Coronavirus test website reopens for bookings after ‘significant demand’

Millions of key workers and their households can apply for a test to see if they have coronavirus.

Share Button

Climate change may push some species to higher elevations — and out of harm’s way

A new WCS-led study reveals that mountain-dwelling species fleeing warming temperatures by retreating to higher elevations may find refuge from reduced human pressure.

A new study published in Nature Communications by scientists at WCS, the University of California, Berkeley, and the United States Forest Service shows that nearly 60 percent of all mountainous area is under intense human pressure. Most of the pressure is at low elevations and mountain bases, which tend to be easier places for people to live, grow food, and build roads. The scientists then used climate models to make predictions about how species would move under climate change. Based on their predictions, they found that species tend to move to higher elevations, and that these higher elevations tend to have more intact land for species because there is less human pressure.

Without factoring in human pressure, the authors warn that conservation actions may be misguided. Factoring in human pressure reveals the true ‘shape’ of a mountain for species that are restricted to intact landscapes, which are often the species of greatest conservation concern. Here, the ‘true shape’ refers to how much land area is potentially available as habitat for a species as it moves up in elevation, not simply how much total land area is available. The true shape can reveal where species will tend to lose versus gain intact land area as they shift under climate change: the elevations where species are expected to lose area represent the priority zones for conservation.

Mountains are home to over 85 percent of the world’s amphibians, birds, and mammals, making them global conservation priorities. But mountain-dwelling species are at risk from human activities, such as agriculture, livestock grazing, and development that reduce their habitat, and climate change that threatens to push species upslope as they struggle to find tolerable temperatures.

“Species are adapted to certain temperature conditions. As temperatures warm in mountains, scientists have documented species moving to higher elevations to maintain the same temperatures,” said Paul Elsen, a WCS Climate Adaptation Scientist and lead author of the study. “This was always seen as a problem, because species would have less land area and less habitat to occupy at high elevations. But what we found is that as species move upslope, they tend to move away from areas that are already under intense human pressure and into areas with reduced human pressure. As a result, they can occupy more intact land area, even if the total amount of land area declines.”

The authors combined several global databases to make their assessments: high-resolution digital elevation models gave a picture about how much surface area is available at different elevations. The Human Footprint Index provided information on pressure from human activities. Global climate models projected how temperatures are likely to change by the late 21st century.

The authors then used computer simulations to place hundreds of thousands of hypothetical ‘species’ across all mountain ranges at different elevations and then predicted how they would shift their ranges based on climate projections. For each simulation, they compared the amount of area the species had to begin with to the amount they would have after the range shift under climate change.

Said Elsen: “We were surprised to find that many species had more intact land area available after the range shift compared to when they started.”

The results suggest that many species in mountain ranges may have more intact land area available in the future if they track warming temperatures to higher slopes, though there were exceptions.

“Our results offer a glimmer of hope for montane species under climate change,” Elsen said. “Montane species are still facing tremendous human pressure, especially at low elevations, but we have the opportunity now to protect intact habitats at higher elevations to give these species the best possible chance going forward.”

Story Source:

Materials provided by Wildlife Conservation Society. Note: Content may be edited for style and length.

Share Button

Traffic officer protein governs speed of sugar/fat conversion pathway

Scientists in Texas and Pennsylvania have identified a protein sensor that restricts how much sugar and fat our cells convert into energy during periods of starvation. It is possible, the scientists say, that the sensor could be fine-tuned to prompt more sugar and fat conversion in people with metabolic conditions such as diabetes, obesity and cardiovascular disease who need help trimming down and living a healthier lifestyle.

The study was published April 21 in the journal Science Signaling.

Senior author Madesh Muniswamy, Ph.D., from the Long School of Medicine at The University of Texas Health Science Center at San Antonio, is an expert in the function and properties of mitochondria. These are the cell structures that convert sugar and fat into chemical energy called ATP.

“We want to offer, in the future, a solution to the metabolic crisis faced by millions of people across the world,” Dr. Muniswamy said. “Millions of people consume too much food, while millions of others are in poverty and subsist on too little food. We are studying what happens at the molecular level in both situations with a goal of developing a drug to intervene.”

Speed of conversion

Our bodies continuously move things from cell to cell with what are sort of like roadways and cars. The vehicle required for fat and sugar conversion is called the mitochondrial calcium uniporter, or MCU. Like traffic moving people to destinations, the speed at which the MCU moves the energy is essential. If it is too slow, conditions such as obesity appear. If it is too fast, malnourishment results.

Driving a regulated speed limit at all times is desirable for proper health, Dr. Muniswamy said.

Keeper of the road

In the Science Signaling article, Dr. Muniswamy and colleagues describe another key component that, like a traffic police officer, regulates this roadway activity.

“We identified a mitochondrial protein called MICU1 that functions as a gatekeeper of this roadway,” Dr. Muniswamy said.

When nutrient levels are low, MICU1 clamps down on the channel activity to prevent excess energy transaction. “When you’re starving, you want to live longer, you don’t want to burn all the sugar and the fat you have, so MICU1 slows down the activity,” Dr. Muniswamy said.

The opposite is also true — if the roadway traffic is driving too slowly, MICU1 can rev it up.

Relieve conditions

“In the future, we might design a new drug to control this pathway to basically alleviate many cardiovascular- and metabolic syndrome-related diseases,” Dr. Muniswamy said. “That’s our plan.

“When you speed up the channel, all the sugar and fat will be burned, and you slim down,” he added.

Acknowledgments

The research involves multiple faculty and staff of the Department of Medicine and the Center for Renal Precision Medicine, both within the Long School of Medicine at UT Health San Antonio. Collaborators are from the Lewis Katz School of Medicine at Temple University, the Penn State University College of Medicine and Cedars-Sinai Medical Center in Los Angeles.

Coauthors in the Long School of Medicine are W. Brian Reeves, M.D.; Kumar Sharma, M.D.; Luke Norton, Ph.D.; Subramanya Srikantan, Ph.D.; Madesh Muniswamy, Ph.D.; Cassidy C. Daw; Travis R. Madaris; Karthik Ramachandran, Ph.D.; Benjamin T. Enslow; Cherubina S. Rubannelsonkumar; Soumya Maity, Ph.D.; Pragya SinghMalla; and Christopher E. Shannon, Ph.D. Dr. Muniswamy is the corresponding author. Coauthor from the School of Dentistry at UT Health San Antonio is Brij B. Singh, Ph.D.

Funding is from the National Institutes of Health and U.S. Department of Defense.

Share Button

Two steps closer to flexible, powerful, fast bioelectronic devices

Dion Khodagholy, assistant professor of electrical engineering, is focused on developing bioelectronic devices that are not only fast, sensitive, biocompatible, soft, and flexible, but also have long-term stability in physiological environments such as the human body. Such devices would greatly improve human health, from monitoring in-home wellness to diagnosing and treating neuropsychiatric diseases, including epilepsy and Parkinson’s disease. The design of current devices has been severely constrained by the rigid, non-biocompatible electronic components needed for safe and effective use, and solving this challenge would open the door to a broad range of exciting new therapies.

In collaboration with Jennifer N. Gelinas, Department of Neurology, and the Institute for Genomic Medicine at Columbia University Iriving Medical Center, Khodagholy has recently published two papers, the first in Nature Materials (March 16) on ion-driven soft and organic transistors that he and Gelinas have designed to record individual neurons and perform real-time computation that could facilitate diagnosis and monitoring of neurological disease.

The second paper, published today in Science Advances, demonstrates a soft, biocompatible smart composite — an organic mixed-conducting particulate material (MCP) — that enables the creation of complex electronic components which traditionally require several layers and materials. It also enables easy and effective electronic bonding between soft materials, biological tissue, and rigid electronics. Because it is fully biocompatible and has controllable electronic properties, MCP can non-invasively record muscle action potentials from the surface of arm and, in collaboration with Sameer Sheth and Ashwin Viswanathan at Baylor College of Medicine’s department of neurosurgery, large-scale brain activity during neurosurgical procedures to implant deep brain stimulation electrodes.

“Instead of having large implants encapsulated in thick metal boxes to protect the body and electronics from each other, such as those used in pacemakers, and cochlear and brain implants, we could do so much more if our devices were smaller, flexible, and inherently compatible with our body environment,” says Khodagholy, who directs the Translational NeuroElectronics Lab at Columbia Engineering. “Over the past several years, my group has been working to use unique properties of materials to develop novel electronic devices that allow efficient interaction with biological substrates — specifically neural networks and the brain.”

Conventional transistors are made out of silicon, so they cannot function in the presence of ions and water, and in fact break down because of ion diffusion into the device. Therefore, the devices need to be fully encapsulated in the body, usually in metal or plastic. Moreover, although they work well with electrons, they are not very effective at interacting with ionic signals, which is how the body’s cells communicate. As a result, these properties restrict the abiotic/biotic coupling to capacitive interactions only on the surface of material, resulting in lower performance. Organic materials have been used to overcome these limitations as they are inherently flexible, but the electrical performance of these devices was not sufficient to perform real-time brain signal recording and processing.

Khodagholy’s team took advantage of both the electronic and the ionic conduction of organic materials to create ion driven transistors they call e-IGTs, or enhancement-mode, internal ion-gated organic electrochemical transistors, that have embedded mobile ions inside their channels. Because the ions do not need to travel long distances to participate in the channel switching process, they can be switched on and off quickly and efficiently. The transient responses depend on electron hole rather than ion mobility, and combine with high transconductance to result in a gain-bandwidth that is several orders of magnitude above that of other ion-based transistors.

The researchers used their e-IGTs to acquire a wide range of electrophysiological signals, such as in vivo recording of neural action impulses, and to create soft, biocompatible, long-term implantable neural processing units for the real-time detection of epileptic discharges.

“We’re excited about these findings,” says Gelinas. “We’ve shown that E-IGTs offer a safe, reliable, and high-performance building block for chronically implanted bioelectronics, and I am optimistic that these devices will enable us to safely expand how we use bioelectronic devices to address neurologic disease.”

Another major advance is demonstrated by the researchers in their Science Advances paper: enabling bioelectronic devices, specifically those implanted in the body for diagnostics or therapy, to interface effectively and safely with human tissue, while also making them capable of performing complex processing. Inspired by electrically active cells, similar to those in the brain that communicate with electrical pulses, the team created a single material capable of performing multiple, non-linear, dynamic electronic functions just by varying the size and density of its composite mixed-conducting particles.

“This innovation opens the door to a fundamentally different approach to electronic device design, mimicking biological networks and creating multifunctional circuits from purely biodegradable and biocompatible components,” says Khodagholy.

The researchers design and created mixed conducting particulate (MCP)-based high performance anisotropic films, independently addressable transistors, resistors, and diodes that are pattern-free, scalable, and biocompatible. These devices carried out a variety of functions, including recording neurophysiologic activity from individual neurons, performing circuit operations, and bonding high-resolution soft and rigid electronics.

“MCP substantially reduces the footprint of neural interface devices, permitting recording of high-quality neurophysiological data even when the amount of tissue exposed is very small, and thus decreases the risk of surgical complications,” says Gelinas. “And because MCP is composed of only biocompatible and commercially available materials, it will be much easier to translate into biomedical devices and medicine.”

Both the E-IGTs and MCP hold great promise as critical components of bioelectronics, from wearable miniaturized sensors to responsive neurostimulators. The E-IGTs can be manufactured in large quantities and are accessible to a broad range of fabrication processes. Similarly, MCP components are inexpensive and easily accessible to materils scientist and engineers. In combination, they form the foundation for fully implantable biocompatible devices that can be harnessed both to benefit health and to treat disease.

Khodagholy and Gelinas are now working on translating these components into functional long-term implantable devices that can record and modulate brain activity to help patients with neurological diseases such as epilepsy.

“Our ultimate goal is to create accessible bioelectronic devices that can improve peoples’ quality of life,” says Khodagholy, “and with these new materials and components, it feels like we have stepped closer to that.”

Share Button

Catalyst opens door to more efficient, environmentally friendly ethylene production

A research team led by North Carolina State University has engineered a new catalyst that can more efficiently convert ethane into ethylene, which is used in a variety of manufacturing processes. The discovery could be used in a conversion process to drastically reduce ethylene production costs and cut related carbon dioxide emissions by up to 87%.

“Our lab previously proposed a technique for converting ethane into ethylene, and this new redox catalyst makes that technique more energy efficient and less expensive while reducing greenhouse gas emissions,” says Yunfei Gao, a postdoctoral scholar at NC State and lead author of a paper on the work. “Ethylene is an important feedstock for the plastics industry, among other uses, so this work could have a significant economic and environmental impact.”

“Ethane is a byproduct of shale gas production, and the improved efficiency of our new catalyst makes it feasible for energy extraction operations in remote locations to make better use of that ethane,” says Fanxing Li, corresponding author of the paper and an associate professor and University Faculty Scholar in NC State’s Department of Chemical Engineering.

“It is estimated that more than 200 million barrels of ethane are rejected each year in the lower 48 states due to the difficulty of transporting it from remote locations,” Li says. “With our catalyst and conversion technique, we think it would be cost effective to convert that ethane into ethylene. The ethylene could then be converted into liquid fuel, which is much easier to transport.

“The problem with current conversion techniques is that you can’t scale them down to a size that makes sense for remote energy extraction sites — but our system would work well in those locations.”

The new redox catalyst is a molten carbonate promoted mixed metal oxide, and the conversion process takes place at between 650 and 700 degrees Celsius with integrated ethane conversion and air separation. Current conversion techniques require temperatures higher than 800 degrees C.

“We estimate that the new redox catalyst and technique cut energy requirements by 60-87%,” Li says.

“Our technique would require an initial investment in the installation of new, modular chemical reactors, but the jump in efficiency and ability to convert stranded ethane would be significant,” Li says.

Story Source:

Materials provided by North Carolina State University. Note: Content may be edited for style and length.

Share Button

Fault roughness and magnitude of earthquakes

A new study led by McGill University has found that tectonic plates beneath the Earth’s surface can show varying degrees of roughness and could help explain why certain earthquakes are stronger than others.

Earthquakes happen when the rocks beneath the Earth’s surface break along geological fault lines and slide past each other. The properties of these faults — such as the roughness of their surface — can have an influence on the size of seismic events, however their study has been challenging because they are buried deep beneath the Earth’s surface.

In order to have a better understanding of the characteristics of these faults, researchers from McGill University, the University of California Santa Cruz and Ruhr University Bochum in Germany used high-resolution seismic reflection data to map and measure the roughness of 350 km2 of a plate boundary fault located off the Pacific coast of Costa Rica.

“We already knew that the roughness of a fault was an important factor, but we did not know how rough faults in the subsurface truly are, nor how variable the roughness is for a single fault,” says James Kirkpatrick, a professor in McGill’s Department of Earth and Planetary Sciences.

Rougher surfaces of faults may explain earthquake magnitude

In a recently published study in Nature Geoscience, Kirkpatrick and his colleagues were able to show that some parts of the studied fault have a rougher surface than others.

Historically, the earthquakes that have occurred in this part of the world have been moderately large (M7) and Kirkpatrick, who is also the study’s first author, believes the rough patches they found might be the reason why.

“These rough patches are stronger and more resistant to earthquake slip,” he says. “The historical record of earthquakes is relatively short, so we can’t say with certainty that larger ones have not occurred. Future seismic events in the area, which will be recorded with modern equipment, should help us determine if they show the same limited magnitude.”

Kirkpatrick and his colleagues also hope to apply their methods to other subduction zones where similar geophysical data is available to start to evaluate whether their conclusions are generally applicable.

“This connection between the fault roughness and earthquake magnitude might one day help us understand the size and style of earthquakes most likely to occur a given fault.”

Story Source:

Materials provided by McGill University. Note: Content may be edited for style and length.

Share Button

Dramatic loss of food plants for insects

Plummeting insect numbers are becoming a concern. Academic discourse focused on three main causes: the destruction of habitats, pesticides in agriculture and the decline of food plants for insects. A team of researchers from the Universities of Bonn and Zurich and the Swiss Federal Institute for Forest, Snow and Landscape Research WSL have now demonstrated for the first time that the diversity of food plants for insects in the canton of Zurich has dramatically decreased over the past 100 years or so. This means that bees, flies and butterflies are increasingly deprived of their food base. The study, which is representative for all of Central Europe, has now been published in the journal “Ecological Applications.”

“Over the past 100 years, there has been a general decline in food plants for all kinds of insects in the canton of Zurich,” says Dr. Stefan Abrahamczyk from the Nees Institute for Biodiversity of Plants at the University of Bonn. The homogenization of the originally diverse landscape has resulted in the disappearance of many habitats, especially the wetlands, which have shrunk by around 90 percent. Human settlements have spread more and more at the expense of cultivated land, and the general intensification of pasture and arable farming has led to a widespread depletion of meadows and arable habitats. The researchers compared the abundance of food plants of different insect groups, based on current mapping for the years 2012 to 2017, with data-based estimates from the years 1900 to 1930 in the canton of Zurich (Switzerland).

The food plants of specialized groups of flower visitors are particularly affected by the decline. For instance, the Greater Knapweed (Centaurea scabiosa) is pollinated by bumblebees, bees and butterflies, as their tongues are long enough to reach the nectar. The decline is particularly dramatic for plant species that can only be pollinated by a single group of insects. In the case of Aconite (Aconitum napellus), for example, this can only be done by bumblebees because the plant’s toxin evidently does not affect them.

Overall, all plant communities have become much more monotonous, with just a few dominant common species. “It’s hard for us to imagine what vegetation looked like 100 years ago,” says Dr. Michael Kessler from the Department of Systematic and Evolutionary Botany at the University of Zurich. “But our data show that about half of all species have experienced significant decline in their abundance, while only ten percent of the species have increased.”

250 volunteers helped with mapping

Residents with appropriate botanical knowledge helped with the current survey. They mapped the entire canton of Zurich by plotting an area of one square kilometer each at intervals of three kilometers. The focus here was on the different types of vegetation and the abundance of different plants. “Without the assistance of more than 250 volunteers, who not only mapped the current flora but also processed the historical collections, a project of this scope would not have been feasible,” says Dr. Thomas Wohlgemuth of the Swiss Federal Institute for Forest, Snow and Landscape Research WSL, who initiated the mapping project ten years ago with the Zurich Botanical Society.

The most important source on the earlier flora in the canton of Zurich was the unpublished manuscript of Eugen Baumann, a collection of about 1200 handwritten pages. It contains precise and detailed information on the abundance and distribution of plant species before 1930. Dr. Abrahamczyk researched which of the listed species belong to those flowering plants that are visited by insects in search of pollen and nectar. The “customers” include bees, bumblebees, wasps, butterflies, hoverflies, flies and beetles.

Results are largely transferable to Central Europe

Dr. Abrahamczyk has been working on pollination biology for about ten years. He wrote his doctoral thesis at the University of Zurich, then conducted research at the LMU Munich and joined the Nees Institute of the University of Bonn in 2014. When, in late 2018, his former doctoral supervisor, Dr. Michael Kessler, suggested that the recently completed mapping of the canton’s flora be combined with pollinator data, Dr. Abrahamczyk was immediately enthusiastic — also because this subject is highly topical. “The laborious literature search and analysis then took some time, and now the study could finally be published,” says the scientist from the University of Bonn. “The results are transferable to the whole of Central Europe with minor regional restrictions.”

Story Source:

Materials provided by University of Bonn. Note: Content may be edited for style and length.

Share Button

Water may look like a simple liquid; however, it is anything but simple to analyze

An international team of scientists lead by Professor Martina Havenith from Ruhr-Universität Bochum (RUB) has been able to shed new light on the properties of water at the molecular level. In particular, they were able to describe accurately the interactions between three water molecules, which contribute significantly to the energy landscape of water. The research could pave the way to better understand and predict water behaviour at different conditions, even under extreme ones. The results have been published online in the journal Angewandte Chemie on 19 April 2020.

Interactions via vibrations

Despite water is at first glance looking like a simple liquid it has many unusual properties, one of them being that it is less dense when it is frozen than when it is liquid. In the simplest way liquids are described by the interaction of their direct partners, which are mostly sufficient for a good description, but not in the case of water: The interactions in water dimers account for 75 per cent of the energy that keeps water together. Martina Havenith, head of the Bochum-based Chair of Physical Chemistry II and spokesperson for the Ruhr Explores Solvation (Resolv) Cluster of Excellence, and her colleagues from Emory University in Atlanta, US, recently published an accurate description of the interactions related to the water dimer. In order to get access to the cooperative interactions, which make up 25 per cent of the total water interaction, the water trimer had to be investigated.

Now, the team lead by Martina Havenith in collaboration with colleagues from Emory University and of the University of Mississipi, US, has been able to describe for the first time in an accurate way the interaction energy among three water molecules. They tested modern theoretical descriptions against the result of the spectroscopic fingerprint of these intermolecular interactions.

Obstacles for experimental research

Since more than 40 years, scientists have developed computational models and simulations to describe the energies involved in the water trimer. Experiments have been less successful, despite some pioneer insights in gas phase studies, and they rely on spectroscopy. The technique works by irradiating a water sample with radiation and recording how much light has been absorbed. The obtained pattern is related to the different type of excitations of intermolecular motions involving more than one water molecules. Unfortunately, to obtain these spectroscopic fingerprints for water dimers and trimers, one needs to irradiate in the terahertz frequency region. And laser sources that provide high-power have been lacking for that frequency region.

This technical gap has been filled only recently. In the current publication, the RUB scientists used the free electron lasers at Radboud University in Nijmegen in The Netherlands, which allows for high powers in the terahertz frequency region. The laser was applied through tiny droplets of superfluid helium, which is cooled down at extremely low temperatures, at minus 272,75 degrees Celsius. These droplets can collect water molecules one by one, allowing to isolate small aggregates of dimers and trimers. In this way the scientists were able to irradiate exactly the molecules they wanted to and to acquire the first comprehensive spectrum of the water trimer in the terahertz frequency region.

The experimental observations of the intermolecular vibrations were compared to and interpreted using high level quantum calculations. In this way the scientists could analyse the spectrum and assign up to six different intermolecular vibrations.

Story Source:

Materials provided by Ruhr-University Bochum. Note: Content may be edited for style and length.

Share Button

Palaeontologists reveal ‘the most dangerous place in the history of planet Earth’

100 million years ago, ferocious predators, including flying reptiles and crocodile-like hunters, made the Sahara the most dangerous place on Earth.

This is according to an international team of scientists, who have published the biggest review in almost 100 years of fossil vertebrates from an area of Cretaceous rock formations in south-eastern Morocco, known as the Kem Kem Group.

The review, published in the journal ZooKeys, “provides a window into Africa’s Age of Dinosaurs” according to lead author Dr Nizar Ibrahim, an Assistant Professor of Biology at the University of Detroit Mercy and Visiting Researcher from the University of Portsmouth.

About 100 million years ago, the area was home to a vast river system, filled with many different species of aquatic and terrestrial animals. Fossils from the Kem Kem Group include three of the largest predatory dinosaurs ever known, including the sabre-toothed Carcharodontosaurus (over 8m in length with enormous jaws and long, serrated teeth up to eight inches long) and Deltadromeus (around 8m in length, a member of the raptor family with long, unusually slender hind limbs for its size), as well as several predatory flying reptiles (pterosaurs) and crocodile-like hunters. Dr Ibrahim said: “This was arguably the most dangerous place in the history of planet Earth, a place where a human time-traveller would not last very long.”

Many of the predators were relying on an abundant supply of fish, according to co-author Professor David Martill from the University of Portsmouth. He said: “This place was filled with absolutely enormous fish, including giant coelacanths and lungfish. The coelacanth, for example, is probably four or even five times large than today’s coelacanth. There is an enormous freshwater saw shark called Onchopristis with the most fearsome of rostral teeth, they are like barbed daggers, but beautifully shiny.”

Researchers from the Universities of Detroit, Chicago, Montana, Portsmouth (UK), Leicester (UK, David Unwin), Casablanca (Morocco), and McGill (Canada), as well as the Paris Museum of Natural History, have produced the first detailed and fully illustrated account of the fossil-rich escarpment, previously known as the “Kem Kem beds.” The researchers now define this sedimentary package as the Kem Kem Group, which consists of two distinct formations, the Gara Sbaa Formation and the Douira Formation.

To assemble the huge datasets and fossil images, which were originally included in his PhD thesis, Dr Ibrahim visited Kem Kem collections on several continents.

Shedding light on Africa’s ancient past is important says Professor Martill, “This is the most comprehensive piece of work on fossil vertebrates from the Sahara in almost a century, since the famous German palaeontologist Ernst Freiherr Stromer von Reichenbach published his last major work in 1936.”

Story Source:

Materials provided by University of Portsmouth. Note: Content may be edited for style and length.

Share Button

Nursing homes prepared for pandemics, but COVID-19 reveals gaps

The COVID-19 pandemic has hit some nursing homes especially hard — including in the hotspot state of Michigan. Hundreds of deaths of residents in homes from Seattle to Boston have raised concerns about how well facilities are protecting the 1.3 million older Americans who live in them. Those concerns have prompted new federal and state requirements about testing and transparency.

But it might have been worse.

New data suggests that at least in Michigan, nursing homes that responded to a survey were far better prepared for this pandemic than they were for the last one. The study includes responses from 130 nursing homes to a survey performed during the week the state announced its first documented case of COVID-19.

It shows that nearly all had a pandemic plan in place. That’s compared with just over half of the 280 nursing homes that answered the same survey in 2007. Nearly all said they now have at least one staff member in charge of pandemic preparedness.

The findings are reported in the Journal of the American Geriatrics Society by a team from the University of Michigan that has studied and worked to improve nursing home infection prevention for years.

Members of the team have several other recent publications with direct or indirect relevance to the COVID-19 pandemic, including putting forth recommendations for nursing homes and other housing facilities for older adults to use in planning how they will respond to pandemics such as COVID-19.

Lona Mody, M.D., M.Sc., a geriatrician at Michigan Medicine, U-M’s academic medical center, and the VA Ann Arbor Healthcare System, is senior author of both of the new publications. She’s a professor of internal medicine, the associate director for clinical and translational research at the U-M Geriatrics Center, and director of the Infection Prevention in Aging research group.

“Our nursing homes house some of the most vulnerable in our society,” says Mody. “This virus unfortunately is very contagious, the disease it causes has incredibly poor outcomes in older adults with comorbidities, and nursing homes are communal settings with shared spaces and resource limitations. This creates a perfect storm of sorts. Being novel, we learn as go and have to learn really quickly.”

Mody heads the PRIISM, or Preventing Resistance and Infection by Integrating Systems in Michigan, project, which partners with skilled nursing facilities, hospitals and public health agencies across the state to perform research and create and test education and training materials for nursing home staff. The program’s website has many free materials for use by nursing homes everywhere.

Pandemic planning

The new survey data show Michigan’s nursing homes have done a lot to prepare for pandemics since the last time the U-M team performed the survey. That previous survey was taken before the H1N1 influenza pandemic of 2009, but after the H5N1 “bird flu” pandemic of 2005 raised national awareness of the importance of pandemic preparedness. Mody and colleagues published pandemic preparedness guidance for nursing homes at that time.

In mid-March of this year, 85% of nursing homes said they had stockpiled supplies before COVID-19 hit, compared with 57% after the H5N1 pandemic. Most of those that had stockpiled supplies had focused on surgical masks, gloves and hand sanitizer. Less than half had stockpiled N95 respirator masks, which are recommended by national and global health authorities for health care workers performing certain types of care on a COVID-19 patient.

Still, 42% of the nursing homes that answered a question about COVID-19-specific concerns said they were worried about running short of personal protective gear.

“Although the size and severity of COVID-19 outbreaks in some nursing homes have taken everyone by surprise, just as so much about this pandemic has, in general nursing homes knew exactly what their challenges were going to be in a pandemic — PPE shortages, staff shortages and worries that they did not have the capacity to care for COVID patients after their hospital stay.”

Nearly all now said they had trained staff on how their facility would respond in a pandemic, up from 42% in 2007. But only one-third had conducted a pandemic drill. And Mody notes that nursing homes have a much higher rate of staff turnover than hospitals — meaning that training on infection prevention and pandemic response has to be offered whenever a new person joins the organization.

Michigan’s nursing homes appear to have gotten better connected to the broader health care system in the past decade, with significantly more saying they now have communication lines established with local hospitals and public health departments.

Many also said they were drawing COVID-19 guidance not just from the Centers for Disease Control and Prevention, but also from state and local health departments. Half also received guidance from their home’s corporate parent.

And while half of the nursing homes surveyed this year said they expected significant staff shortages due to COVID-19, most of them said they had a plan to deal with that. Most planned to ask existing clinical staff to work more hours, and to redeploy non-clinical staff. Two-thirds expected they’d need to require staff to work overtime.

The survey also explored the potential for nursing homes to relieve the burden on hospitals. In all, 82% said they’d be willing to take non-pandemic patients from overburdened hospitals now, compared with 53% in 2007. But the percent that said they’d be able to accept patients with the pandemic disease stayed the same, at one-third of responding homes.

Additional guidance

Mody and her colleagues John P. Mills, M.D. and Keith Kaye, M.D. from the U-M Division of Infectious Diseases recently published some recommendations regarding COVID-19 and older adults in the journal JCI Insight. Mody and Kaye are members of the U-M Institute for Healthcare Policy and Innovation.

They note that it’s not just nursing homes with long-term residents that need to be ready to care for vulnerable older adults during pandemics.

In fact, the trend over the past decade to use nursing homes more often for short-term stays by patients who have been discharged from a hospital, and to create state and local programs that allow older adults to ‘age in place’ instead of moving to nursing homes for the long-term, have led to potential gaps for pandemic responses to help older adults.

They call for policymakers to address those gaps, by creating pandemic-specific plans for community-dwelling older adults, especially those with health needs.

As for nursing homes, they recommend that in areas where COVID-19 is spreading widely in the community, facilities should take these steps, and others:

  • place patients with known or suspected disease in the same area of the facility, away from others
  • perform rapid COVID-19 tests on all patients, both short-stay and long-stay
  • screen healthcare workers and other staff for symptoms including checking temperatures
  • limit visitors and group activities
  • require everyone wear a surgical mask
  • require additional protective gear for clinical staff

The limits on group activities tie in to other research by Mody and her colleagues, published in JAGS in December.

That study sampled surfaces, and the hands of patients and staff, in the common areas and rehabilitation gyms with in nursing homes, and looked for drug-resistant bacteria that can cause dangerous infections. Though the team didn’t look for the presence of viruses in these areas, they did find that half of the samples taken in rehab gyms contained at least one type of bacteria that was resistant to several types of antibiotics.

In addition to stockpiling PPE and cleaning supplies, the team recommends that nursing homes should use “burn calculators” to predict how quickly they’ll use those supplies based on their patient population.

If nursing homes and other residential facilities for older adults haven’t already done so, they should establish lines of communication with local health departments in advance of any outbreak of COVID-19 in their facility. They should also focus on staff retention, including providing for generous sick leave policies so that staff can stay home when ill, and hazard pay for those who can come to work.

And, the team says, nursing homes should make sure they have an infection prevention plan in place for staff when a patient has died of COVID-19.

Another gap in preparedness that the COVID-19 pandemic is revealing, Mody says, is a gap in communication with patients and their families. Keeping families informed, and enabling them to connect virtually with their loved ones when they can’t visit in person, is crucial, she says.

Share Button