Jellyfish help us understand timing of egg production

In animals, releasing eggs in a timely manner is vital to maximize the chances of successful fertilization.

However, how this process evolved and is controlled in different species is poorly understood. A new regulator of egg release has been identified in jellyfish in a new study published March 3 in the open-access journal PLOS Biology by Gonzalo Quiroga Artigas and Evelyn Houliston of Sorbonne University, France, and colleagues. The finding sheds light on how the complex hormonal control of sexual reproduction in animals evolved.

Clytia hemisphaerica is a small marine jellyfish, common across the world’s oceans. It is part of the phylum Cnidaria, a large and diverse group of invertebrate animals that includes jellies, anemones, corals, and sea urchins. While the cellular events of meiosis (chromosome shuffling and genome reduction) are similar in eggs of all animals including cnidarians and vertebrates, the hormonal control of the process to ensure that eggs are produced at the best time to maximize fertilization success differs considerably, and key steps in the regulation of cnidarian gametogenesis are only partially understood.

In Clytia, formation of mature eggs (which have one set of chromosomes) from immature oocytes (which have four) is triggered every morning by release of a maturation-inducing hormone (MIH) from the surrounding tissue when it is stimulated by light at dawn. Previous studies had identified this neuropeptide hormone, but its receptor was unknown. However, the authors knew that stimulation by MIH produced a rise in levels of the signaling molecule cyclic AMP within oocytes, and that such a rise is typically associated with activation of a type of receptor called a G-protein coupled receptor (GPCR).

From that clue, they identified 16 GPCRs from the Clytia genome that are made in oocytes. Using a synthetic MIH neuropeptide as bait, they then identified the GPCR that it stuck to most strongly, on the grounds that it was likely to be the MIH receptor (MIHR). To confirm that this receptor was involved in MIH-stimulated signaling, they mutated the MIHR gene using CRISPR/Cas9 genome editing. This mutation produced severe defects in development or release of eggs in females and of sperm in males. These effects could be mimicked by injection of an antibody that blocked part of the normal receptor, and mitigated by treatment of the mutant with an analogue of cyclic AMP, bypassing the mutant receptor and restoring the downstream signal.

The family tree of the receptor sequence showed that it is related to a large set of GPCRs in other cnidarians, and also to a set of peptide hormone receptors in vertebrates . These include receptors for hormones that regulate both sexual reproduction and feeding, including neuropeptide Y and gonadotrophin inhibitory hormone in humans.

“The discovery of this receptor will help us understand the critical process that transforms animal oocytes into eggs,” Houliston said, “and may help reveal important steps in the evolution of the hormone systems that regulate and link sexual reproduction to nutrition in animals.”

Story Source:

Materials provided by PLOS. Note: Content may be edited for style and length.

Share Button

Health24.com | Late bedtimes in preschool years could bring weight gain

Little ones who stay up late may have a higher risk of becoming overweight by the time they are school-age, a new study suggests.

Researchers found that young children who routinely got to sleep after 9pm tended to gain more body fat between the ages of two and six. Compared with kids who had earlier bedtimes, they had bigger increases in both waist size and body mass index (BMI) – an estimate of body fat based on height and weight.

The findings do not prove that later bedtimes cause excess weight gain, said Dr Nicole Glaser, who wrote a commentary accompanying the study, which was published online in Pediatrics.

But the report adds to evidence linking sleep habits to kids’ weight, according to Glaser, a paediatric endocrinologist at the University of California, Davis.

Causality difficult to establish

Specifically, studies have found higher rates of obesity among kids who either get too little sleep or have trouble falling or staying asleep.

“At this point, I think it’s clear that there is a relationship between [sleep quality and obesity risk],” Glaser said. “The big question is whether the relationship is a causal one.”

Dr Claude Marcus, senior researcher on the study, agreed. “The causality is difficult to establish,” he said.

Kids’ sleep habits do not exist in a vacuum, and it’s possible that other factors cause both late bedtimes and greater weight gain, said Marcus, a professor of paediatrics at the Karolinska Institute in Stockholm, Sweden.

For example, it’s possible that kids who stay up late are eating more at night, or that their parents put fewer limits on them in general, he said.

Marcus also pointed to stress, which could feed both poor sleep and overeating.

Obesity prevention project

Then there is what’s happening in the brain. Glaser said research shows that several brain areas that regulate the sleep-wake cycle also help govern appetite – and some of the same hormones and brain chemicals are involved.

It’s “certainly possible,” she said, that poorer sleep alters young children’s metabolism – or behaviour, like physical activity during the day.

But, Glaser added, “It’s equally possible that the association between sleep patterns and obesity simply reflects the fact that similar brain centres are involved in modulating both.”

The findings are based on 107 young children who were part of an obesity prevention project. Sixty-four had overweight or obese parents, so they were considered at high risk for excessive weight gain.

Between the ages of two and six, kids’ sleep habits were recorded for one week each year, with the help of a wrist device that monitors activity.

On average, the study found, children who routinely went to bed after 9pm showed somewhat greater gains in BMI and waist size over the years. The link was independent of total time asleep, and it remained even after the researchers accounted for factors like kids’ exercise habits and “screen time”, and parents’ education levels.

Earlier bedtime a good idea

The connection was stronger among children whose parents were obese. Their waist size grew by an average of 3.5cm more, compared to kids with earlier bedtimes and average-weight parents, the findings showed.

The researchers said that might mean late bedtimes made it more likely that high-risk kids would gain extra weight. Or late bedtimes may simply be part of a general lifestyle that promotes obesity.

But while the cause-and-effect question remains unanswered, the message for parents may still be straightforward.

“An earlier bedtime for kids is absolutely a good idea,” Glaser said. Whether that promotes a healthier weight or not, she noted, there are other benefits, including well-rested kids and parents.

Good sleeping habits

“Parents can have some much needed quiet time and time together to recharge the batteries, so they can have more energy for their kids the next day,” she said.

Marcus said sleep should be seen as an important element of a healthy lifestyle, along with diet and exercise.

“A well-organised life with good sleeping habits may be of importance, whether it is directly affecting weight or if it is a marker of living habits in general,” he said.

Kids, like adults, do vary in how much sleep they need, according to the American Academy of Sleep Medicine. In general, the group recommends toddlers get 11 to 14 hours of sleep each day (naps included), while three- to five-year-olds should get 10 to 13 hours.

READ | How do you help when your child’s battling with a weight problem?

READ | Kids raised by grandparents more likely to pile on the kilos

READ | How much does your kid weigh? Chances are, you’re underestimating

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Reducing Mental Effort – Part 2

We continue the series on reducing mental effort.

Distracting thoughts are a major source of wasted mental energy, so in this part we’ll cover a few ways to reduce internal distractions.

Empty your head

One reason we dwell on certain thoughts is that we’re trying to remember certain to-dos, ideas, and items that require deeper consideration. Refreshing these items in our minds sucks up extra neural energy and doesn’t necessarily move much towards completion.

If your brain is using its working memory to continually bring up distracting thoughts, you can often free up extra processing power by allowing your brain to forgot. This helps you feel less mentally and emotionally fatigued as well.

A simple practice for when your mind feels cluttered and distracted is to do a brain dump. Write down every distracting thought you can think of, either on paper or one of your devices. Get the info out of your head, and externalize it somewhere.

Write down incomplete projects and unfinished items. Write down ideas that keep popping into your mind. Write down any worries or concerns. Write down anything you’ve been trying not to forget. Whatever your brain has been nagging you about, dump it onto paper or a screen.

Really squeeze your brain to get this info out, even if you have to do a few sessions over a few days.

This practice allows your brain to relax more, knowing that it can reference those details somewhere else instead of having to refresh the info internally. Even if your brain dump list is in random order and looks chaotic, it’s still a big step forward. Your brain can let go of having to refresh the info as often, which means less neural energy wasted and more neural energy available for you to use productively.

You may find this experience a bit overwhelming at first, especially if you see that you’ve been stuffing way too much into your working memory. When it all drains onto the page or the screen, you may see that it’s a lot, perhaps more than you can realistically deal with. But you may also discover that your mind feels more peaceful and relaxed afterwards. It’s more restful for the mind when it knows that it doesn’t have to keep refreshing all of this info internally.

Organize your tasks and projects

Another step is to process and prioritize some of that info you’ve just dumped from your brain. Turn those to-dos into tasks and projects, and organize them into a list or a system, so you can track them more intelligently.

There are many tools to choose from that can help you do this. I recommend testing several of them before you choose.

My current favorite tool for keeping track of tasks and projects is Nozbe. Nozbe comes with a free 30-day trial if you want to check it out. I’ve been using it since June 2019 and appreciate the clean, straightforward interface. It’s easy to learn and fast to use, especially for individuals and small teams. I especially like that I can create reusable templates with it. It’s good at hiding complexity, so the screen layout feels restful to me.

Here’s a screen shot of my current Nozbe templates. Each template is a basically a saved to-do list that I can reuse to spawn a new project whenever I want.

Since I have some of trips coming up this year, I could use the “Plan & book next trip” template to add a few projects with these names: Plan Portland trip, Plan Northern Ireland trip, Plan Milwaukee/Chicago trip, and Plan Costa Rica trip. Each project will be pre-filled with the to-do items from the template. And then I can individually customize each project with trip-specific actions.

Using project templates frees up mental energy because I don’t have to remember common action steps for the types of projects I do repeatedly. A new course launch, for instance, has hundreds of action steps, and it’s more restful for my brain if I capture all of those steps into a system. Then I can focus on doing the action steps in the proper order when I’m in the midst of the launch, trusting that the whole plan is solid and that I haven’t forgotten anything important. My brain doesn’t have to waste energy trying not to forget something. All of the details are captured in the system.

I’ve also used Asana for about a year (mid-2018 to mid-2019), but I didn’t like their web-based interface as much, and to be honest, Asana simply annoyed me into looking for a competing option. I started with their free version and soon upgraded to their premium version. I liked the premium version, which provided everything I could want and more. But after a while, their interface started pestering me to upgrade again to a business account, which had features that were overkill and unnecessary for the size of my team. I found this distracting and counter-productive, so when someone told me about Nozbe, I gave it a try, liked it better (especially the distraction-free interface), and quickly switched.

I probably would have stuck with Asana for years if they’d been satisfied to simply let me enjoy the benefits of the premium version instead of pushing for more. I absolutely don’t want a productivity app injecting extra distractions into their interface. That just seems like a ridiculous design choice. What sense does it make to use a productivity tool that increases mental load with extra annoyances?

Your choice of tools is your choice. The best system for you is the one you’ll actually use. Take the time to find something you like, and don’t just go with what’s popular or trendy. I often find that the most popular tools that I hear people buzzing about aren’t a good fit for me – I’m often disappointed when I actually test them. In general I tend to find that the popularity of a tool tends to have more to do with its marketing than with its actual utility. So don’t beat yourself up if you’ve fallen into the trap of acquiring tools that you don’t actually use. Keep looking to find the ones you will use.

A good system should be quick and efficient to use. It should feel peaceful and relaxing. If you feel stressed when using it or if you feel you must push and discipline yourself to use it regularly, dump it. If simple pen and paper would feel better to you, go with that. Don’t overburden your mind with even more complexity when you’re trying to simplify and reduce mental clutter.

I hope you’re enjoying this series so far. We’ll continue with Part 3 tomorrow.

Share Button

Health24.com | How years of endurance exercise could change the heart’s structure

Triathlons, rowing, mountaineering, cross-country skiing: Tough exercise like this done over decades appears to reshape the heart, new research shows.

In older adults, long-term endurance exercise seems tied to an enlargement of the aorta – the large artery that carries oxygenated blood from the heart to the rest of the body. But whether that change is beneficial or harmful remains unclear, US researchers said.

It’s long been known that endurance athletes have larger hearts on average than the general population, and that heart enlargement is a healthy adaptation to exercise, the study authors noted.

But whether that’s true for the aorta isn’t clear.

Young, competitive athletes

“The prevailing wisdom is that the aorta is a relatively stable structure with minimal plasticity,” said study co-author Dr Aaron Baggish, an investigator at the cardiovascular performance programme at Massachusetts General Hospital (MGH), in Boston.

“But this concept comes from studies done almost exclusively on young competitive athletes – typically under 25 years of age,” he added in a hospital news release.

The study began after Dr Timothy Churchill, a sports cardiology fellow at MGH, noticed that a high number of older athletes were coming in for an evaluation of an enlarged aorta. Churchill wanted to determine just how common the condition was in these types of patients.

So, Baggish, Churchill and colleagues evaluated the aortas of 442 veteran endurance athletes, aged 50 to 75. All were taking part in athletic competitions across the United States.

“We set up study sites at several large-scale rowing and running events that attract high-caliber masters athletes, and did cardiac ultrasounds at the race venues,” Churchill said.

A high percentage of the athletes – 20% to 25% – had aortas that were larger than the upper limit of what’s typical in the general population.

Unresolved complications

Baggish said, “It was proof of concept for us because while we’d been seeing it in the clinic for a long time, it had never been studied in an isolated fashion.”

But whether an enlarged aorta in older endurance athletes is healthy or unhealthy is unclear, the researchers said.

Churchill explained that non-athletes with a dilated aorta are at increased risk for a leak or rupture, and death rates for patients with sudden problems involving the aorta are as high as 50%.

“We want to know whether this enlargement means the same thing in an athlete as in a non-athlete,” Churchill said.

According to Baggish, “The findings from the study are pushing us to do more science, as there are two viable yet unresolved implications of our work. The first option is that aortic enlargement among master athletes is a benign adaptation and another feature of the so-called athlete’s heart, where big is good. The alternative is that being a lifelong exerciser may cause dilation of the aorta with the [same] sort of attendant risk seen in non-athletes.”

The researchers plan to follow the athletes in this study for four to five years.

“If we find that big aortas are a benign adaptation, doctors can be reassured when they see it and not put patients through unnecessary testing and surgery. If we find that they really are an indicator of risk, then we have to think about screening people who fit this bill,” Baggish said.

Cardiac screening

Two cardiologists unconnected to the study agreed that the report raises interesting questions.

The findings “may lead cardiologists to more closely surveil these athletes for aortic dilation,” said Dr Benjamin Hirsh. He directs preventive cardiology at Northwell Health’s Sandra Atlas Bass Heart Hospital, in Manhasset, New York. But he agreed that the jury is still out on whether the dilation poses a health threat.

Dr Satjit Bhusri is a cardiologist at Lenox Hill Hospital in New York City. He said that “the major take-away is that all performance athletes should obtain cardiac screening for various heart conditions that are unique to them, including a physical exam for murmurs, and electrocardiogram, and an echocardiogram. Additional testing such as cardiopulmonary stress testing may also be beneficial in the screening process.”

The study from the team at MGH was published online in JAMA Cardiology.

READ | Only endurance exercise slows down ageing 

READ | Human endurance may have its limits, and our digestive capability could be the reason

READ | Exercise and heart disease

Image credit: iStock

Share Button

Health24.com | What is the difference between Covid-19 and coronavirus?

What is coronavirus?

The World Health Organization (WHO) defines coronaviruses as a large family of viruses that cause illness ranging from the common cold to more severe diseases.

The name comes from the Latin word “corona”, which means “crown” or “halo”, and refers to the shape of the virus particle when viewed under a microscope.

“Coronaviruses are zoonotic, meaning they are transmitted between animals and people,” the WHO says.

Common signs of infection include respiratory symptoms, fever, cough, shortness of breath and breathing difficulties. In more severe cases, infection can cause pneumonia, severe acute respiratory syndrome (SARS), kidney failure and even death, it adds. 

But what is this Covid-19 being referred to everywhere?

It’s the disease caused by a “novel coronavirus” which originated in Wuhan, China.

On February 11 the WHO named the disease Covid-19 – short for Coronavirus Disease.

According to the WHO, the responsibility for naming diseases falls with the organisation itself and “are named to enable discussion on disease prevention, spread, transmissibility, severity and treatment”.

What could cause confusion is that viruses and the diseases they cause often have different names. More familiar examples of this would be HIV – the virus, which causes the disease Aids, and rubeola – the virus, that causes measles.

So what is the name of this new coronavirus?

On the same day that the disease was named, the “novel coronavirus” was given a name, by the International Committee on Taxonomy of Viruses (ICTV).

According to the WHO, “there are different processes, and purposes, for naming viruses and diseases.

“Viruses are named based on their genetic structure to facilitate the development of diagnostic tests, vaccines and medicines.”

They add that virologists and the wider scientific community do this work, so viruses are named by the ICTV.  

The virus was named “severe acute respiratory coronavirus 2” – or SARS-CoV-2.

The WHO stresses that while the SARS CoV-2 and SARS-Cov (the major outbreak in 2003) are genetically related, they are different. 

So why are we not calling the virus by its name SARS-CoV-2?

The WHO says that “from a risk communications perspective, using the name SARS can have unintended consequences in terms of creating unnecessary fear for some populations, especially in Asia which was worst affected by the SARS outbreak in 2003”.

It says it refers to the virus carefully as “the virus responsible for Covid-19” or “the Covid-19 virus” in communications.

But, it stresses, that these terms are not meant to replace the official name.

READ | Scientists make coronavirus breakthrough which may help doctors diagnose the virus earlier

READ | Best first-line treatment for coronavirus might be existing drugs

Image credit: Getty Images

Share Button

Women with endometriosis ‘finally being believed’

MPs will hear the experiences of women with endometriosis as part of an inquiry into the condition.

Share Button

Engineers zap and unstick underwater smart glue

With a small zap of electricity, biomedical engineers at Michigan Technological University take an underwater smart glue prototype from sticky to not in seven seconds.

Turning adhesion on and off is what makes a glue smart. It’s one thing to do this in the open air and quite another under water. Inspired by nature, catechols are synthetic compounds that mimic the wet-but-still-sticky proteins secreted by mussels and offer promise for smart adhesives that work in water. The technology could help with underwater glue, wound dressings, prosthetic attachments or even making car parts and in other manufacturing.

Bruce Lee, associate professor of biomedical engineering at Michigan Tech, is a part of the Office of Naval Research’s (ONR) Young Investigator Program (YIP) and showed how to use pH to make smart underwater adhesives. Along with doctoral researcher Saleh Akram Bhuiyan, Lee developed a new method using an electrical current to turn off the adhesion of a catechol-containing material.

The team’s findings came out in the Journal of the American Chemical Society and detailed the stickiest part of the process — creating a repeatable contact mechanics test that can measure adhesion before and after a jolt of electricity.

“A lot of people have been using catechol to mimic mussels and their adhesive proteins, but applying electricity to deactivate it is new,” Lee said. “It’s more convenient than using pH like what we were using before and it should be easier to integrate with electronic devices, which means detaching could be automated and could be as simple as pushing a button.”

One day catechol adhesives may help attach equipment to the hulls of submarines but testing prototypes in scuba gear isn’t how new tech gets created. Instead, Lee and Bhuiyan need to control a suite of variables in a small lab space. Simple as it sounds, running a current through a material and checking its stickiness is actually quite difficult to do over and over again.

Bhuiyan developed a setup that uses a titanium sphere and a platinum wire electrode to apply electrical stimulation to the adhesive that is in contact with the sphere in the presence of salty water. This method makes it easy to control the voltage applied through the wire, glue and sphere as well as how salty the water is around them. The amount of time the current runs is also important. With more time, voltage and salt, the more the catechol adhesives gets oxidized and the less adhesive it becomes. With strong enough voltage, the glue detaches in only seven seconds.

“The novelty is application of the electricity and the short amount of time it takes to detach,” Bhuiyan said. “What I find most unusual about the experiment is the color change. It starts white and when I apply the electricity and the material is deactivated, it oxidizes and turns a red color — and we really like to see that red color.”

The next step in the research will be taking that red and trying to turn it back into white. The hallmark of a smart glue is not only deactivating adhesion, but turning it back on. Lee and doctoral graduate Ameya Narkar were able to accomplish this feat by playing with pH, which earned them the Bhakta Rath Research Award, and Bhuiyan hopes to apply the lessons from that research to using electrical current.

From painless bandages to underwater glue, from automotive gear to prosthetic limbs, catechol-containing adhesives are versatile and promising materials.

Story Source:

Materials provided by Michigan Technological University. Original written by Allison Mills. Note: Content may be edited for style and length.

Share Button

‘How I recovered from coronavirus and isolation’

Julie from Singapore talks candidly about being diagnosed with Covid-19 and her time in isolation.

Share Button

Coronavirus: World in ‘uncharted territory’

The World Health Organization says the virus is “unique” but stresses it can still be contained.

Share Button

Coronavirus cases in UK could rise ‘significantly’, says PM

Boris Johnson says expansion of the virus is “on the cards” in the UK, as the number of cases rises to 39.

Share Button