Highly effective tumor detection strategy for common childhood brain tumors

A team of scientists at Texas A&M University, Baylor College of Medicine and Texas Children’s Hospital have developed a way to more accurately both detect and monitor a common type of pediatric brain cancer, setting the stage for giving clinicians a real-time view into how the cancer responds to treatment.

Medulloblastoma (MB), the most common pediatric brain tumor, is currently diagnosed based on clinical symptoms, examination of magnetic resonance imaging (MRI) scans and tumor biopsies. It is then monitored through routine MRIs to measure physical changes in the tumor. Clinicians also perform repeated lumbar punctures, commonly known as spinal taps, to collect cerebrospinal fluid (CSF) that is tested for the presence of tumor cells.

“If there are no tumor cells in the CSF, clinicians likely believe their treatment is effective and continue the course. However, there is often inconsistency between the CSF test results and the patient’s final outcome,” said Jia Li, PhD, research assistant professor in the Center for Epigenetics & Disease Prevention (CEDP) at the Texas A&M Institute of Biosciences and Technology, and the first author of the study, published in Science Advances. “Therefore, it is highly desirable to have a more sensitive way to systematically estimate and monitor the tumor response after treatment and, at the same time, confidently detect tumor recurrence before there is evident anatomical changes in the tumor seen through MRI or CT scans.”

In other words, clinicians want to be able to monitor the state of the tumor in patients so they can intervene at the earliest possible time if there is evidence that the tumor has recurred or is starting to grow aggressively again. Liquid biopsy — the method of detecting cancer DNA or other disease biomarkers in body fluids like blood — is increasingly being used to monitor adult cancers such as colorectal cancer and breast cancer. This technique is a relatively non-invasive way to assess cancer progression, response to therapy and recurrence. The current technology detects gene mutations associated with cancer within plasma. However, this approach is more challenging for pediatric brain cancers because these cancers often have very few mutations. According to the researchers, they can be described as being “genetically bland,” meaning they don’t harbor huge numbers of mutations to the DNA itself.

Instead, pediatric brain tumors frequently have epigenetic changes. In other words, instead of the DNA itself being changed by mutation, in the cancer cells, certain critical genes are turned on or turned off by epigenetic changes that regulate their activity. The presence of epigenetic abnormalities in pediatric brain cancers led the research team to reason that epigenetic markers in biological fluids such as CSF could be an effective way to detect and monitor these types of cancers.

The other problem with using liquid biopsy for pediatric brain cancer is that brain tumor DNA is scarcely detectable in plasma because of the blood-brain barrier, which prevents brain tumor DNA from being released into the blood stream. In contrast, CSF interacts with brain tumor cells in the central nervous system and can be used for liquid biopsy. However, CSF contains extremely low amounts of DNA, making it difficult to study.

Li, along with Yun Nancy Huang, PhD, MS, and Deqiang Sun, PhD, developed a new method to get around this issue and successfully profiled DNA methylation genome-wide from very low amounts of DNA in CSF. They used CSF samples obtained from a biobank built by physicians at Texas Children’s Hospital over the course of 20 years. “Tumor cells in the CSF degrade during circulation, but DNA lasts much longer than cells, and so cell-free tumor DNA (ctDNA) can be found in the biobank samples,” said Huang, who is an associate professor in the CEDP and a co-corresponding author of this study.

The researchers developed an experimental and computational method for analyzing this DNA. Their results revealed that the epigenetic marker, DNA methylation, can be detected in ctDNA from CSF, serving as a potential biomarker to report the status of the MB tumor and allow for prognosis.

“This is essentially a completely novel way of detecting DNA methylation in circulating DNA and using it for biomarker detection and quantitation in childhood cancer,” said Peter Davies, MD, PhD, professor at the Texas A&M University College of Medicine and director of the Center for Translational Cancer Research at the Institute of Biosciences and Technology, and co-author of the study.

Eventually, this research will lead to development of a biomarker kit that clinicians will be able to use for monitoring pediatric brain tumor patients. Many steps lay ahead toward that end, but these findings have generated much interest from physicians and show promise for clinical application.

“The biobank built by physicians at Texas Children’s Hospital is an invaluable resource,” Davies said. “All the samples were donated by patients with informed consent, and ultimately, it’s the willingness of patients and their families to allow their samples to be stored for future research that makes this kind of work possible.”

“This is a classic example of using ‘team science’ to answer really important questions that couldn’t be done without bringing together unique expertise,” said CEDP Director Roderick Dashwood, PhD, FRSB, professor at the College of Medicine, and co-author of the study. “We have unique expertise in the Texas Medical Center, but you need to bring these outstanding people together. That includes physicians, bioinformaticians and epigenetic experts. Those individuals are often located at different institutions, but we’re bringing them all together to address very important questions for clinical translation.”

Share Button

Covid: No safety concerns found with Oxford vaccine trial after Brazil death

Oxford University says a review has found no safety concerns after the Brazilian volunteer’s death.

Share Button

Covid: UK on course for ‘tens of thousands’ more deaths

A government adviser gave MPs his view during evidence on lessons learned from the pandemic.

Share Button

AI and Character Design

One thing I have to do ASAP for my novel writing project is to figure out some character and plot ideas. I don’t already have a story in mind, and I haven’t figured out any characters. I haven’t even picked a genre, so I’m really starting from scratch here. I’d love to have at least a basic sketch of what kind of story I’m going to write by November 1st when NaNoWriMo officially starts.

I can lean on past role-playing experience to help with some details of character design, but I also prefer to trust in the flow of inspiration and see where that leads.

One idea that randomly popped into my mind a few days ago was to leverage AI for some character design creative inspiration. I thought it would be cool to generate some random faces with ThisPersonDoesNotExist.com as a creative tool. Since humans are such visual creatives, myself included, why not start with figuring out a character’s appearance first?

While I could start with abstract qualities or other character traits, there’s something about starting with faces that appeals to me. Imagine if you assembled a gallery of pics of all of your main characters. That alone feels like progress.

Yesterday I used that site to generate lots of random faces, and I saved about 100 of them. Some of the images are a bit deformed, but most look very realistic.

Now and then I’ll see a face that makes me curious. Who is this person? What is their backstory? Might this become an interesting character to explore in my novel?

Here are some samples from the collection I saved. I haven’t designed characters based on any of these. Right now I’m just assembling a collection for brainstorming purposes.

When I find an image that captivates me in some small way, I can daydream about the fictional person and see if it leads somewhere enticing. I can invite my mind to suggest details from their backstory.

That woman looks like she works for a tech company.

That guy looks like a little sinister.

That little girl looks wise beyond her years.

This person is probably comfortable on a stage.

Scrivener is popular writing software that I’ve been using for years, especially for designing courses, so I’m using it using it for my novel project as well. I just started that project with the built-in Novel template. In Scrivener it’s easy to add images to character sheets and even to display the cast of characters visually. So when I find an image I want to use for character inspiration, I can drag and drop that image into my novel doc and then design a character around it. I like the idea of being able to display my characters visually. That makes them feel more real to me, like it’s a real group of people inviting me to tell their stories.

With AI-generated images, the output is pretty random, so I may have to generate a lot of images to find ones I like. But it’s easy enough to open five or more browser tabs and just keep refreshing till something interesting comes up.

Since these images aren’t real people, they don’t carry the baggage of previous associations, so I feel free to construct their identities from scratch. If I used pictures of actual actors to remind me of my characters, their pics might bias my writing to align with other roles those actors have already played.

I like that this approach encourages diversity in my character set too. The AI generates images of different ages, races, and genders, including some faces that look androgynous.

These images may also help me consider details that I might have otherwise overlooked, like whether a character wears glasses, has facial hair, or likes baseball caps. I still have to use my imagination to fully design each character, but starting with a photo seems like a nice way to begin. From the face I may figure out the person’s name and a few other traits, and that gets me into their story.

When I would lead friends through role-playing adventures many years ago, I enjoyed designing interesting characters with goals that would conflict with the players’ goals. Some wild and fascinating stories emerged from this collision of goals. I think a similar approach could work for writing a novel. Design a variety of interesting characters who have conflicting goals and interests, let them collide, and see what type of story emerges from that.

I see this AI-based approach as one tool that I can use to the extent I find it helpful, but I don’t have to use it for every character. It’s not a substitute for other design tools and methods, just a supplement. I think it has promise though. Maybe it’s a bit geeky, but it’s getting me into thinking about character design.

This simple idea makes me wonder what other ways I could leverage some AI assistance for extra creative inspiration.

Someday in the future, I imagine making a bowl of popcorn and saying to an AI: Generate a two-hour movie based on my novel, and play it when ready. And then the next day: Now generate the sequel that I haven’t written yet.

You do realize that it’s only a matter of time before that’s a real thing, right?

Share Button

Health24.com | Vaping and lung damage in teens: What’s the real link?

  • Researchers found that e-cigarettes alone weren’t an issue with increased wheezing in teens
  • Other tobacco-related causes were found also to play a role in wheezing 
  • This finding should, however, not create the impression that vaping isn’t harmful to health

The purported link between e-cigarettes and lung damage might be more complicated than first thought, a new study reports.

Teen e-cigarette users are not more likely to have wheezing episodes than non-users, researchers found – but only after taking into account a host of other tobacco-related factors also at play.

“We were surprised to find that use of e-cigarettes alone wasn’t an issue with increased odds of experiencing wheezing,” said lead researcher Alayna Tackett.

“I really think this data shows we need to keep looking to better understand this relationship,” added Tackett, an assistant professor of preventive medicine at the University of Southern California Keck School of Medicine, in Los Angeles.

Many potential respiratory problems

Household rules about the use of tobacco, secondhand exposure to regular cigarettes, and current use of combustible tobacco products appear to drive the observed link between e-cigarettes and wheezing problems among the young, Tackett said.

Once researchers control for those factors, the association between teen e-cigarette use and wheezing becomes statistically insignificant.

However, Tackett noted that this study only looked at wheezing, one of many potential respiratory problems associated with vaping.

“I don’t want the takeaway to be that vaping is not bad. This study doesn’t answer that question,” Tackett said. “The respiratory system is complex, and wheeze is just one indicator of respiratory health.”

E-cigarettes continue to grow in popularity among teenagers. There was a 75% increase in vaping among US high school students between 2017 and 2018, researchers said in background notes.

Difficult to disentangle symptoms

The concern for lung health is that e-cigarette vapour contains potentially harmful chemicals, researchers said, and some prior studies have linked vaping to bronchitis, coughing and phlegm among teenage users.

For this study, researchers used data on more than 7 000 US teenagers without asthma. The information was gathered as part of the Population Assessment of Tobacco and Health (PATH) study, a long-term study of the effects of tobacco use on kids and adults.

Initially, the data showed that the odds of wheezing in the past year were 74% higher for teens who’d vaped than for those who hadn’t, the study authors said.

But when researchers accounted for other variables related to household and personal tobacco use, the association became insignificant.

“It becomes difficult to disentangle which symptoms are driving this association,” Tackett said.

Still a risk over time

Dr Len Horovitz, a pulmonary specialist with Lenox Hill Hospital in New York City, is sceptical of these findings because teens were required to report their own symptoms in the PATH study, “so the respondents may minimise their symptoms”.

“Vaping anything is still a risk for lung injury over time,” Horovitz said.

Tackett agreed that future studies on e-cigarette safety need to look at a broader range of lung symptoms, and use scientific equipment to measure lung function.

For example, the study “didn’t include objective measures to assess lung capacity or airway inflammation, because wheeze is an indicator of narrowed or inflamed airways,” Tackett said. “Adding those additional objective measures is really going to be important moving forward so we can better understand this relationship and what’s driving these associations.”

The new study was published online on 13 October in JAMA Network Open.

Image credit: Unsplash

Share Button

Health24.com | Marijuana use while pregnant tied to higher odds for autism in kids

  • Pregnant women use dagga for recreational purposes as well as to manage pain and morning sickness
  • This may, besides other conditions, increase the risk of autism in their offspring, according to a new study
  • The study, however, doesn’t show that using pot during pregnancy definitively causes autism 

Research has shown that dagga use during pregnancy may increase the risk of stillborn birth, preterm birth and low birth weight.

Now, a new study adds another danger: children whose mothers used marijuana while pregnant could be at greater risk for autism.

And the increased danger wasn’t slight: Using data on every birth in Ontario, Canada, between April 2007 and March 2012, the University of Ottawa researchers found that pregnant women who used cannabis were 1.5 times more likely to have a child with autism than women who didn’t.

Adverse birth outcomes

There were half a million women included in the sample, and around 3 000 of them said they used pot during their pregnancy. The database did not include the particulars of these women’s dagga use – such as how, how often, or how much they were using it.

In a previous study, the same researchers found that pot use during pregnancy was linked to an increased risk of preterm birth and other adverse birth outcomes.

The researchers used this new study to determine if there were more long-term health impacts for children whose mothers used marijuana while pregnant.

They did this by matching two Canadian health databases, one that tracks diagnoses (including autism) and one that tracks birth outcomes in general, said study author Dr Darine El-Chaar, a maternal foetal medicine physician at the Ottawa Hospital.

“There’s been a linkage through these two registries, so we can match the birth data with the outcomes of the babies from that pregnancy later in life,” El-Chaar explained.

To show that dagga use alone was linked to the increased risk of autism, the researchers looked specifically at 2 200 women who used pot but did not use other substances during their pregnancy.

Treating morning sickness

Still, numerous factors could contribute to an increased risk of autism, El-Chaar noted. The study only shows that using pot during pregnancy may be associated with autism – not that it definitively causes it.

The findings were published online in August in the journal Nature Medicine.

Pregnant women who use pot are not only doing so for recreational purposes – some say that they use it to treat pain or morning sickness.

El-Chaar said that many of the patients she works with either use dagga to alleviate nausea or ask her if they should. “I do see women telling me that that’s the only thing that helps,” she said. “I generally do not have good evidence to say, ‘Yes, that’s true,’ yet.”

The mechanism by which pot use during pregnancy may affect birth outcomes and infant health is not fully understood. Still, most experts point to animal studies that have found cannabis receptors in the brains of animal embryos that are only five to six weeks old.

When a pregnant woman consumes pot, these cannabis receptors would be activated, potentially affecting the infant’s brain development.

Legalisation could prompt rise in marijuana use

The number of women who used pot during pregnancy may be much higher than the study reported since some may have denied using it because recreational pot was illegal when the data was collected.

Canada’s nationwide legalisation of recreational cannabis in 2018 was a catalyst for the study, according to El-Chaar.

She said she was concerned that legalisation could prompt a rise in marijuana use among pregnant women, despite the lack of evidence that it is safe.

Marijuana use among pregnant women in the United States is already on the rise, according to the US National Institute on Drug Abuse: 7% of pregnant women reported using the drug in a 2016–2017 survey.

Andrea Roberts, a senior research scientist at Harvard T.H. Chan School of Public Health in Boston, shared similar concerns that women might interpret legalisation as a sign that dagga is “somehow harmless”.

Roberts emphasised that pregnancy is a highly sensitive period, and women “should really not use any substances that they don’t have to use during pregnancy”.

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Health24.com | Vitamin D won’t reduce risk of depression

  • Vitamin D is often touted as a way to protect against depression
  • In a study, participants took vitamin D3 supplements for five years
  • The risk of depression was, however, not significantly different between those getting vitamin D supplements and those on a placebo

For those battling debilitating depression, a new study delivers some bad news: Vitamin D supplements won’t make a dent in improving mood.

While the “sunshine vitamin” is often touted as an alternative way to protect against depression, vitamin D’s efficacy has remained unknown, the researchers said.

But “there was no significant benefit from the supplement for this purpose. It did not prevent depression or improve mood,” said study author Dr Olivia Okereke, of Massachusetts General Hospital in Boston.

No significant differences in mood

For the study, more than 18 000 men and women aged 50 or older were selected to take vitamin D3 or a placebo, for an average of five years.

Many other studies have found that low levels of vitamin D were tied with a higher risk for depression.

Among the participants, the risk of depression or depressive symptoms was not significantly different between those getting vitamin D supplements and those on the placebo, the researchers found. Also, no significant differences were seen between the groups in mood.

Still, “It’s not time to throw out your vitamin D yet though, at least not without your doctor’s advice,” Okereke said in a hospital news release.

The report was published on 4 August in the Journal of the American Medical Association.

“Vitamin D is known to be essential for bone and metabolic health, but randomized trials have cast doubt on many of the other presumed benefits,” said senior study author Dr JoAnn Manson, from Brigham and Women’s Hospital in Boston.

Image credit: Getty Images

Share Button

Long Covid: Who is more likely to get it?

A study suggests old age increases the risk, as does asthma, excess weight, and being female.

Share Button

High levels of microplastics released from infant feeding bottles during formula prep

New research shows that high levels of microplastics (MPs) are released from infant-feeding bottles (IFBs) during formula preparation. The research also indicates a strong relationship between heat and MP release, such that warmer liquids (formula or water used to sterilise bottles) result in far greater release of MPs.

In response, the researchers involved — from AMBER, the SFI Research Centre for Advanced Materials and Bioengineering Research, TrinityHaus and the Schools of Engineering and Chemistry at Trinity College Dublin — have developed a set of recommendations for infant formula preparation when using plastic IFBs that minimise MP release.

Led by Dr Jing Jing Wang, Professor John Boland and Professor Liwen Xiao at Trinity, the team analysed the potential for release of MPs from polypropylene infant-feeding bottles (PP-IFBs) during formula preparation by following international guidelines. They also estimated the exposure of 12-month-old infants to MPs in 48 countries and regions and have just published their findings in the high-profile journal Nature Food.

Key findings

  • PP-IFBs can release up to 16 million MPs and trillions of smaller nanoplastics per litre. Sterilisation and exposure to high temperature water significantly increase microplastic release from 0.6 million to 55 million particles/l when temperature increases from 25 to 95 °C
  • Other polypropylene plastic-ware products (kettles, lunchboxes) release similar levels of MPs
  • The team undertook a global survey and estimated the exposure of 12-month-old infants to microplastics in 48 regions. Following current guidelines1 for infant-feeding bottle sterilisation and feeding formula preparation the average daily exposure level for infants is in excess of 1 million MPs. Oceania, North America and Europe have the highest levels of potential exposure, at 2,100,000, 2,280,000, and 2,610,000 particles/day, respectively
  • The level of microplastics released from PP-IFBs can be significantly reduced by following modified sterilisation and formula preparation procedures

Recommended sterilisation and formula preparation procedures

  • Sterilising infant feeding bottles
  • Sterilise the bottle following WHO recommended guidelines and allow to cool
  • Prepare sterilised water by boiling in a non-plastic kettle/cooker (e.g. glass or stainless steel)
  • Rinse the sterilised bottle using room temperature sterilised water at least 3 times

Preparing infant formula

  • Prepare hot water using a non-plastic kettle/cooker
  • Prepare infant formula in a non-plastic container using at least 70oC water. Cool to room temperature and transfer prepared formula into a high-quality plastic infant feeding bottle

Standard Precautions

  • Do not reheat prepared formula in plastic containers and avoid microwave ovens
  • Do not vigorously shake the formula in the bottle at any time
  • Do not use sonication to clean plastic infant feeding bottles

Studying microplastics through a project of scale

There is growing evidence to suggest that micro2 and nano plastics are released into our food and water sources through the chemical and physical degradation of larger plastic items. Some studies have demonstrated the potential transfer of micro and nano plastics from oceans to humans via the food chain3 but little is known about the direct release of microplastics (MPs) from plastic products through everyday use.

Polypropylene (PP) is one of the most commonly produced plastics in the world for food preparation and storage. It is used to make everyday items such as lunch boxes, kettles and infant-feeding bottles (IFBs). Despite its widespread use the capacity of PP to release microplastics was not appreciated until now.

Measuring Polypropylene microplastic release (PP-MPs) from infant feeding bottles (IFB)

Drawing on international guidelines for infant formula preparation (cleaning, sterilising, and mixing techniques), the team developed a protocol4 to quantify the PP-MPs released from 10 representative infant-feeding bottles that account for 68.8% of the global infant-feeding bottle market.

When the role of temperature on the release of PP-MPs was analysed a clear trend emerged; the higher the temperature of liquid inside the bottle, the more microplastics released.

Under a standardised protocol, after sterilisation and exposure to water at 70?C, the PP-IFBs released up to 16.2 million PP-MP per litre. When the water temperature was increased to 95?C, as much as 55 million PP-MP per litre were released, while when the PP-IFB’s were exposed to water at 25?C — well under international guidelines for sterilisation or formula preparation — 600,000 PP-MP per litre were generated.

Estimating the exposure of 12-month-old infants to MPs from PP-IFBs

Given the widespread use of PP-IFBs and the quantity of MPs released through normal daily use, the team realised the potential exposure of infants to MPs is a worldwide issue. The team estimated the exposure of 12-month-old infants to MPs in 48 countries and regions by using MP release rates from PP-IFBs, the market share of each PP-IFB, the infant daily milk-intake volume, and breastfeeding rates.

The team found that the overall average daily consumption of PP-MPs by infants per capita was 1,580,000 particles.

Oceania, North America and Europe were found to have the highest levels of potential exposure corresponding to 2,100,000, 2,280,000, and 2,610,000 particles/day, respectively.

Mitigating exposure

Given the global preference for PP-IBFs it is important to mitigate against unintended generation of micro and nanoplastics in infant formula. Based on their findings the team devised and tested a series of recommendations for the preparation of baby formula that will help minimise the production of MPs.

They note though, that given the prevalence of plastic products in daily food storage and food preparation, and the fact that every PP product tested in the study (infant bottles, kettles, lunch boxes and noodle cups) released similar levels of MPs, there is an urgent need for technological solutions.

As Professor John Boland, AMBER, CRANN, and Trinity’s School of Chemistry explains:

“When we saw these results in the lab we recognised immediately the potential impact they might have. The last thing we want is to unduly alarm parents, particularly when we don’t have sufficient information on the potential consequences of microplastics on infant health.

“We are calling on policy makers, however, to reassess the current guidelines for formula preparation when using plastic infant feeding bottles. Crucially, we have found that it is possible to mitigate the risk of ingesting microplastics by changing practices around sterilisation and formula preparation.”

Professor Liwen Xiao at TrinityHaus and Trinity’s School of Engineering said:

“Previous research has predominantly focused on human exposure to micro and nanoplastics via transfer from ocean and soils into the food chain driven by the degradation of plastics in the environment.

“Our study indicates that daily use of plastic products is an important source of microplastic release, meaning that the routes of exposure are much closer to us than previously thought. We need to urgently assess the potential risks of microplastics to human health. Understanding their fate and transport through the body following ingestion is an important focus of future research. Determining the potential consequences of microplastics on our health is critical for the management of microplastic pollution.”

Lead authors, Dr Dunzhu Li and Dr Yunhong Shi, researchers at CRANN and Trinity’s School of Engineering, said:

“We have to accept that plastics are pervasive in modern life, and that they release micro and nano plastics through everyday use. We don’t yet know the risks to human health of these tiny plastic particles, but we can develop behavioural and technological solutions and strategies to mitigate against their exposure.”

Dr Jing Jing Wang, Microplastics Group at AMBER and CRANN, said: “While this research points to the role of plastic products as a direct source of microplastic the removal of microplastics from the environment and our water supplies remains a key future challenge.

“Our team will investigate specific mechanisms of micro and nano plastic release during food preparation in a host of different contexts. We want to develop appropriate technologies that will prevent plastics degrading and effective filtration technologies that will remove micro and nanoplastics from our environment for large scale water treatment and local distribution and use.”

This work has been undertaken by the Microplastics Group led by Dr Jing Jing Wang at AMBER and CRANN, with internal collaboration from TrinityHaus and Trinity’s School of Engineering and School of Chemistry. This research was supported by Enterprise Ireland, Science Foundation Ireland, a School of Engineering Scholarship at Trinity, and the China Scholarship Council.

Share Button

NASA’s OSIRIS-REx spacecraft successfully touches asteroid

NASA’s Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer (OSIRIS-REx) spacecraft unfurled its robotic arm Tuesday, and in a first for the agency, briefly touched an asteroid to collect dust and pebbles from the surface for delivery to Earth in 2023.

This well-preserved, ancient asteroid, known as Bennu, is currently more than 200 million miles (321 million kilometers) from Earth. Bennu offers scientists a window into the early solar system as it was first taking shape billions of years ago and flinging ingredients that could have helped seed life on Earth. If Tuesday’s sample collection event, known as “Touch-And-Go” (TAG), provided enough of a sample, mission teams will command the spacecraft to begin stowing the precious primordial cargo to begin its journey back to Earth in March 2021. Otherwise, they will prepare for another attempt in January.

“This amazing first for NASA demonstrates how an incredible team from across the country came together and persevered through incredible challenges to expand the boundaries of knowledge,” said NASA Administrator Jim Bridenstine. “Our industry, academic, and international partners have made it possible to hold a piece of the most ancient solar system in our hands.”

At 1:50 p.m. EDT, OSIRIS-REx fired its thrusters to nudge itself out of orbit around Bennu. It extended the shoulder, then elbow, then wrist of its 11-foot (3.35-meter) sampling arm, known as the Touch-And-Go Sample Acquisition Mechanism (TAGSAM), and transited across Bennu while descending about a half-mile (805 meters) toward the surface. After a four-hour descent, at an altitude of approximately 410 feet (125 meters), the spacecraft executed the “Checkpoint” burn, the first of two maneuvers to allow it to precisely target the sample collection site, known as “Nightingale.”

Ten minutes later, the spacecraft fired its thrusters for the second “Matchpoint” burn to slow its descent and match the asteroid’s rotation at the time of contact. It then continued a treacherous, 11-minute coast past a boulder the size of a two-story building, nicknamed “Mount Doom,” to touch down in a clear spot in a crater on Bennu’s northern hemisphere. The size of a small parking lot, the site Nightingale site is one of the few relatively clear spots on this unexpectedly boulder-covered space rock.

“This was an incredible feat — and today we’ve advanced both science and engineering and our prospects for future missions to study these mysterious ancient storytellers of the solar system,” said Thomas Zurbuchen, associate administrator for NASA’s Science Mission Directorate at the agency’s headquarters in Washington. “A piece of primordial rock that has witnessed our solar system’s entire history may now be ready to come home for generations of scientific discovery, and we can’t wait to see what comes next.”

“After over a decade of planning, the team is overjoyed at the success of today’s sampling attempt,” said Dante Lauretta, OSIRIS-REx principal investigator at the University of Arizona in Tucson. “Even though we have some work ahead of us to determine the outcome of the event — the successful contact, the TAGSAM gas firing, and back-away from Bennu are major accomplishments for the team. I look forward to analyzing the data to determine the mass of sample collected.”

All spacecraft telemetry data indicates the TAG event executed as expected. However, it will take about a week for the OSIRIS-REx team to confirm how much sample the spacecraft collected.

Real-time data indicates the TAGSAM successfully contacted the surface and fired a burst of nitrogen gas. The gas should have stirred up dust and pebbles on Bennu’s surface, some of which should have been captured in the TAGSAM sample collection head. OSIRIS-REx engineers also confirmed that shortly after the spacecraft made contact with the surface, it fired its thrusters and safely backed away from Bennu.

“Today’s TAG maneuver was historic,” said Lori Glaze, Planetary Science Division director at NASA Headquarters in Washington. “The fact that we safely and successfully touched the surface of Bennu, in addition to all the other milestones this mission has already achieved, is a testament to the living spirit of exploration that continues to uncover the secrets of the solar system.”

“It’s hard to put into words how exciting it was to receive confirmation that the spacecraft successfully touched the surface and fired one of the gas bottles,” said Michael Moreau, OSIRIS-REx deputy project manager at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “The team can’t wait to receive the imagery from the TAG event late tonight and see how the surface of Bennu responded to the TAG event.”

The spacecraft carried out TAG autonomously, with pre-programmed instructions from engineers on Earth. Now, the OSIRIS-REx team will begin to assess whether the spacecraft grabbed any material, and, if so, how much; the goal is at least 60 grams, which is roughly equivalent to a full-size candy bar.

OSIRIS-REx engineers and scientists will use several techniques to identify and measure the sample remotely. First, they’ll compare images of the Nightingale site before and after TAG to see how much surface material moved around in response to the burst of gas.

“Our first indication of whether we were successful in collecting a sample will come on October 21 when we downlink the back-away movie from the spacecraft,” Moreau said. “If TAG made a significant disturbance of the surface, we likely collected a lot of material.”

Next, the team will try to determine the amount of sample collected. One method involves taking pictures of the TAGSAM head with a camera known as SamCam, which is devoted to documenting the sample-collection process and determining whether dust and rocks made it into the collector head. One indirect indication will be the amount of dust found around the sample collector head. OSIRIS-REx engineers also will attempt to snap photos that could, given the right lighting conditions, show the inside of the head so engineers can look for evidence of sample inside of it.

A couple of days after the SamCam images are analyzed, the spacecraft will attempt yet another method to measure the mass of the sample collected by determining the change in the spacecraft’s “moment of inertia,” a phrase that describes how mass is distributed and how it affects the rotation of the body around a central axis. This maneuver entails extending the TAGSAM arm out to the side of the spacecraft and slowly spinning the spacecraft about an axis perpendicular to the arm. This technique is analogous to a person spinning with one arm extended while holding a string with a ball attached to the end. The person can sense the mass of the ball by the tension in the string. Having performed this maneuver before TAG, and now after, engineers can measure the change in the mass of the collection head as a result of the sample inside.

“We will use the combination of data from TAG and the post-TAG images and mass measurement to assess our confidence that we have collected at least 60 grams of sample,” said Rich Burns, OSIRIS-REx project manager at Goddard. “If our confidence is high, we’ll make the decision to stow the sample on October 30.”

To store the sample, engineers will command the robotic arm to place the sample collector head into the Sample Return Capsule (SRC), located in the body of the spacecraft. The sample arm will then retract to the side of the spacecraft for the final time, the SRC will close, and the spacecraft will prepare for its departure from Bennu in March 2021 — this is the next time Bennu will be properly aligned with Earth for the most fuel-efficient return flight.

If, however, it turns out that the spacecraft did not collect enough sample at Nightingale, it will attempt another TAG maneuver on Jan. 12, 2021. If that occurs, it will touch down at the backup site called “Osprey,” which is another relatively boulder-free area inside a crater near Bennu’s equator.

OSIRIS-REx launched from Cape Canaveral Air Force Station in Florida Sept. 8, 2016. It arrived at Bennu Dec. 3, 2018, and began orbiting the asteroid for the first time on Dec. 31, 2018. The spacecraft is scheduled to return to Earth Sept. 24, 2023, when it will parachute the SRC into Utah’s west desert where scientists will be waiting to collect it.

Goddard provides overall mission management, systems engineering and the safety and mission assurance for OSIRIS-REx. Dante Lauretta of the University of Arizona, Tucson, is the principal investigator, and the University of Arizona also leads the science team and the mission’s science observation planning and data processing. Lockheed Martin Space in Denver built the spacecraft and is providing flight operations. Goddard and KinetX Aerospace are responsible for navigating the OSIRIS-REx spacecraft. OSIRIS-REx is the third mission in NASA’s New Frontiers Program, which is managed by NASA’s Marshall Space Flight Center in Huntsville, Alabama, for the agency’s Science Mission Directorate in Washington.

For more information on OSIRIS-REx:

Share Button