Lagos University Teaching Hospital (LUTH) in Lagos, Nigeria. Of the 2,319 participants, 106 (4.6%) had long COVID with neurologic symptoms, and some were still experiencing symptoms up to two years after their initial episode of COVID-19. Researchers also found patients who were hospitalized for COVID-19 pneumonia reported a higher frequency of long COVID symptoms than those who were not hospitalized and had mild initial COVID-19 (11.5% vs 3.9%, respectively).

The findings were published today, October 24, in the Journal of NeuroVirology.

The findings highlight the need for improved screening, diagnosis and treatment of neuro-long COVID in Nigeria.

“Based on this data, there is hopefully going to be some intervention to alleviate their suffering,” said Dr. Igor Koralnik, chief of neuro-infectious disease and global neurology at Northwestern University Feinberg School of Medicine. “We’ve determined that even in a resource-limited setting where people have many other problems to worry about, we can still perform these studies, find those patients, and diagnose them.”

Scientists from the Nigerian team include neurologist Dr. Njideka U. Okubadejo and infectious disease physician Dr. Iorhen E. Akase, both of the University of Lagos and LUTH.

Koralnik and his team launched the Northwestern Medicine Neuro-COVID-19 Clinic in May 2020 and were soon evaluating a large number of patients who were exhibiting post-COVID neurologic symptoms. They then began researching the disease. In Nigeria, the opposite has happened. People in Nigeria are not aware that long COVID is a disease for which symptomatic treatments are available, and there was a scarcity of post-COVID clinics even during the height of the pandemic.

“This is why we have to start by doing the research to demonstrate the need for diagnosis and clinical care of these patients and advocate for specialized outpatient clinics,” Koralnik said. “If you don’t know that something exists, you can’t treat it.”

Breakdown of neurologic symptoms

The predominant neurologic symptoms among study participants at any time during the disease course included:

  • Difficulty remembering/brain fog (59.4%)
  • Fatigue (55.7%)
  • Sleep problems (32%)
  • Headache (31%)
  • Paresthesia, or numbness and pins and needles (11.3%)
  • Myalgia, or muscle pain (9.4%).

Of the 66 participants with neuro-long COVID who underwent an in-person neurological evaluation and cognitive screening, 16.9% completed the Montreal Cognitive Assessment, a widely used screening assessment for detecting cognitive impairment, and had results consistent with mild cognitive impairment.

Next steps

In a future study, the scientists plan to treat brain fog and cognitive dysfunction in neuro-long COVID patients in Nigeria by applying the same techniques he and his team are currently using in Chicago, Koralnik said.

COVID-19 continues to occur despite vaccination and boosters, and according to an ongoing household pulse study carried out by the National Center for Health Statistics, approximately 14 million adults in the U.S. are currently experiencing long COVID. Long COVID principally affects adults in their prime, affecting their quality of life and ability to work, contributing to profound public health and socio-economic impacts.

Millenia Jimenez who works in the Koralnik laboratory at Northwestern is a co-author on the study.

Share Button

Disposable vapes to be banned from June

Ministers say the Tobacco and Vapes Bill is intended to prevent environmental damage and protect children’s health.

Share Button

Lucy Letby loses bid to appeal against conviction

The former nurse’s bid to challenge her conviction for the attempted murder of a baby is dismissed.

Share Button