Air pollution contributes significantly to diabetes globally

New research links outdoor air pollution — even at levels deemed safe — to an increased risk of diabetes globally, according to a study from Washington University School of Medicine in St. Louis and the Veterans Affairs (VA) St. Louis Health Care System.

The findings raise the possibility that reducing pollution may lead to a drop in diabetes cases in heavily polluted countries such as India and less polluted ones such as the United States.

Diabetes is one of the fastest growing diseases, affecting more than 420 million people worldwide and 30 million Americans. The main drivers of diabetes include eating an unhealthy diet, having a sedentary lifestyle, and obesity, but the new research indicates the extent to which outdoor air pollution plays a role.

“Our research shows a significant link between air pollution and diabetes globally,” said Ziyad Al-Aly, MD, the study’s senior author and an assistant professor of medicine at Washington University. “We found an increased risk, even at low levels of air pollution currently considered safe by the U.S. Environmental Protection Agency (EPA) and the World Health Organization (WHO). This is important because many industry lobbying groups argue that current levels are too stringent and should be relaxed. Evidence shows that current levels are still not sufficiently safe and need to be tightened.”

The findings are published June 29 in The Lancet Planetary Health.

While growing evidence has suggested a link between air pollution and diabetes, researchers have not attempted to quantify that burden until now. “Over the past two decades, there have been bits of research about diabetes and pollution,” Al-Aly said. “We wanted to thread together the pieces for a broader, more solid understanding.”

To evaluate outdoor air pollution, the researchers looked at particulate matter, airborne microscopic pieces of dust, dirt, smoke, soot and liquid droplets. Previous studies have found that such particles can enter the lungs and invade the bloodstream, contributing to major health conditions such as heart disease, stroke, cancer and kidney disease. In diabetes, pollution is thought to reduce insulin production and trigger inflammation, preventing the body from converting blood glucose into energy that the body needs to maintain health.

Overall, the researchers estimated that pollution contributed to 3.2 million new diabetes cases globally in 2016, which represents about 14 percent of all new diabetes cases globally that year. They also estimated that 8.2 million years of healthy life were lost in 2016 due to pollution-linked diabetes, representing about 14 percent of all years of healthy life lost due to diabetes from any cause. (The measure of how many years of healthy life are lost is often referred to as “disability-adjusted life years.”)

In the United States, the study attributed 150,000 new cases of diabetes per year to air pollution and 350,000 years of healthy life lost annually.

The Washington University team, in collaboration with scientists at the Veterans Affairs’ Clinical Epidemiology Center, examined the relationship between particulate matter and the risk of diabetes by first analyzing data from 1.7 million U.S. veterans who were followed for a median of 8.5 years. The veterans did not have histories of diabetes. The researchers linked that patient data with the EPA’s land-based air monitoring systems as well as space-borne satellites operated by the National Aeronautics and Space Administration (NASA). They used several statistical models and tested the validity against controls such as ambient air sodium concentrations, which have no link to diabetes, and lower limb fractures, which have no link to outdoor air pollution, as well as the risk of developing diabetes, which exhibited a strong link to air pollution. This exercise helped the researchers weed out spurious associations.

Then, they sifted through all research related to diabetes and outdoor air pollution and devised a model to evaluate diabetes risk across various pollution levels.

Finally, they analyzed data from the Global Burden of Disease study, which is conducted annually with contributions from researchers worldwide. The data helped to estimate annual cases of diabetes and healthy years of life lost due to pollution.

The researchers also found that the overall risk of pollution-related diabetes is tilted more toward lower-income countries such as India that lack the resources for environmental mitigation systems and clean-air policies. For instance, poverty-stricken countries facing a higher diabetes-pollution risk include Afghanistan, Papua New Guinea and Guyana, while richer countries such as France, Finland and Iceland experience a lower risk. The U.S. experiences a moderate risk of pollution-related diabetes.

In the U.S., the EPA’s pollution threshold is 12 micrograms per cubic meter of air, the highest level of air pollution considered safe for the public, as set by the Clean Air Act of 1990 and updated in 2012. However, using mathematical models, Al-Aly’s team established an increased diabetes risk at 2.4 micrograms per cubic meter of air. Based on VA data, among a sample of veterans exposed to pollution at a level of between 5 to 10 micrograms per cubic meter of air, about 21 percent developed diabetes. When that exposure increases to 11.9 to 13.6 micrograms per cubic meter of air, about 24 percent of the group developed diabetes. A 3 percent difference appears small, but it represents an increase of 5,000 to 6,000 new diabetes cases per 100,000 people in a given year.

In October 2017, The Lancet Commission on pollution and health published a report outlining knowledge gaps on pollution’s harmful health effects. One of its recommendations was to define and quantify the relationship between pollution and diabetes.

“The team in St. Louis is doing important research to firm up links between pollution and health conditions such as diabetes,” said commission member Philip J. Landrigan, MD, a pediatrician and epidemiologist who is the dean for global health at Mount Sinai School of Medicine in New York and chair of its Department of Preventive Medicine. “I believe their research will have a significant global impact.”

Share Button

NHS England to stop ‘ineffective’ treatments

Tonsils removal and breast reductions are among 17 procedures that will be offered to fewer patients.

Share Button

Health24.com | How to avoid under-fuelling before your workout

If you’re frequently skipping meals or doubling up on workouts without significantly changing your meal plan, beware: Your body is going to start begging you to eat more. Not eating or drinking enough before your workout doesn’t just mess up your gains, it also puts your health at risk, increasing your chances of serious injury.

Read more: The best way to work out the biggest muscles in your body

But how do you know how much to eat – and for that matter, what should you be eating?

“In reality, most guys shouldn’t pay attention to every little kilojoule in and out, unless they start to notice a significant drop or gain in weight. But you can get a good idea about whether or not you need to increase or decrease your kilojoules and macronutrients based on your activity level and type of activity,” says NYC-based Sports Dietician, Dr Natalie Rizzo.

Luckily, a lot of this is pretty intuitive: If you’re doing more cardio/endurance-focused work, you should eat more carbs to keep you fuelled, while if you’re doing a ton of strength training, you should eat more protein to keep your muscles from wearing down, Dr Rizzo says. Because everyone’s metabolism and activity level is different, a lot of it involves just listening to your body and figuring out what works best for you.

Read more: 7 eating mistakes you make after you work out

But if you want to know exactly how to avoid getting that exhausted, totally depleted feeling midway through your workout, check out these general guidelines on how to avoid under-fuelling before your workout.

1. Eat according to your fitness goals

At the very least, you should have a snack within an hour before your workout. But in terms of larger meals, that largely depends on what kind of workout you’ll be doing.

For long bouts of endurance activity, opt for a carb-heavy meal two to three hours before a workout to give you the fuel to maintain your energy, says Dr Rizzo. “A carb-heavy diet would include tons of fresh fruit, veggies and whole grains,” such as a pasta dish with cauliflower and chicken.

For someone who wants to build muscle mass but doesn’t engage in much endurance activity, a more protein-heavy diet, featuring “lean meats, like turkey, chicken, fish and other lean sources of protein, like eggs and legumes” is best.

Read more: Big whey protein biscuits for big muscle

If you really want to get specific, there are several apps that can estimate daily kilojoule and macro intake, taking your age, gender, height, weight, goal and activity level into account.

“MyFitnessPal is a great mobile app that can estimate your macronutrients and kilojoules. Once you make a profile, it will calculate everything based on your goals,” says personal trainer Christian Cinalli.

2. Drink enough fluids

OK, so maybe eating a giant meal before your workout makes you feel sluggish. But that’s still no excuse to avoid eating or drinking altogether.

“Many men don’t want to eat before exercise because they think the food will sit in their stomach and cause cramps and belly aches. But fuelling can be as simple as drinking a 230ml glass of 100% juice,” Dr Rizzo says.

Her recommendation? One hundred percent grape juice. “It delivers fruit nutrients (like polyphenols), as well as natural sugars to energise your workout. Plus, preliminary research says 100% grape juice may help enhance exercise performance.”

3. Pay attention to your pee

Hydration is a crucial part of fuelling before your workout. If you’re even slightly dehydrated, your performance will decrease and you may be putting yourself at risk of injury.

Read more: The right amount of water to drink while you exercise

Luckily, this rule of thumb holds true, “You can assess your hydration status by the colour of your urine. Light yellow is hydrated, and dark yellow is dehydrated,” Dr Rizzo says. If your urine is darker than normal, replenish with a sports drink or a bottled water.

4. Eat a banana

We’ve said it before and we’ll say it again: A banana is one of the most solid pre-workout foods out there. “A banana is chock full of potassium and natural sugars. It provides simple fuel that is easily digestible for endurance activity,” says Dr Rizzo. Since potassium is one of the electrolytes that you sweat out during intense activity, it’s pretty important to build your potassium levels up.

Read more: Feed your muscles and your sweet tooth with this banana pumpkin protein shake

Still, Dr Rizzo says, a banana alone isn’t going do it. “You must drink fluids and take in some sodium too, if the workout lasts longer than an hour.”

Originally published on www.menshealth.com

Image credit: iStock 

NEXT ON HEALTH24X

Share Button

Health24.com | What are winter allergies?

If you’re affected by allergies during the warmer seasons, chances are the colder weather will not bring much relief.

The amount of pollen in the air in winter is significantly lower than during spring and summer. However, because people tend to spend a lot of time indoors during winter, with the doors and windows closed, they become more susceptible to indoor allergens.

Winter allergy symptoms are similar to those you experience in spring or summer. These may include:

  • Itchy nose and eyes
  • Sore throat
  • Coughing
  • Sneezing
  • Runny nose

You can treat allergies by taking antihistamines, but if the problem persists, you may want to consult an allergist. An allergist would be able to tell you exactly what you’re allergic to and how to solve the problem.

Allergens:

Mould

What is it? Mould is a fungus that tends to grow in warm, damp areas. Mould grows when its spores reproduce and spread.

The allergy: Mould spores can become airborne and come into contact with your body. This contact will then trigger allergy symptoms.

How to treat it? Regularly clean areas that tend to be damp and moist. Don’t allow objects that are likely to attract mould to stand around. Throw away old food before it turns mouldy.

Pet dander

What is it? Pets with feathers or fur are more likely to shed dander. Dander is tiny skin particles that your pet regularly sheds.

The allergy: Due to the cold weather, you would most likely spend more time indoors with your pets. This may lead to an accumulation of pet dander in your house, which may cause the onset of winter allergies.

How to treat it? Open windows so that dander can be carried out. Vacuum carpets regularly.

Dust mites

What is it? Dust mites are microscopic bugs that can be found in beds and couches.

The allergy: Dust mites may leave remains or droppings behind, which can cause winter allergies.

How to treat it? Regularly wash bedding and shake out couch cushions. Vacuuming regularly is also effective.

Fireplaces and heaters

What is it? Fireplaces and heaters are a great way to keep warm during winter but they bring on nasty allergies as well.

The allergy: Without proper ventilation, the smoke caused by fireplaces may aggravate your allergies. Heaters tend to heat up a room and remove moisture. This lack of moisture in the air dries up the nasal passages and aggravates already inflamed nasal passages.

How to treat it? Make sure that the room and fireplace are well ventilated before lighting a fire or switching on the heater.

 Image credit: iStock

Share Button

Health24.com | Man born without a penis gets bionic manhood – and will have erection for 10 days

A British man who was born without a penis is looking forward to having sex for the first time after having a bionic penis implant.

Andrew Wardle (44) was born with bladder exstrophy, a rare birth defect that means the bladder is formed on the outside of his body.

Although he has testicles, the one-in-20-million condition meant Wardle was born without a penis, reports the Metro: “I’ve spent 44 years without a penis and I’ve coped with not having sex for all that time. It will take me a while to get in the swing of things,” he told the UK publication. 

“I’m very aware that I am half-human half-robot at the moment. I’m like the bionic man. I will even be able to perform if I am drunk.”

A long journey 

The psychological scarring of living without a penis led Wardle to attemp suicide twice. In 2012 his general practitioner decided something needs to be done about the situation and referred him to Dr Dan Wood, a urologist at University College Hospital in London. 

In February 2015, Wardle had his first operation to remove his his urostomy bag – his urine had been diverted into a specially-converted stoma. A catheter now enables him to go to the bathroom. 

Then, in November 2015, Wardle had surgery to build a penis from the skin, muscles and nerves in his left arm and the vein in his right leg.

According to the Deccan Chronicle he has now successfully undergone the final stage of a £50 000 (more than R900 000) implant operation.

A pump has been fitted, which will give him an erection at the push of a button, but since the completion of the operation on 26 June 2018, he will have an erection for 10 days before it is deflated. 

The future

Wardle is adjusting well and is optimistic about the future.”I’m feeling good because they’ve given me painkillers but I’m sure I will feel a bit sore later on,” he told the Daily Mail. 

“I do feel different. I’m very aware there’s some robotics inside me but it feels a part of me now.”

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Lemurs can smell weakness in each other

Some people watch the competition carefully for the slightest signs of weakness. Lemurs, on the other hand, just give them a sniff.

These primates from Madagascar can tell that a fellow lemur is weaker just by the natural scents they leave behind, finds a study on ring-tailed lemurs led by Duke University researchers. Males act more aggressively toward scents that smell “off.”

“Our study shows that physical injury from peers dampens an animal’s scent signature, and in a way that its counterparts can detect,” said Duke professor of evolutionary anthropology Christine Drea.

The findings will appear online June 29 in the journal Scientific Reports.

Body odor is a big deal for ring-tailed lemurs. Males and females have potent scent glands on their genitals that secrete a foul-smelling substance. When they smear these smelly secretions on twigs and branches in their territory, they leave behind a signal made up of 200 to 300 different chemicals that tells other lemurs who was there and whether they are ready to mate.

The odor is “quite pungent and musky,” said Rachel Harris, who conducted the research as a postdoctoral associate in evolutionary anthropology at Duke. “It’s not something you’d want to get a big whiff of!”

The team used cotton swabs to collect scent secretions from ring-tailed lemurs at the Duke Lemur Center in Durham, North Carolina. Between 2007 and 2016, researchers swabbed 23 individuals while the animals were receiving veterinary treatment for wounds or other injuries, usually the same day they were hurt or shortly afterward.

In the wild and in captivity, lemurs fight to determine who’s in charge or who gets to mate, chasing and lunging at each other and biting, swatting or pulling out tufts of fur. Such scuffles are normal behaviors for lemurs and can leave them with cuts, bite marks and other wounds.

On one occasion, a male named Aracus got hurt in a skirmish with a younger rival over a female and cut his hand and cheek. In another case, a lemur named Herodotus hurt his big toe during a bad landing.

Tests with gas chromatography-mass spectrometry revealed that injury changed the chemical cocktail that makes up their scent. The number of compounds in the scent decreased by 10 percent while they were wounded.

The lemurs’ natural musk was particularly muted when they were injured during the mating season, when fights are more common, the researchers found.

“The breeding season is a period of heightened stress,” Drea said. Males that are injured during this time “can’t sustain their olfactory signals.” In other words, they can’t realize their natural fragrance’s full potential because scent signals are energetically costly and can’t easily be faked to fool rivals or potential mates, Drea said.

The patterns persisted even after accounting for changes in the lemurs’ odors caused by taking antibiotics while they recovered. Although the differences were too subtle for the human nose to pick up, other lemurs could sniff them out.

In behavioral tests, males paid more attention to wooden rods rubbed with scents collected from another male while it was injured than to rods with scents collected from the same individual when it wasn’t injured, sniffing and marking them more frequently and for longer periods.

The males marked over the injured animals’ odors using extra scent glands on the insides of their wrists to assert their dominance.

The researchers think the lemurs may be using scent to detect changes in their competitors’ fighting ability, and act more aggressive when they smell weakness.

“They respond more competitively when they could easily have the upper hand,” Drea said.

“These animals constantly monitor the physical condition of their competitors and respond quickly to any opportunity to climb the social ladder,” Harris said.

Story Source:

Materials provided by Duke University. Note: Content may be edited for style and length.

Share Button

Gosport hospital deaths: Nurses were ‘making patients comfortable’

More than 450 patients died after being prescribed painkillers at Gosport War Memorial Hospital.

Share Button

Administering hormones affects DNA

The public debate on endocrine disrupting chemicals (EDCs) — exogenous substances that have the same or similar effects as endogenous hormones — has been going on for some time. Chemicals such as bisphenol A or phthalates, the latter of which are used to soften plastics, may be connected to rising infertility rates among men and women.

In an experiment with pigs, researchers from ETH Zurich and the Technical University of Munich have demonstrated for the first time that the administration of even extremely low doses of an endocrine disruptor — in this case, an endogenous estrogen — leads to epigenetic changes in a pregnant sow’s DNA. Moreover, these changes were also observed in the sows’ embryos, and similar changes were even evident after the offspring had reached adulthood. The study was recently published in the journal Scientific Reports.

A time window of increased sensitivity

“EDCs, especially estrogens, are highly effective even at very low doses,” says Susanne Ulbrich, Full Professor of Animal Physiology at ETH Zurich. Whether endo- or exogenous chemicals have an effect, and how strong that effect is, also depends on the point in time during which the exposure occurs. “For example,” Ulbrich explains, “the body is particularly susceptible to external disruptive hormonal influences during the embryonic phase of early pregnancy.”

Ulbrich and her colleagues examined exactly such a time window in their study with pigs: to simulate the intake of EDCs via drinking water or food, they exposed pregnant sows to varying doses of estradiol-17β, a natural estrogen, via their daily feed either over the course of the whole gestation period or only during the first ten days after fertilisation.

The lowest dose corresponded to the acceptable daily intake for humans (0.05 micrograms per kilogram body weight). In the same experiment, the scientists administered two other dosages: one close to the “no observed effect” level (10 micrograms per kilogram body weight daily) as well as a higher dosage (1,000 micrograms per kilogram daily) — the latter to simulate the accidental taking of the contraceptive pill in early pregnancy. The experiment included a control group of pigs that received no estradiol.

The scientists tested the gene expression and the epigenetic changes in various tissues of the pregnant sows as well as in their offspring, both in the ten-day-old embryos (blastocysts) and in one-year-old mature females.

Changes in gene expression

Their efforts bore fruit: of the 57 estrogen-related genes, estradiol affected the tissue-specific expression of about two dozen of the genes tested, according to dosage. Most of these genes regulate the cell cycle or suppress the growth of tumours. The changes were most pronounced in the pregnant sows’ corpora lutea, endometria, hearts and skeletal muscle.

In addition, the researchers observed epigenetic changes in a few selected genes in the sows’ liver. Similar changes to these genes also appeared in the embryos and in the adult offspring: even in the one-year-old female offspring, the researchers were able to determine that the epigenetic pattern of these genes had been altered.

Epigenetic changes occur for example through the addition or removal of small chemical groups, such as methyl groups, at certain points in the DNA. This can alter the expression of the affected gene, and in turn change the cell’s function.

Lasting changes

“We didn’t find any serious impact on the health of the adult offspring; we saw only slight changes, such as in bone density and the ratio of fat to muscle mass,” Ulbrich explains. However, it remains unclear what long-term effects the epigenetic changes might have, and whether the interaction of the many EDCs humans are exposed to on a daily basis render the situation more acute.

“There is an urgent need to observe this phenomenon over several generations in a long-term study,” says the ETH professor. “Epigenetic changes can emerge within just one generation, but in certain circumstances they will continue to be transmitted to succeeding generations. We can already clearly demonstrate that hormones, even after a brief exposure period and in very small amounts, can have a measurable effect,” she concludes.

Based on these results, Ulbrich, an expert in reproductive physiology, is calling for a re-assessment of the acceptable daily intake value and the “no observed effect level” dosage. She notes that pigs’ hormonal changes during pregnancy closely resemble those in humans, so the results of the study are highly applicable to humans; they may even be more appropriate than findings from a study of, say, mice.

“At the moment, recommended threshold levels are probably too high,” Ulbrich says. No matter how tiny the estrogen dosage, the epigenetic changes she and her team observed clearly evidenced that the test subjects had been exposed to an EDC. She continues: “How exactly that resulted in the changes and what impact these changes will have in the long run requires closer study. The sensitivity of embryos in the early days of pregnancy should under no circumstances be underestimated.”

Share Button

Simple logic for nanofluidic computing simulated

Invigorating the idea of computers based on fluids instead of silicon, researchers at the National Institute of Standards and Technology (NIST) have shown how computational logic operations could be performed in a liquid medium by simulating the trapping of ions (charged atoms) in graphene (a sheet of carbon atoms) floating in saline solution. The scheme might also be used in applications such as water filtration, energy storage or sensor technology.

The idea of using a liquid medium for computing has been around for decades, and various approaches have been proposed. Among its potential advantages, this approach would require very little material and its soft components could conform to custom shapes in, for example, the human body.

NIST’s ion-based transistor and logic operations are simpler in concept than earlier proposals. The new simulations show that a special film immersed in liquid can act like a solid silicon-based semiconductor. For example, the material can act like a transistor, the switch that carries out digital logic operations in a computer. The film can be switched on and off by tuning voltage levels like those induced by salt concentrations in biological systems.

“Previous devices were much more elaborate and complex,” NIST theorist Alex Smolyanitsky said. “What this ion-trapping approach achieves is conceptual simplicity. In addition, the same exact device can act as both a transistor and a memory device — all you have to do is switch the input and output. This is a feature that comes directly from ion trapping.”

The NIST molecular dynamics simulations focused on a graphene sheet 5.5 by 6.4 nanometers (nm) in size and with one or more small holes lined with oxygen atoms. These pores resemble crown ethers — electrically neutral circular molecules known to trap metal ions. Graphene is a sheet of carbon atoms arranged in hexagons, similar in shape to chicken wire, that conducts electricity and might be used to build circuits. This hexagonal design would seem to lend itself to pores, and in fact, other researchers have recently created crown-like holes in graphene in the laboratory.

In the NIST simulations, the graphene was suspended in water containing potassium chloride, a salt that splits into potassium and sodium ions. The crown ether pores were designed to trap potassium ions, which have a positive charge. Simulations show that trapping a single potassium ion in each pore prevents any penetration of additional loose ions through the graphene, and that trapping and penetration activity can be tuned by applying different voltage levels across the membrane, creating logic operations with 0s and 1s (see text box below).

Ions trapped in the pores not only block additional ion penetration but also create an electrical barrier around the membrane. Just 1 nm away from the membrane, this electric field boosts the barrier, or energy needed for an ion to pass through, by 30 millivolts (mV) above that of the membrane itself.

Applying voltages of less than 150 mV across the membrane turns “off” any penetration. Essentially, at low voltages, the membrane is blocked by the trapped ions, while the process of loose ions knocking out the trapped ions is likely suppressed by the electrical barrier. Membrane penetration is switched on at voltages of 300 mV or more. As the voltage increases, the probability of losing trapped ions grows and knockout events become more common, encouraged by the weakening electrical barrier. In this way, the membrane acts like a semiconductor in transporting potassium ions.

To make actual devices, crown ether pores would need to be fabricated reliably in physical samples of graphene or other materials that are just a few atoms thick and conduct electricity. Other materials may offer attractive structures and functions. For example, transition metal dichalcogenides (a type of semiconductor) might be used because they are amenable to a range of pore structures and abilities to repel water.

Making A Logic Operation in Liquid

NIST simulations showed that ion trapping depends on the voltage across the porous graphene membrane, suggesting the possibility of performing simple ion-based logic operations. At sufficiently low salt concentration, the membrane’s highly conductive (on) regime coincides with low trapped ion occupancy, and vice versa. Direct electrical measurement of the membrane’s voltage, which might be used in an electrical circuit, is what’s known as a “read” operation.

If a low voltage, denoted 0, is applied across the membrane with appropriate salt concentration, the membrane is nearly nonconductive (off) and its pores are fully occupied by the trapped ions. Therefore, the charge in the graphene circuit, measured at the membrane, is relatively high, denoted as 1. Conversely, when high voltage (more than 300 mV), denoted 1, is applied, the membrane is highly conductive (on), fewer ions are trapped, and thus a low (0) state of energy in the membrane itself is measured.

The input-output relationship can be viewed as a NOT logic gate or operation, in which input and output values are reversed. If 0 goes in, then 1 comes out, and vice versa. With two graphene sheets an OR (XOR) logic operation would be possible. In this case, the output value, or the difference between the two membrane states, is 1 only when either of the two sheets is highly conductive. Stated another way, the output is 1 if the inputs are different but 0 if the two inputs are identical.

Even a small variation in applied voltage results in a relatively large change in potential membrane charge or current, suggesting that sensitive switching may be possible. Thus, voltage-tunable ion trapping in crown pores might be used to store information, and simple, yet sensitive ionic transistors might be used to perform sophisticated logic operations in nanofluidic computing devices.

The research is funded by the Materials Genome Initiative.

Share Button

The culprit of some GaN defects could be nitrogen

As silicon-based semiconductors reach their performance limits, gallium nitride (GaN) is becoming the next go-to material to advance light-emitting diode (LED) technologies, high-frequency transistors and photovoltaic devices. Holding GaN back, however, is its high numbers of defects.

This material degradation is due to dislocations — when atoms become displaced in the crystal lattice structure. When multiple dislocations simultaneously move from shear force, bonds along the lattice planes stretch and eventually break. As the atoms rearrange themselves to reform their bonds, some planes stay intact while others become permanently deformed, with only half planes in place. If the shear force is great enough, the dislocation will end up along the edge of the material.

Layering GaN on substrates of different materials makes the problem that much worse because the lattice structures typically don’t align. This is why expanding our understanding of how GaN defects form at the atomic level could improve the performance of the devices made using this material.

A team of researchers has taken a significant step toward this goal by examining and determining six core configurations of the GaN lattice. They presented their findings in the Journal of Applied Physics, from AIP Publishing.

“The goal is to identify, process and characterize these dislocations to fully understand the impact of defects in GaN so we can find specific ways to optimize this material,” said Joseph Kioseoglou, a researcher at the Aristotle University of Thessaloniki and an author of the paper.

There are also problems that are intrinsic to the properties of GaN that result in unwanted effects like color shifts in the emission of GaN-based LEDs. According to Kioseoglou, this could potentially could be addressed by exploiting different growth orientations.

The researchers used computational analysis via molecular dynamics and density functional theory simulations to determine the structural and electronic properties of a-type basal edge dislocations along the <1-100> direction in GaN. Dislocations along this direction are common in semipolar growth orientations.

The study was based on three models with different core configurations. The first consisted of three nitrogen (N) atoms and one gallium (Ga) atom for the Ga polarity; the second had four N atoms and two Ga atoms; the third contained two N atoms and two Ga core-associated atoms. Molecular dynamic calculations were performed using approximately 15,000 atoms for each configuration.

The researchers found that the N polarity configurations exhibited significantly more states in the bandgap compared to the Ga polarity ones, with the N polar configurations presenting smaller bandgap values.

“There is a connection between the smaller bandgap values and the great number of states inside them,” said Kioseoglou. “These findings potentially demonstrate the role of nitrogen as a major contributor to dislocation-related effects in GaN-based devices.”

Story Source:

Materials provided by American Institute of Physics. Note: Content may be edited for style and length.

Share Button