Machine sucks up tiny tissue spheroids and prints them precisely

A new method of bioprinting uses aspiration of tiny biologics such as spheroids, cells and tissue strands, to precisely place them in 3D patterns either on scaffolding or without to create artificial tissues with natural properties, according to Penn State researchers.

“Tissue spheroids have been increasingly used as building blocks for fabrication of tissues, but their precise bioprinting has been a major limitation,” said Ibrahim T. Ozbolat, Hartz Family Career Development Associate Professor of Engineering Science and Mechanics. “In addition, these spheroids have been primarily bioprinted in a scaffold-free manner and could not be applied for fabrication with a scaffold.”

Using scaffolding is necessary for many applications in regenerative medicine and tissue engineering and also in fabrication of microphysiological systems for disease modeling or drug screening.

Ozbolat and his team used aspiration-assisted bioprinting along with conventional micro-valve printing to create homogeneous tissues and tissues containing a variety of cells.

Aspiration-assisted bioprinting uses the power of suction to move tiny microscopic spheroids. Just as one could pick up a pea by placing a drinking straw on it and sucking through the straw, aspiration-assisted bioprinting picks up the tissue spheroid, holds the suction on the spheroid until it is placed in exactly the proper location and then releases it. The researchers report on their tissue engineering work today in Science Advances.

“Of course, we have to gently aspirate the spheroids according to their viscoelastic properties so no damage occurs in transferring the spheroids to the gel substrate,” said Ozbolat. “The spheroids need to be structurally intact and biologically viable.”

By controlling the exact placement and type of spheroid, the researchers have been able to create samples of heterocellular tissues, those containing different types of cells.

“We demonstrated for the first time that by controlling the location and distance between spheroids we can mediate collective capillary sprouting,” said Ozbolat.

The researchers were able to create a matrix of spheroids with capillary sprouting in the desired directions. Capillaries are necessary for creation of tissues that can grow and continue to live. They are a means of delivering oxygen and nutrients to the cells, without which, cells will die. Without capillaries, only the outermost cells will receive oxygen and nutrients.

Precise placement of spheroids also allows creation of heterocellular tissues like bone. By beginning with human mesenchymal stem cells, the researchers found that the cells differentiated and self assembled bone tissue.

The ability to produce artificial living tissues is valuable in areas outside of regenerative medicine. Frequently, tissue samples are necessary to test drugs or screen other chemical products. Producing specific tissues for each purpose could help in these endeavors.

The researchers suggest that this method can be cost effective because the equipment required costs under $1,000 and is easy to use. They report that the system “can be useful in a wide variety of applications, including but not limited to organ-on-a-chip devices, drug testing devices, microfluidic, in vitro human disease models, organoid engineering, biofabrication and tissue engineering, biocomputing and biophysics.”

They do note that the system still needs improvement to print spheroids in high-throughput to create larger tissues in a shorter time.

There may also be other, out-of-the-box uses for this system. Ozbolat suggests that bioprinting of electric eel electrocytes that produce an electric current might lead to living batteries in the future.

Also working on this project from Penn State are Bugra Ayan, graduate student; Dong Nyoung Heo, recent postdoctoral fellow: Zhifeng Zhang and Adomas Povilanskas, former graduate students; and Corina Drapaca, associate professor; all in engineering science and mechanics, and Madhuri Dey, graduate student in chemistry.

The National Science Foundation, the National Institutes of Health and Penn State’s Materials Research Institute supported this work.

Story Source:

Materials provided by Penn State. Original written by A’ndrea Elyse Messer. Note: Content may be edited for style and length.

Share Button

Coronavirus: Emergency legislation ‘will protect NHS volunteers’

New measures in an upcoming bill will also see an expansion of the use of video hearings in courts.

Share Button

Low blood pressure linked to high mortality in older adults

that found a link between low blood pressure and higher mortality rates.

A largescale study led by the University of Exeter, published in Age and Ageing and funded by NIHR, analysed 415,980 electronic medical records of older adults in England.

The research was conducted after some countries have changed blood pressure guidelines to encourage clinicians to take measures to reduce blood pressure in a bid to improve health outcomes. UK blood pressure guidelines are within safe parameters for all. However, previous research has not considered the impact on frail older adults, who are often omitted from trials.

The team found that people aged 75 or over with low blood pressure (below 130 / 80) had increased mortality rates in the follow-up, compared to those with normal blood pressure. This was especially pronounced in ‘frail’ individuals, who had 62 per cent increased risk of death during the ten year follow-up.

Although high blood pressure increased risk of cardiovascular incidents, such as heart attacks, it was not linked to higher mortality in frail adults over 75. Older people aged 85 and over who had raised blood pressure actually had reduced mortality rates, compared to those with lower blood pressure, regardless of whether they were frail or not.

Jane Masoli, a geriatrician and NIHR Doctoral Research Fellow, who led the study as part of her PhD at the University of Exeter, said: “Internationally, guidelines are moving towards tight blood pressure targets, but our findings indicate that this may not be appropriate in frail older adults. We need more research to ascertain whether aggressive blood pressure control is safe in older adults, and then for which patient groups there may be benefit, so we can move towards more personalised blood pressure management in older adults.”

She added: “We know that treating blood pressure helps to prevent strokes and heart attacks and we would not advise anyone to stop taking their medications unless guided by their doctor.”

Story Source:

Materials provided by University of Exeter. Note: Content may be edited for style and length.

Share Button

Coronavirus: Ambulance chiefs consider facial hair ban

London paramedics are asked to shave but plans to order them to do so have been put on hold.

Share Button

Reducing Mental Effort – Part 6

Our series on reducing mental effort continues.

Do less

One often overlooked way to reduce mental effort is simply to do less. Pull back from obligations. Decline invitations. Withdraw from projects till your plate is less full.

Working with a very full plate can be stimulating, but it’s best as a short-term condition. In the long run, it’s great to have excess capacity, especially for developing fresh creative ideas, investing in some long-term projects that will never be urgent, and rejuvenating yourself.

When everything on your plate becomes a have-to, especially when there’s constant urgency involved, you never get around to those important but never urgent items that could make a real difference in your life. Yet those are the projects that often grant the greatest feelings of satisfaction.

Remember the high cost of saying yes. You can only fit so much into your life, so make each yes as high-value as you can. A good standard here is to ask whether a yes is closer to a “hell yes” or a “mostly yes.” If you fill your plate with the latter, you may not have the capacity to accept or even to recognize when a true “hell yes” comes along.

Consider that one really good “hell yes” opportunity can produce greater results than lots of “mostly yes” obligations combined. Saving some capacity for the occasional “hell yes” could save you a lot more mental effort in the long run.

Make planning time sacred

Doing even a modest amount of planning for your weeks and days can save you a lot of effort later. Whatever you invest in planning, you’ll usually make up for many times over in saved execution time.

When we get overly busy, planning is often one of the first activities we cut because planning doesn’t immediately appear to more workflow forward. However, to reduce mental effort, it’s important to do the opposite. When the time crunch is coming up, carving time out for some sensible planning can make a big difference.

Sometimes when I feel exceedingly busy, I pause for a few minutes to sketch out a simple plan for how to achieve what I’d like to achieve. Often this involves deciding which aspects are truly important and need to be done soon versus those aspects that could wait or be cut.

A tip I learned from Brian Tracy is to occasionally pause and ask two questions:

  • What am I trying to do?
  • How am I trying to do it?

If all you do is ask and answer those two questions, you have the basics of a simple planning approach.

Ideally it’s wise to make planning a long-term habit. Many people map out their days the night before, which is a good start.

As Stephen Covey noted in the book First Things First, weekly rhythms are usually the best for routine planning because a week is a long enough time frame to address most (or all) of your important roles. You can’t necessarily give much attention to every important role in a single day though.

Do your best to treat planning time as sacred, even when you’re tempted to skip it or cut it. You may carve out an hour or two on a weekend to plan your week as many people do. I often like to begin the week with a planning session on Monday morning because that’s a time when I’m freshest mentally and emotionally, after I’ve taken some restoration time over the weekend and let go of the previous week.

Decide first; then do

A simple but powerful habit for smooth workflow is to separate deciding from doing.

Work in two phases. First, take some time to decide what you need to do and how you’re going to do it. Write down your action steps in order, and make them pretty granular. Don’t worry about doing any of the steps yet. Just figure out what they are, and write them down in order.

I use a daily work journal for this, which is just a basic spiral notebook. Each day, often multiple times per day, I make short lists of the action steps for whatever I need to do next. This usually takes a few minutes.

Sometimes I may list only enough steps to carry through the next 30 minutes. Other times I may list a few hours worth of steps. And sometimes I may list enough action steps to last 2-3 days.

You may wonder if it’s enough to have a typed to-do list on one of your devices. I think that’s fine, but I still recommend writing down the action steps with pen and paper as part of your daily flow, even if you’re just copying them directly from a screen. I’ve experimented with this a lot, and for some reason I find that handwriting the action steps and crossing them off as I do them is way more satisfying than checking off or deleting items on a screen-based list. I also find that writing the steps makes me feel more committed to doing them. The handwritten list feels more personal and makes me feel like I own it. A screen-based list feels a bit more distant. A handwritten list on a screen (like with an Apple Pencil) still doesn’t quite feel as good as simple pen and paper. I suggest you do your own experimenting here to discover what gives you the best feelings of commitment, progress, and flow.

Once you have your steps listed, you can focus on doing. There’s no need to occupy part of your brain with figuring out what needs to be done once you’ve already made those decisions. You can just do one step at a time, checking each one off as you complete it.

You may even gain a small sense of accomplishment just from creating the to-do list – a boost which can help you flow into the action phase with a little more motivation.

Mixing deciding and doing tends to be less efficient than separating these phases. The mind goes into different modes of thinking for each phase, so it can devote all its best resources to one type of thought.

What if you run into a snag in your doing phase, and you realize that your original action sequence won’t work? If you no longer have good cause to trust your existing list, go ahead and switch back to decision mode. You may be able to modify the remainder of your current list, or you may feel that it’s best to drop the old list and create a fresh one.

We’ll continue with Part 7 of this series tomorrow.

Share Button

Health24.com | Imaging scans may lead to shorter TB treatment

A new monitoring approach could help improve treatment of patients with tuberculosis (TB), researchers say.

TB is an infectious disease that primarily affects the lungs. Treatment involves multiple pills or injection drugs daily for at least six months. Successful treatment depends on the medications reaching pockets of TB bacteria in the lungs.

Researchers have developed a system using CT and PET scans to see whether a key medicine called rifampin is reaching those lung areas of TB bacteria.

“Up until now, the only way we’ve known that rifampin sometimes does not reach the bacteria inside cavities has been by examining portions of lungs surgically resected [removed] from patients for whom standard anti-TB therapy failed,” said study lead author Dr Alvaro Ordonez, a research associate in paediatrics at Johns Hopkins Medicine in Baltimore.

Lesions and cavities

The non-invasive imaging technique is called dynamic 11C-rifampin PET/CT. A trial in 12 TB patients is described in a study published in the journal Nature Medicine.

The researchers explained that the new technique used a tagged version of the drug, 11C-rifampin, allowing doctors to view its concentration in the lungs using PET scans. These scans revealed that the drug’s presence was lowest in the TB-caused lung lesions and cavities.

“This is eye-opening since the lesions and cavities are the sites known to have the largest populations of bacteria in TB patients,” Ordonez said in a Hopkins news release. “Therefore, rifampin is not getting where we need it most.”

Using information from this technique, doctors could tailor the drug’s dose to shorten treatment time.

Promising results

“We now have evidence that imaging the lungs with PET and CT scans may help researchers and physicians better determine how much rifampin is reaching the bacteria over time, and then use the data to steer decisions for speedier and more effective TB-fighting measures such as higher doses of the drug,” said senior author Dr Sanjay Jain, professor of paediatrics, and radiology and radiological science at Hopkins School of Medicine.

Further human trials are needed to confirm the study’s promising results, the researchers noted.

TB causes about 1.5 million deaths a year worldwide, according to the World Health Organization.

Image credit: iStock

Share Button

Coronavirus: Italy reports biggest daily jump in death toll

Officials say 49 more people have died, marking the country’s largest daily increase in fatalities.

Share Button

Health24.com | What makes your food so attractive to seagulls?

Given a choice, seagulls prefer food that’s been handled by humans, a new British study finds.

This suggests that the birds may watch you when deciding what to scavenge, according to the researchers.

“We wanted to find out if gulls are simply attracted by the sight of food, or if people’s actions can draw gulls’ attention towards an item,” said study lead author Madeleine Goumas. She’s with the Centre for Ecology and Conservation at the University of Exeter in Cornwall.

“Our study shows that cues from humans may play an important part in the way gulls find food, and could partly explain why gulls have been successful in colonizing urban areas,” Goumas said in a university news release.

An easy meal

In the study, researchers placed two wrapped oat bars on the ground in front of 38 herring gulls. A researcher picked up and handled one of the bars for 20 seconds and then put it back on the ground, but did not touch the other bars.

Of the 24 gulls that pecked at one of the oat bars, 19 (79%) pecked at the one handled by a researcher.

The experiment was repeated with sponges cut into the same size and shape as the oat bars. The gulls’ preference for the handled sponge did not exceed “chance levels.” This suggests that human handling draws their attention to food in particular, according to the study. The findings were published in the journal Royal Society Open Science.

“Our findings suggest that gulls are more likely to approach food that they have seen people drop or put down, so they may associate areas where people are eating with an easy meal,” said study senior author Laura Kelley, also of the University of Exeter.

‘Generalist diet’

This highlights the importance of disposing of food waste properly, as inadvertently feeding gulls reinforces these associations, Kelley added.

Herring gulls have a “generalist diet” that typically includes fish and invertebrates, but they will also consume food found in landfills and household waste, Kelley said. “The effect of this shift in food quality and quantity away from more ‘natural’ sources is not yet clear,” she noted.

READ | Consumers waste twice as much food as experts thought

READ | Should you refrigerate your peanut butter? Here’s what nutritionists say

READ | How to put safety first when planning to pack food-to-go

Image credit: Unsplash

NEXT ON HEALTH24X

Share Button

Health24.com | Exercise surprise: lifting less gets better results

Changing up the amount of weight they lift could help weightlifters get stronger with less effort, a new study suggests.

In traditional weight training – called one rep max – the maximum weight an athlete can lift dictates the weight load for all sessions.

This study compared one rep max with an approach called load velocity profile, in which athletes lift varying weights from session to session.

Over six weeks, athletes who used the load velocity profile became stronger than those who used one rep max, despite lifting less overall, according to sports scientists at the University of Lincoln, in the UK.

Improving muscle strength

The study, published recently in the Journal of Strength and Conditioning Research included 16 men, ages 18 to 29, with at least two years’ weight training experience.

The authors said their findings could help improve lifters’ muscle strength and power and make it easier to manage fatigue during training.

“There are a lot of factors which can contribute to an athlete’s performance on a particular day, such as how much sleep they have had, nutrition or motivational factors, but with traditional percentage-based methods we would have no insight into how this effects their strength,” said study leader Harry Dorrell, a lecturer in the School of Sport and Exercise Science.

The velocity-based training let researchers adjust athletes’ load up or down as needed, he said in a university news release.

“It’s about making sure the athlete is lifting the optimal load for them, on that particular day,” Dorrell explained. “If you lift too little then you won’t stimulate the body as you intend to; but if you lift too much you’ll be fatigued, which increases the risk of injury.”

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Reducing Mental Effort – Part 5

Our series on reducing mental effort continues.

Minimize context switching

During a normal workday, it’s easy to begin new tasks without fully finishing previous tasks. Sometimes we do this for the sake of variety, but this can be a very inefficient approach.

Each time you switch contexts, your mind has to release the previous context and load in a new context. Think of a context as all of the key ideas that link with the task at hand.

It often takes 15-30 minutes to load in a new context well enough to feel like you’re in the flow of good productivity. Before you’ve loaded the relevant context, a new task tends to feel a bit alien or complicated, so you can’t work as fast. It’s like learning the contents of someone else’s kitchen when you’re staying in a new AirBnB. It takes a while to figure out where everything is. Once you’ve fully loaded in the new context though, you can work a lot faster.

For this reason it’s wise to fully finish one type of task or project – or at least drive it as far as you can – before switching contexts.

You have to balance this with your fatigue levels though because working in the same context for too many hours in a row may eventually lead to diminishing returns due to tiredness.

So while it would likely be inefficient to work on 8 different types of projects in a day due to excessive context switching, it may also be suboptimal to only work on one project all day long due to fatigue (unless that project has some decent variety, like creating a bunch of different web pages for a website). Working on 2-3 different projects may be closer to ideal. Then you’re only switching contexts a few times, and you’re switching before the fatigue of doing one type of work becomes a limiting factor.

I suggest experimenting to see how much context switching during a day is best for you. I usually work very productively with about 2-3 contexts per day, usually not more than 4. And sometimes I can be very productive working in just a single context, but then fatigue does tend to be higher at the end of the day – it feels like I’ve burnt out some circuits by overloading them a bit.

Even when you feel fatigued or burnt out doing one type of work, you may find that you still feel pretty fresh when switching to a different type of task afterwards.

Drive small projects to full completion

This suggestion is related to the above as well as to the section on solving problems fully from yesterday’s post.

To minimize context switching further, it’s often wise to drive a small project all the way across the finish line when you have its context fully loaded.

In other words, once you’ve made the effort to load the context for a project, don’t unload that context till you’re 100% done with it.

A bathroom break is fine, but try to avoid a longer break such as for a meal (unless it’s just a quick 5-minute snack).

When writing blog posts, for instance, I usually try to go from idea to publication of a new article without taking lengthy breaks in the middle. I develop the idea and do the writing, editing, and publishing in a single stretch of continuous work time, even if it’s a pretty long article. If it’s 4000+ words, I may have to break it up into multiple sessions, but I always try to at least finish a context-dependent chunk in a single stretch. For a long piece, I’ll still try to write the whole piece in one session, and then after a meal break, I may do the editing pass and then publish it. I hardly ever work on a single article across multiple days.

So the idea here is to avoid having to load the same context more than once. Whenever you take a longer break from a task or project, especially if it’s overnight or over a weekend, you have to do extra work to reload the context to get back into a productive flow. So if you can possibly drive a project to full completion with a single loading of the context for it, do your best to make that happen. It can save you a lot of mental energy – and time.

We’ll continue with Part 6 of this series tomorrow.

Share Button