Oyster deaths: American slipper limpet is innocent

Natural history collections are unique archives of biodiversity. They document how living things transform over time and what effects aspects like climate change or other human-made environmental changes have on their distribution. A good example is the decline in numbers of the European oyster (Ostrea edulis) in the North Sea, which has been continuing for over 100 years. Researchers from Kiel University (CAU), in cooperation with the NORe museum association for the North and Baltic Sea region and the Senckenberg Research Institute and Natural History Museum in Frankfurt, have now managed to shine some light on this phenomenon. They have concluded that the occurrence of the invasive American slipper limpet (Crepidula fornicata) is not one of the main causes for the European oyster dying out — unlike previously assumed. The researchers published their study in the journal PLOS ONE in October.

The informative value of natural historical collections

Historical collections of the European oyster and its surrounding fauna form the basis for the new findings. The researchers investigated a total of 1,750 oysters and more than 700 slipper limpets which all found their way into the joint project’s museums and the museums in Leiden and London between 1820 and 2018. “Our unique collection by Karl August Möbius was of key importance here. This collection documented the presence of the oyster throughout Europe around 1870,” reported Dr Dirk Brandis, head of the Zoological Museum in Kiel and private lecturer at the CAU. Möbius conducted research in Kiel during the second half of the 19th century as a zoologist and ecologist. Based on his investigations of oyster presence in domestic waters, with the concept of biocoenosis he also discovered the mutual dependence of different life forms within a community. “We used the various historical archives to prove that the slipper limpet, which was introduced, had nothing to do with the European oyster dying out, although that has been assumed for a long time,” Brandis continued.

Chronological sequence of the spread of the limpet doesn’t match oyster decline

The researchers drew this conclusion from the temporal sequences, which they were now able to trace back. “Around 200 years ago, oyster fishing in the North Sea was a flourishing business,” explained Dr Dieter Fiege from the Senckenberg Research Institute and Natural History Museum in Frankfurt. He continued: “In the years afterwards, however, the Ostrea edulis numbers declined continuously. It was assumed that the appearance of the invasive slipper limpet, Crepidula fornicata, was the reason behind the dramatic decrease in oysters, along with overfishing, cold winters or diseases.”

In actual fact, the slipper limpet — which is native to the coastlines of North America — was introduced to Europe around 1870 but its presence could only be verified after 1934. “According to our findings, the decline in numbers of the European oyster population already began in the late 19th century, so well before the invasive spread of the slipper limpet. We were able to reconstruct this decline in detail,” emphasized CAU doctoral researcher, Sarah Hayer, who is conducting research at the Zoological Museum in Kiel and who accounted for the study as the lead author. “This makes it clear that the competition by an immigrant species did not cause the European oyster to die out,” added Dr Christine Ewers-Saucedo, who was chiefly responsible for collecting and analysing the data in the study at the Zoological Museum in Kiel. The real reason why the European oyster population dramatically declined in its native habitat remains unanswered.

Story Source:

Materials provided by Kiel University. Note: Content may be edited for style and length.

Share Button

‘I was put into care home for elderly at 46’

Nina Thair says the lack of services in her area meant she spent 10 months alongside dementia patients.

Share Button

General election 2019: NHS news under wraps until after polling day

Why official statistics on NHS performance are being held until after the day of voting.

Share Button

Biodiversity and wind energy

The replacement of fossil and nuclear energy sources for electricity production by renewables such as wind, sun, water and biomass is a cornerstone of Germany’s energy policy. Amongst these, wind energy production is the most important component. However, energy production from wind is not necessarily ecologically sustainable. It requires relatively large spaces for installation and operation of turbines, and bats and birds die after collisions with rotors in significant numbers. For these reasons, the location and operation of wind energy plants are often in direct conflict with the legal protection of endangered species. The almost unanimous opinion of experts from local and central government authorities, environmental NGOs and expert offices is that the current mechanisms for the protection of bats in wind power projects are insufficient. This is one conclusion from a survey by the Leibniz Institute for Zoo and Wildlife Research (Leibniz-IZW) published in the Journal of Renewable and Sustainable Energy.

More than 500 representatives of various stakeholders (expert groups) involved in the environmental impact assessment of wind turbines took part in the Leibniz-IZW survey. This group included employees of conservation agencies and government authorities, representatives of non-governmental organisations in the conservation sector, consultants, employees of wind energy companies and scientists conducting research on renewable energies or on biodiversity. The survey focused on assessments on the contribution of wind energy to the transformation of the energy system, on ecologically sustainable installation and operation of wind turbines and on possible solutions for the trade-off between tackling climate change and protecting biological diversity.

“We found both significant discrepancies and broad consensus among participants,” states Christian Voigt, department head at Leibniz-IZW and first author of the survey. “The overwhelming majority of respondents confirmed that there is a direct conflict between green electricity and bat protection. Most importantly, they considered the protection of biodiversity to be just as important as the contribution to protect the global climate through renewable energy production.” Most stakeholders agreed that small to moderate losses in the yield of wind power plants in terms of electricity production and thus in financial terms instigated by the consistent application of conservation laws must become acceptable. Possible shutdown times in electricity production should be compensated. “We will probably have to accept a higher price of green electricity for the purpose of the effective protection of bats in order to compensate for the shutdown times of wind turbines,” Voigt sums up. “This does not address the unsolved issue of how to deal with habitat loss, especially when wind turbines are placed in forests.”

The conflict between wind power projects and the objectives of biological conservation intensified in recent years because the rapidly rising number of wind plants — there are now around 30,000 on mainland Germany — has made suitable locations scarce. As a result, new plants are increasingly erected in locations where conflicts with wildlife and the protection of wildlife are more likely, for example in forests. “According to members of conservation authorities, only about 25 % of wind turbines are operated under mitigation schemes such as temporary halt of wind turbine operation during periods of high bat activity (for example during the migration season), at relatively low wind speeds and at high air temperatures even though the legal framework that protects bats would require the enforcemnt of such measures,” adds author Marcus Fritze of Leibniz-IZW. In addition, it became clear from the survey that members of the wind energy industry hold views on some aspects of the green-green dilemma that differ from those of other expert groups. “Representatives of the wind energy industry consider compliance with climate protection targets as more important than measures to protect species. All other expert groups disagree with this notion,” said Fritze. “A consistent dialogue between all participants therefore seems particularly important in order to enable ecologically sustainable wind energy production.”

The survey also showed that

  • more than 95% of respondents consider the transformation of the energy system (“Energiewende”) to be important,
  • all expert groups agreed on aiming for an ecologically sustainable energy transition,
  • two thirds of stakeholders in the wind energy industry shared the view that wind energy production should be promoted more strongly than energy production from other renewable sources whereas 85% of representatives from the other stakeholders disagreed with this,
  • 86% of the survey participants outside the wind energy sector gave green electricity no higher priority than the protection of wildlife whereas only 4% of representatives of the wind sector industry shared this opinion (almost half were undecided or consider wind power to be more important than biodiversity protection).

For the purpose of this survey, the authors selected bats as a representative group of species for all wildlife affected by wind turbines, because large numbers of bats die at turbines and they enjoy a high level of protection both nationally and internationally, and therefore play an important role in planning and approval procedures for wind turbines. Indeed, the high collision rates of bats at wind turbines may be relevant to entire bat populations. The common noctule is the most frequent victim of wind turbines; this species is rated as declining by the Federal Agency for Nature Conservation in Germany. Furthermore, the results of years of research in the department headed by Voigt at the Leibniz-IZW show that the losses affect both local bat population as well as migrating individuals. Thus, fatalities at wind turbines in Germany affect bat populations in Germany as well as populations in other European regions from where these bats originate.

On the basis of the survey results, the authors argue in favour of a stronger consideration of nature conservation objectives in the wind energy industry and for an appreciation of the targets of the conservation of biological diversity. They suggest ways in which the cooperation of those involved in the planning and operation of wind power projects can be improved that both wind energy production and the goals of biological conservation can be satisfied.

Story Source:

Materials provided by Forschungsverbund Berlin. Note: Content may be edited for style and length.

Share Button

Glass from a 3D printer

Producing glass objects using 3D printing is not easy. Only a few groups of researchers around the world have attempted to produce glass using additive methods. Some have made objects by printing molten glass, but the disadvantage is that this requires extremely high temperatures and heat-resistant equipment. Others have used powdered ceramic particles that can be printed at room temperature and then sintered later to create glass; however, objects produced in this way are not very complex.

Researchers from ETH Zurich have now used a new technique to produce complex glass objects with 3D printing. The method is based on stereolithography, one of the first 3D printing techniques developed during the 1980s. David Moore, Lorenzo Barbera, and Kunal Masania in the Complex Materials group led by ETH processor André Studart have developed a special resin that contains a plastic, and organic molecules to which glass precursors are bonded. The researchers reported their results in the latest issue of the journal Natural Materials.

Light used to “grow” objects

The resin can be processed using commercially available Digital Light Processing technology. This involves irradiating the resin with UV light patterns. Wherever the light strikes the resin, it hardens because the light sensitive components of the polymer resin cross link at the exposed points. The plastic monomers combine to form a labyrinth-like structure, creating the polymer. The ceramic-bearing molecules fill the interstices of this labyrinth.

An object can thus be built up layer by layer. The researchers can change various parameters in each layer, including pore size: weak light intensity results in large pores; intense illumination produces small pores. “We discovered that by accident, but we can use this to directly influence the pore size of the printed object,” says Masania.

The researchers are also able to modify the microstructure, layer by layer, by mixing silica with borate or phosphate and adding it to the resin. Complex objects can be made from different types of glass, or even combined in the same object using the technique.

The researchers then fire the blank produced in this way at two different temperatures: at 600?C to burn off the polymer framework and then at around 1000?C to densify the ceramic structure into glass. During the firing process, the objects shrink significantly, but become transparent and hard like window glass.

Patent application submitted

These 3D-printed glass objects are still no bigger than a die. Large glass objects, such as bottles, drinking glasses or window panes, cannot be produced in this way — which was not actually the goal of the project, emphasises Masania.

The aim was rather to prove the feasibility of producing glass objects of complex geometry using a 3D printing process. However, the new technology is not just a gimmick. The researchers applied for a patent and are currently negotiating with a major Swiss glassware dealer who wants to use the technology in his company.

Story Source:

Materials provided by ETH Zurich. Note: Content may be edited for style and length.

Share Button

Health24.com | Smallest tots spending too much time on screens

Even infants are now watching screens, and as they grow so does the time they spend doing it, two new studies show.

In fact, watching TVs, computers, smartphones, tablets or electronic games occupies about an hour a day of an infant’s time and increases to more than 150 minutes by age three. That’s way beyond what’s recommended, the researchers said.

How to restrict screen exposure

“Since screen-time exposure starts so early, it is important to continue to understand what factors play a role in forming screen-time habits,” said lead researcher Edwina Yeung. She’s an investigator in the epidemiology branch of the US National Institute of Child Health and Human Development.

“While the type of child care is not always modifiable, the awareness of its impact may help parents try new ways to restrict exposure, either from discussing screen use with caretakers or with using technologies to track the screen time,” she said.

Yeung and her colleagues collected data on the mothers of nearly 4 000 children who answered questions about their child’s media habits from the ages of one to eight.

The American Academy of Pediatrics advises that kids under 18 months of age shouldn’t be exposed to screens at all.

At 18 to 24 months, screen time should be introduced gradually and limited to an hour a day for children aged two to five, the guidelines suggest.

Yeung’s team found, however, that 87% of kids were glued to screens for far longer.

As kids reached ages seven and eight, screen time declined to about 90 minutes per day. The decline was most likely due to school activities, Yeung speculated.

Lower levels of parental education

Differences did occur between children. Screen time for about 73% of the kids increased from about an hour a day to nearly two hours. For some 27% of the children, however, screen time rose from about 30 minutes a day to about four hours.

More screen time was tied to lower levels of parental education. Also, girls were a little less likely to use screens than boys. But kids of first-time moms were more likely to use media a lot, the findings showed.

Kids kept at home rather than put in day care were more than twice as likely to have lots of screen time, the study authors noted.

Reshma Naidoo, director of cognitive neuroscience at Nicklaus Children’s Hospital in Miami, agreed that infants should not be exposed to screens in the first 18 months of life.

“The two-dimensional images on screens are very restrictive,” she said. “Also, screens offer a lot more spontaneous reinforcement, so patience doesn’t develop and anticipation is decreased.”

But Naidoo thinks that screens are and will continue to be a bigger part of children’s lives.

“We need to change the conversation from limiting screen time and being concerned that we’re spending so much time on screens to what do we do with that screen time,” she said.

“How do we turn it into something more meaningful? Because the entire world has shifted to a more digital environment,” Naidoo said.

Findings concerning

To that end, she thinks that guidelines are needed that help parents integrate media into their kids’ lives.

It’s not only helping parents know which programmes are best, but also what activities they can do with their child after watching a program or playing a game.

In the second study, Canadian researchers found that about 79% of two-year-olds and nearly 95% of three-year-olds spent more time on screens than recommended.

Kids of moms who spent lots of time with screens also watched more media, as did kids who were kept home and not put in day care, the study found.

For this study, researchers collected data on nearly 1 600 two-year-olds and 2 000 three-year-olds.

These findings are concerning, said lead researcher Sheri Madigan, an associate professor of psychology at the University of Calgary.

“Research shows that excessive screen time in preschoolers may be problematic for their development,” Madigan said. Parents should be aware of the guidelines and find ways to limit screen time, she added.

A very different environment

Another expert said the home environment also plays a role.

“The context of the viewing plays a very important role,” said Dafna Lemish, a professor of journalism and media studies in the School of Communication and Information at Rutgers, the State University of New Jersey.

“Children’s media time is impacted by having siblings around them, or by their parents’ own media use,” Lemish said.

If the household has a TV playing in the background nonstop, the child is growing up in a very different environment and learns very different lessons about how to use media than the child growing up in a family where the TV is turned on and off selectively, Lemish said.

In homes where parents have higher levels of education, kids are usually exposed to a more enriching environment, one that includes books, games, art activities, outings and enrichment programmes that provide a host of competing and attractive ways for children to grow and develop, she said.

“Unfortunately, this is not the case for struggling families – thus the popular criticising parents for too much TV or gaming disregards structural inequalities in society more generally,” Lemish said.

Both studies were published online in JAMA Pediatrics.

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Health24.com | 4 in 5 adolescents worldwide don’t exercise enough

Four of five older children and teens around the world don’t get the recommended amount of physical activity, a new study says.

Researchers analysed data gathered between 2001 and 2016 from 1.6 million students, aged 11 to 17, in 146 countries. They found that 81% of them did not meet World Health Organization recommendations for an hour of moderate-to-vigorous physical activity every day.

‘Urgent policy action’

Girls were less active than boys in all but four countries: Tonga, Samoa, Afghanistan and Zambia. In nearly one-third of countries (29%), girls were more than 10 percentage points less likely to meet the WHO recommendations. The biggest gaps were in the United States and Ireland, at more than 15 percentage points.

In 73% of the countries, the gender gap increased between 2001 and 2016. In 2016, 90% or more of girls in 27 countries did not have sufficient levels of activity. Among boys, this occurred in only two countries.

Boys in the Philippines and girls in South Korea were the most inactive, while Bangladesh had the lowest rates of physical inactivity for both genders, according to the WHO-led study. It was published in The Lancet Child & Adolescent Health journal.

“Urgent policy action to increase physical activity is needed now, particularly to promote and retain girls’ participation in physical activity,” study author Regina Guthold said in a journal news release. She is a technical officer from Chronic Disease Risk Factor Surveillance at WHO in Geneva.

Physical inactivity can harm children’s health, the researchers noted.

Boosting physical activity

The benefits of physical activity during adolescence include improved heart, lung and muscular fitness, better bone health, and weight control. There is also growing evidence that physical activity benefits brain health and social skills.

Many of these benefits continue into adulthood, research suggests.

“The study highlights that young people have the right to play and should be provided with the opportunities to realise their right to physical and mental health and well-being,” said study co-author Fiona Bull. She is director of the Centre for Built Environment and Health at the University of Western Australia and president of the International Society for Physical Activity and Health.

“Policymakers and stakeholders should be encouraged to act now for the health of this and future young generations,” Bull said.

The researchers called for: expansion of policies and programmes known to boost adolescents’ physical activity; more action from sectors such as education, urban planning and road safety to provide more opportunities for young people to be active; and political and other leaders to promote the importance of physical activity for all people, including adolescents.

Image credit: iStock

Share Button

Building a better battery with machine learning

Designing the best molecular building blocks for battery components is like trying to create a recipe for a new kind of cake, when you have billions of potential ingredients. The challenge involves determining which ingredients work best together — or, more simply, produce an edible (or, in the case of batteries, a safe) product. But even with state-of-the-art supercomputers, scientists cannot precisely model the chemical characteristics of every molecule that could prove to be the basis of a next-generation battery material.

Instead, researchers at the U.S. Department of Energy’s (DOE) Argonne National Laboratory have turned to the power of machine learning and artificial intelligence to dramatically accelerate the process of battery discovery.

As described in two new papers, Argonne researchers first created a highly accurate database of roughly 133,000 small organic molecules that could form the basis of battery electrolytes. To do so, they used a computationally intensive model called G4MP2. This collection of molecules, however, represented only a small subset of 166 billion larger molecules that scientists wanted to probe for electrolyte candidates.

Because using G4MP2 to resolve each of the 166 billion molecules would have required an impossible amount of computing time and power, the research team used a machine learning algorithm to relate the precisely known structures from the smaller data set to much more coarsely modeled structures from the larger data set.

“When it comes to determining how these molecules work, there are big tradeoffs between accuracy and the time it takes to compute a result,” said Ian Foster, Argonne Data Science and Learning division director and author of one of the papers. “We believe that machine learning represents a way to get a molecular picture that is nearly as precise at a fraction of the computational cost.”

To provide a basis for the machine learning model, Foster and his colleagues used a less computationally taxing modeling framework based on density functional theory, a quantum mechanical modeling framework used to calculate electronic structure in large systems. Density functional theory provides a good approximation of molecular properties, but is less accurate than G4MP2.

Refining the algorithm to better ascertain information about the broader class of organic molecules involved comparing the atomic positions of the molecules computed with the highly accurate G4MP2 versus those analyzed using only density functional theory. By using G4MP2 as a gold standard, the researchers could train the density functional theory model to incorporate a correction factor, improving its accuracy while keeping computational costs down.

“The machine learning algorithm gives us a way to look at the relationship between the atoms in a large molecule and their neighbors, to see how they bond and interact, and look for similarities between those molecules and others we know quite well,” said Argonne computational scientist Logan Ward, an author of one of the studies. “This will help us to make predictions about the energies of these larger molecules or the differences between the low- and high-accuracy calculations.”

“This whole project is designed to give us the biggest picture possible of battery electrolyte candidates,” added Argonne chemist Rajeev Assary, an author of both studies. “If we are going to use a molecule for energy storage applications, we need to know properties like its stability, and we can use this machine learning to predict properties of bigger molecules more accurately.”

A paper describing the formation of the G4MP2-based dataset, “Accurate quantum chemical energies for 133,000 organic molecules,” appeared in the June 27 online issue of Chemical Science.

A second paper describing the machine learning algorithm, “Machine learning prediction of accurate atomization energies of organic molecules from low-fidelity quantum chemical calculations,” appeared in the August 27 issue of MRS Communications.

Story Source:

Materials provided by DOE/Argonne National Laboratory. Original written by Jared Sagoff. Note: Content may be edited for style and length.

Share Button

Health24.com | Regular fasting could lead to a longer, healthier life

Regular fasting is associated with lower rates of heart failure and a longer lifespan, according to two new studies.

Researchers sought to shed new light on the centuries-old debate about how fasting affects health. Recent studies have shown it contributes to reductions in blood pressure, “bad” LDL cholesterol and insulin resistance, a condition that can raise blood sugar. A 2017 study showed alternate-day fasting was as effective as daily calorie restriction for losing weight and keeping the pounds off.

A profound effect

The new studies focused on data from patients evaluated for heart disease in Utah and other Rocky Mountain states. The research included hundreds of members of The Church of Jesus Christ of Latter-day Saints, also known as Mormons, who typically fast one Sunday each month, for up to 24 hours.

In the first study, researchers zeroed in on how fasting impacts life span. About 2 000 people who had undergone a cardiac catheterisation procedure were followed for an average of 4.4 years, including 389 “routine fasters” who had been fasting regularly for at least five years.

After adjusting for various factors, researchers discovered the routine fasters had a 45% lower mortality rate than the non-fasters during the follow-up period.

“It’s very interesting … it’s a more profound effect than we anticipated,” said researcher Dr Benjamin Horne, who recently presented the preliminary findings at the American Heart Association’s Scientific Sessions.

Horne also was involved in the second fasting study, which used the same patient data to see how routine fasting affects heart failure and heart attacks. After adjusting for various factors, there was no significant difference in heart attacks, but routine fasters had a 71% lower rate of developing heart failure than non-fasters.

A very different lifestyle

“That’s a huge difference, and frankly, it was a little unexpected,” said Horne, director of cardiovascular and genetic epidemiology at Intermountain Medical Center in Salt Lake City, Utah.

Krista Varady, an associate professor of nutrition at the University of Illinois at Chicago, called it “an important study that hasn’t been done before. There’s a lot of short-term clinical trials for intermittent fasting, but we definitely don’t have any long-term data in humans looking at whether it can prevent things like heart failure.”

Varady, who was not involved in the research, said the study was limited by the fact that most of the fasters were Latter-day Saints.

“They lead a very different lifestyle compared to the average American,” she said. “For instance, they don’t smoke, don’t drink alcohol and are slightly more physically active. It just makes sense they’re going to live longer and have a lower chance of heart disease.”

Even though researchers adjusted for some of those factors, she said, “It is very difficult to tease apart the effects of fasting versus an otherwise healthy lifestyle in this population, despite the use of statistical corrections.”

The hours build up

A number of hot diet trends encourage people to restrict their eating to a window of eight to 12 hours and fasting the remaining 12 to 16 hours. But participants in the two new studies fasted even more hours each day, over the course of an average of 42.2 years, Horne said.

“We think that long-term fasting of about one day, once a month, over a period of decades is making the body activate those beneficial mechanisms for a few hours each day between dinner and breakfast when it usually wouldn’t. … Those hours build up over long periods of time and provide the benefits,” he said.

The research was limited by being an observational study that doesn’t prove cause and effect, Horne said. He’d like to see future studies that explore why fasting seems to protect against heart failure, and he also called for a large study on the psychological benefits of fasting.

“Some people who’ve started fasting say they unexpectedly feel they have more self-control over their appetite,” he said. “Potentially, there’s a direct result between fasting and the strengthening of the mind so people are able to eat a better diet.”

Varady called for future studies that follow people who restrict eating in a variety of ways – such time-restrictive fasters and alternate-day fasters. “This is a nice first step, but we need to do long-term research on different people doing different types of fasting.”

Image credit: iStock

Share Button

‘Proof NHS at risk under US trade deal’ – Labour

Jeremy Corbyn says his party has a 451-page dossier of evidence – but the Tories say he is lying.

Share Button