Health24.com | The 12 best foods to burn fat and build lean muscle

A killer body isn’t built on gym time alone. Of course you know nutrition matters, but what you might not know? Certain foods help you train harder, burn fat faster and sculpt muscle more easily. So stop panicking, toss that one-size-fits-all kaftan and stock up on these foods instead…

1. Spice things up

Start incorporating cinnamon, cayenne pepper and ginger into your daily recipes and you’ll reap the benefits. “They have a thermogenic effect, which increases energy expenditure and fat oxidation and reduces your body’s propensity to store fat by regulating insulin levels,” says nutritionist Matt Lovell. A teaspoon of cinnamon or 14g cayenne pepper is enough to rev up your system.

2. Go, go coco

Not only is coconut oil three times more effective than other oils at revving your metabolism, according to the Journal of Endocrinology, it also elevates muscle-strengthening growth hormones for four hours. Add a spoonful to your smoothie before you hit the gym and load those guns.

Read more: Exactly how to build lean muscle – without the bulk

3. Grain power

Innocuous-looking enough, but quinoa has a secret – it’s packed with a naturally occurring steroid called ecdysterone. Think steroids are just for meatheads? Think again. The more lean mass (read: muscle) you have, the more of a kilojoule-burning powerhouse you become – even when you’re just sitting around watching series. A diet high in both ecdysterone and protein can increase muscle mass by 7%. Pair your quinoa with chicken or lean red meat three times a week for a lean – but not bulky – physique.

4. Say cheese

Reacquaint yourself with cottage cheese. Not only is it a great low-fat, high-protein diet food, it’s also a rich source of calcium, which your muscles need a constant supply of to be able to contract (more cheese = more burpees). Yes, it will feel like you’re in ‘80s diet nirvana (put on some leg warmers to complete the picture), but a serving of this retro dairy product contains 1 833mg of tyrosine. Research carried out by the US Army showed that tyrosine can improve cognitive performance in stressful situations. You may not be going to war, but mountain climbers can be stressful, no?

Bowl of cottage cheese

5. Tune in to turmeric

“Turmeric is a wonder spice that helps burn fat and reduce muscle soreness, but it can also have beneficial effects on your mood,” says sports scientist Tim Lawson. A study in the Journal of Psychopharmacology, Nutrition and Metabolism revealed that the curcumin found in the spice revved alertness within 60 minutes, so you can hit that HIIT class in storming form.

Read more: 5 proven health and beauty benefits of turmeric

6. Get hot, not heavy

Capsaicin, the compound that gives chillies their kick, spikes metabolism, which can help you melt additional kilojoules. You can get it by eating raw, cooked, dried or powdered chillies. Add to soup, eggs and meat.

chilli, spice, heat, hot, peppers

7. Spoon a lotta ricotta

Booked into an evening kettlebell class? Eat a dollop of ricotta before you leave the office. The creamy cheese contains the amino acid glutamine, which can raise levels of human growth hormone (HGH) within 90 minutes, according to a study in the American Journal of Clinical Nutrition. This means that you’ll get more effective lean muscle gains from that class. In short – why, hello abs!

8. Peanut butter up

Yes, ol’ PB may have a drawback – it’s high in kilojoules – but it’s packed with heart-healthy monounsaturated fats and protein that can increase your body’s production of testosterone, which can help your muscles grow and melt fat. Practically speaking, it also works as a versatile snack when hunger strikes. Limit yourself to just a couple of tablespoons a day and look out for an all-natural and sugar-free variety.

Bowl of peanut butter

Read more: Can you eat peanut butter every day and still lose weight?

9. Celery for energy

There are 250mg of nitrates in 100g of celery. Nitrates widen your blood vessels, sending oxygen to your muscles, increasing time to exhaustion by 17%. Studies show you need to consume 300 to 500mg of nitrates pre-workout. Can’t stomach celery? There are more than 400mg of nitrates in 100g spinach, while 500ml beetroot juice boasts 500mg.

10. We scream for goats

Stressed? If you find yourself skipping the gym for a glass of nerve-calming wine far too often, start splashing goat’s milk into your smoothies. The amino acid tryptophan is an essential precursor for mood-boosting serotonin and goat’s milk boasts more of the stuff than the bovine alternative. It also helps you unwind if a workout has left you wired.

making a smoothie with milk

Read more: 5 reasons you’re gaining weight that have nothing to do with food

11. Olive it up

Kalamata olives are a top source of the polyphenol hydroxytyrosol, which helps convert fuel into energy, according to Lawson. Add 10 olives to your salad at lunch. It’ll also give you 2.7g monounsaturated fats to feed your evening workouts.

12. Three cheers for chia

Chia seeds are a weight-loss superhero. “High-fibre chia seeds up your satiety and slow carb absorption,” Lovell says. Ideal, since an excess of carbs (like that cheeky pizza, perhaps) is stored as fat. Whizz some with watermelon for a pre-gym smoothie. The seeds also help guard against dehydration, while watermelon has been shown to increase performance. Winning at life.

chia seeds and fruit

This article was originally published on www.womenshealthsa.co.za

Image credit: iStock 

NEXT ON HEALTH24X

Share Button

Health24.com | 5 period apps that make tracking your menstrual cycle a breeze

Periods can be quite a pain, literally. Sometimes your cycle is like clockwork, you know the moment when Aunt Flow is on the way. Other times you’re stressing because your period is late, which leads to you wondering what your body is up to.

That’s why we can be ever-grateful that we live in the modern age where apps do all the guesswork for us.

Here are five period trackers that will definitely make tracking your cycle way less complicated:

1. Period Calendar

Period Calendar tracks and predicts your period, ovulation and lets you know your chances of falling pregnant on a specific day. Among other things you can also track when you have sex, your moods, weight and discharge. It even has a setting to remind you to take your birth control, which will definitely stop pregnancy scare related stress!

Android: Free

iPhone: Free

Read more: 6 times your period blood looks different – and what it means about your health

2. Flo

As a loyal Flo user, I absolutely love this app. To date, it has accurately predicted my period and is a major help when it comes to tracking symptoms. On this app, you can track a variety of things, such as your weight (which fluctuates depending on your cycle), your physical activity – in and out the bedroom – and it will even remind you to stay hydrated. It also gives you daily insights depending on your cycle, so if you’re having cramps on a particular day, it will provide you with tips to help ease your pain. And if you’re pregnant, there’s a pregnancy mode which tracks your pregnancy and provides insightful articles.

Android: Free

iPhone: Free

3. Clue

This app was rated the top period tracking app by the journal Obstetrics & Gynecology in the US, so you know its good. Clue says that they use science to help you discover the unique patterns in your menstrual cycle. Like many period apps, you can log your menstrual flow and even the products that you use. Girly frills, not your thing? Clue promises no pink, flowers or euphemisms, just a sleek design for the everyday woman. Clue is great because the more you use it, the smarter and more accurate it gets.

Android: Free

iPhone: Free

Read more: These women wrote hilarious odes to their periods on Twitter

4. My Calendar

If you love looking at all things pink, then this app is exactly everything you want. You can track irregular periods, weight, temperature, moods, blood flow, symptoms and more. It comes with password protection so you can keep your info safe from peeping eyes. It also has an abstinence mode, which hides ovulation, fertility and sexual activity, making it perfect for those abstaining from sex or teens just starting their period. Not liking the way it looks? It’s totally customisable, so you are in total control of how it looks.

Android: Free

iPhone: Free

5. Eve

Eve is super savvy and perfect for tracking your period and sexual activity. It predicts your next period and your chances of falling pregnant on a particular day. It does the usual tracking of your daily habits and moods, and also offers insights regarding women’s health. You can take daily sex quizzes which will have you becoming a sexpert in no time. What makes Eve different from other period apps, is their community. You can chat with other women and share tips and tricks to beat PMS. You’ll also receive reliable information about sex and birth control, giving you total control over your period and sex life.

Android: Free

iPhone: Free

This article was originally published on www.womenshealthsa.co.za

Image credit: iStock

Share Button

Health24.com | Do you have low penis self-esteem?

If there’s one thing I’ve learnt about guys during my years as a sex writer, it’s that they’re desperate to feel okay about their junk – and with nicknames like that, it’s no wonder. This is true regardless of what a guy is packing, from micro-members to skyscraper schlongs.

In fact, I once interviewed Jonah Falcon, the man with the world’s biggest penis, and found him living a secluded “asexual” lifestyle that he called “depressing”. You see? The grass is not always greener… on the other side of the locker room.

Even men who aren’t worried about their size are often deeply concerned that their penises are ugly or weird, smelly or bad-tasting. Guys with foreskin sometimes feel like freaks; guys without it wonder if sex would be better with it.

Read more: The best sex positions for every penis size

Then there are the aesthetic anxieties about scars, curving, colouring, freckles, warts, moles and pubic hair. Testicles come with their own magnum-sized worries about sagging and unevenness.

This is all before sex even begins. Then you get your performance-related insecurities: “Is my penis hard enough?”, “Did I last long enough”, “Does my cum taste revolting?”

I have one thing to say about this rampant penis anxiety: You’re tripping so damn hard.

As a so-called sexpert, and a red-blooded heterosexual woman, I can tell you there is every reason to love your penis – and you’ll find some of the most important examples below.

Vaginas are only so big

We tend to apply bigger-is-better thinking to a man’s erection – but the average vagina is only 7 to 10cm deep. And the all-important G-spot is generally only 5 to 7cm inside. So you really don’t need to reach very far in to get to the important bit!

Read more: How to please a woman: Secrets from a man with a hot wife and a tiny penis

You have no idea what an average penis looks like!

If you insist on disregarding what I have to say about the relative unimportance of size, consider that you probably don’t have an accurate picture of what an average penis looks like anyway. Fortunately, science reveals the average penis size. How do you stack up?

Just think about it: If you’re straight, you typically only see other guys’ junk in porn and the locker room, right? Surely you already realise that X-rated stars do not have average-sized man parts. But here’s something you may not know about those seemingly gifted dudes who insist on letting their members air-dry at the gym: They might not be what they appear.

According to the Kinsey Institute, “In general, smaller flaccid penises lengthen at erection by a greater percentage than do larger flaccid penises, with most men reaching an average size of 12 to 17cm, so the flaccid size of a penis is not a good predictor of erect size.”

Penises smell great

Popular wisdom seems to be that penises are stinky. Sure, if you play a bunch of basketball and don’t shower for a week, it’s going to have a nasty funk. But if you exercise basic hygiene, it’s not a problem. (There are a few simple fixes you can do if your penis really does stink.) If anything, it might have the slight woody scent of a manly cologne. We women like manly cologne.

And taste good too

Again, if you shower like a civilised human, there just isn’t any bad taste to speak of. Unless you plan on having a couple ribs removed so that you can try it for yourself, you’ll just have to take my word for it.

You can pee anywhere, for crying out loud

Clearly this isn’t sexy-times related – unless golden showers are your thing – but, man, I have been waiting to get this off my chest. You men get to urinate anywhere you want. Just whip out that pee tunnel and you’re good to go. In the woods, on the side of the road, in the snow. You’ll never have to know the misery of squatting to pee.

Read more: This poll found out how important size really is to women

Foreskin is awesome

Lots of guys think foreskin looks funny. What they’re failing to see is the beauty of the mechanics of the thing, and the way a woman will appreciate being able to effortlessly glide her hand over the head.

So is no skin

A circumsised penis is like a present without the wrapping – it’s 100% immediate gratification. No woman will argue with that.

Read more: Is it better to have a circumcised penis?

Penises are ‘morning people’

Man, first thing every morning, without fail, your little guy pops right up out of bed like you never will. It’s inspiring, really. That dude has a real zest for life. In terms of role models for how to be in the world, it’s a toss up between the penis and the Dalai Lama.

Not getting the morning wood the way you used to? No problem. Here are eight ways to protect your erection.

Ejaculation is awesome

I guess I don’t have to try too hard to convince you of this. I don’t just mean the awesomeness of the associated ecstasy, though. It’s also the dramatic visual display of pleasure. Nature’s fireworks, man! It makes ladies’ jaws drop in awe – and, OK, I’ll admit, a bit of jealousy. Now, some women do ejaculate, but it’s much less common, and more difficult to achieve. So count your blessings, penis-owners.

Your wang is a beautiful thing

The delicate ridges and veins. The mind-bending smoothness, even when it’s hard. (I could write a 1 000-word ode to the beauty of the frenulum alone, you guys.) It all makes for a breathtaking sight – and any woman who’s any fun to have sex with will agree.

This article was originally published on www.menshealth.com

Image credit: iStock 

NEXT ON HEALTH24X

Share Button

New insight into why Pierce’s disease is so deadly to grapevines

Scientists are gaining a better understanding of Pierce’s disease and how it affects grapevines. The disease, which annually costs California more than $100 million, comes from a bacterium called Xylella fastidiosa. While the bacterium has been present in the state for more than 100 years, Pierce’s disease became a more serious threat to agriculture with the arrival of the glassy-winged sharpshooter insect, which can carry the bacterium from plant to plant.

In a new study, published in Frontiers in Plant Science, researchers at the University of California, Davis, have identified a set of molecular markers that influence the onset of Pierce’s disease in grapevines.

“We now have a very good idea of the plant responses to the disease,” said lead author Paulo Zaini, a postdoctoral researcher in the Department of Plant Sciences at UC Davis. “This will help us in early diagnosis and help us design strategies to protect the plant from damaging itself.”

HOW INFECTION DEVELOPS

The glassy-winged sharpshooter injects the Xylella fastidiosa bacterium into the plant’s xylem, which is the part of the plant that carries water. The disease causes leaves to yellow or “scorch,” eventually drying up and dropping from the vine. It can kill a plant in three to five years. Few diseases can kill grapevines so quickly.

The glassy-winged sharpshooter was first reported in California in 1994 and can travel greater distances than native sharpshooters. By 2002, the glassy-winged sharpshooter had infested more than 1,100 acres of grapevines statewide.

“What growers do to stop the bug is just apply insecticides at an increasingly growing rate,” said Zaini. “It’s not a sustainable strategy.”

In this study the authors looked at the plant’s responses to the disease compared to healthy plants. Better understanding the biochemical changes with onset of the disease can help foster new strategies to increase plant health, rather than having to use insecticides to fight disease.

Scientists have long thought the bacteria growing in the xylem blocked the flow of water to the leaves.

“We thought that the blockage causes a drought stress, but there’s much more to it than that.” said Abhaya Dandekar, professor of plant sciences and the study’s principal investigator. “Not all the vessels are blocked.”

The blockage might be part of the problem, but it doesn’t answer all the questions. More than 200 plant species harbor the bacterium but are asymptomatic.

Having identified molecular markers important for Pierce’s disease in grapevines, researchers can use them to study grapevine varieties or other plants that do not develop disease.

Story Source:

Materials provided by University of California – Davis. Note: Content may be edited for style and length.

Share Button

New system recovers fresh water from power plants

A new system devised by MIT engineers could provide a low-cost source of drinking water for parched cities around the world while also cutting power plant operating costs.

About 39 percent of all the fresh water withdrawn from rivers, lakes, and reservoirs in the U.S. is earmarked for the cooling needs of electric power plants that use fossil fuels or nuclear power, and much of that water ends up floating away in clouds of vapor. But the new MIT system could potentially save a substantial fraction of that lost water — and could even become a significant source of clean, safe drinking water for coastal cities where seawater is used to cool local power plants.

The principle behind the new concept is deceptively simple: When air that’s rich in fog is zapped with a beam of electrically charged particles, known as ions, water droplets become electrically charged and thus can be drawn toward a mesh of wires, similar to a window screen, placed in their path. The droplets then collect on that mesh, drain down into a collecting pan, and can be reused in the power plant or sent to a city’s water supply system.

The system, which is the basis for a startup company called Infinite Cooling that last month won MIT’s $100K Entrepreneurship Competition, is described in a paper published today in the journal Science Advances, co-authored by Maher Damak PhD ’17 and associate professor of mechanical engineering Kripa Varanasi. Damak and Varanasi are among the co-founders of the startup.

Varanasi’s vision was to develop highly efficient water recovery systems by capturing water droplets from both natural fog and plumes of industrial cooling towers. The project began as part of Damak’s doctoral thesis, which aimed to improve the efficiency of fog-harvesting systems that are used in many water-scarce coastal regions as a source of potable water. Those systems, which generally consist of some kind of plastic or metal mesh hung vertically in the path of fogbanks that regularly roll in from the sea, are extremely inefficient, capturing only about 1 to 3 percent of the water droplets that pass through them. Varanasi and Damak wondered if there was a way to make the mesh catch more of the droplets — and found a very simple and effective way of doing so.

The reason for the inefficiency of existing systems became apparent in the team’s detailed lab experiments: The problem is in the aerodynamics of the system. As a stream of air passes an obstacle, such as the wires in these mesh fog-catching screens, the airflow naturally deviates around the obstacle, much as air flowing around an airplane wing separates into streams that pass above and below the wing structure. These deviating airstreams carry droplets that were heading toward the wire off to the side, unless they were headed bang-on toward the wire’s center.

The result is that the fraction of droplets captured is far lower than the fraction of the collection area occupied by the wires, because droplets are being swept aside from wires that lie in front of them. Just making the wires bigger or the spaces in the mesh smaller tends to be counterproductive because it hampers the overall airflow, resulting in a net decrease in collection.

But when the incoming fog gets zapped first with an ion beam, the opposite effect happens. Not only do all of the droplets that are in the path of the wires land on them, even droplets that were aiming for the holes in the mesh get pulled toward the wires. This system can thus capture a much larger fraction of the droplets passing through. As such, it could dramatically improve the efficiency of fog-catching systems, and at a surprisingly low cost. The equipment is simple, and the amount of power required is minimal.

Next, the team focused on capturing water from the plumes of power plant cooling towers. There, the stream of water vapor is much more concentrated than any naturally occurring fog, and that makes the system even more efficient. And since capturing evaporated water is in itself a distillation process, the water captured is pure, even if the cooling water is salty or contaminated. At this point, Karim Khalil, another graduate student from Varanasi’s lab joined the team.

“It’s distilled water, which is of higher quality, that’s now just wasted,” says Varanasi. “That’s what we’re trying to capture.” The water could be piped to a city’s drinking water system, or used in processes that require pure water, such as in a power plant’s boilers, as opposed to being used in its cooling system where water quality doesn’t matter much.

A typical 600-megawatt power plant, Varanasi says, could capture 150 million gallons of water a year, representing a value of millions of dollars. This represents about 20 to 30 percent of the water lost from cooling towers. With further refinements, the system may be able to capture even more of the output, he says.

What’s more, since power plants are already in place along many arid coastlines, and many of them are cooled with seawater, this provides a very simple way to provide water desalination services at a tiny fraction of the cost of building a standalone desalination plant. Damak and Varanasi estimate that the installation cost of such a conversion would be about one-third that of a building a new desalination plant, and its operating costs would be about 1/50. The payback time for installing such a system would be about two years, Varanasi says, and it would have essentially no environmental footprint, adding nothing to that of the original plant.

“This can be a great solution to address the global water crisis,” Varanasi says. “It could offset the need for about 70 percent of new desalination plant installations in the next decade.”

In a series of dramatic proof-of-concept experiments, Damak, Khalil, and Varanasi demonstrated the concept by building a small lab version of a stack emitting a plume of water droplets, similar to those seen on actual power plant cooling towers, and placed their ion beam and mesh screen on it. In video of the experiment, a thick plume of fog droplets is seen rising from the device — and almost instantly disappears as soon as the system is switched on.

The team is currently building a full-scale test version of their system to be placed on the cooling tower of MIT’s Central Utility Plant, a natural-gas cogeneration power plant that provides most of the campus’ electricity, heating, and cooling. The setup is expected to be in place by the end of the summer and will undergo testing in the fall. The tests will include trying different variations of the mesh and its supporting structure, Damak says.

That should provide the needed evidence to enable power plant operators, who tend to be conservative in their technology choices, to adopt the system. Because power plants have decades-long operating lifetimes, their operators tend to “be very risk-averse” and want to know “has this been done somewhere else?” Varanasi says. The campus power plant tests will not only “de-risk” the technology, but will also help the MIT campus improve its water footprint, he says. “This can have a high impact on water use on campus.”

Share Button

In desert trials, next-generation water harvester delivers fresh water from air

Last October, a University of California, Berkeley, team headed down to the Arizona desert, plopped their newest prototype water harvester into the backyard of a tract home and started sucking water out of the air without any power other than sunlight.

The successful field test of their larger, next-generation harvester proved what the team had predicted earlier in 2017: that the water harvester can extract drinkable water every day/night cycle at very low humidity and at low cost, making it ideal for people living in arid, water-starved areas of the world.

“There is nothing like this,” said Omar Yaghi, who invented the technology underlying the harvester. “It operates at ambient temperature with ambient sunlight, and with no additional energy input you can collect water in the desert. This laboratory-to-desert journey allowed us to really turn water harvesting from an interesting phenomenon into a science.”

Yaghi, the James and Neeltje Tretter chair in chemistry at UC Berkeley and a faculty scientist at Lawrence Berkeley National Laboratory, and his team will report the results of the first field test of a water -collecting harvester in the June 8 issue of the journal Science Advances.

The trial in Scottsdale, where the relative humidity drops from a high of 40 percent at night to as low as 8 percent during the day, demonstrated that the harvester should be easy to scale up by simply adding more of the water absorber, a highly porous material called a metal-organic framework, or MOF. The researchers anticipate that with the current MOF (MOF-801), made from the expensive metal zirconium, they will ultimately be able to harvest about 200 milliliters (about 7 ounces) of water per kilogram (2.2 pounds) of MOF, or 3 ounces of water per pound.

But Yaghi also reports that he has created a new MOF based on aluminum, called MOF-303, that is at least 150 times cheaper and captures twice as much water in lab tests. This will enable a new generation of harvesters producing more than 400 ml (3 cups) of water per day from a kilogram of MOF, the equivalent of half a 12-ounce soda can per pound per day.

“There has been tremendous interest in commercializing this, and there are several startups already engaged in developing a commercial water-harvesting device,” Yaghi said. “The aluminum MOF is making this practical for water production, because it is cheap.”

Yaghi is also working with King Abdul Aziz City for Science and Technology in Riyadh, Saudi Arabia, and its president, Prince Dr. Turki Saud Mohammad Al Saud, on the technology as part of their joint research Center of Excellence for Nanomaterials and Clean Energy.

Super-absorbent MOFs

Yaghi is a pioneer in metal-organic frameworks, which are solids with so many internal channels and holes that a sugar-cube-size MOF might have an internal surface area the size of six football fields. This surface area easily absorbs gases or liquids but, just as important, quickly releases them when heated. Various types of MOFs are already being tested as a way to pack more gas into the tanks of hydrogen-fueled vehicles, absorb carbon dioxide from smokestacks and store methane.

Several years ago, Yaghi created MOF-801, which absorbs and releases water easily, and last year he tested small quantities in a simple harvester to see if he could capture water from ambient air overnight and use the heat of the sun to drive it out again for use. That harvester, built by a collaborator at MIT using less than 2 grams of MOF, proved that the concept worked: the windows fogged up in the sun, though the researchers were not able to collect or accurately measure the water.

That same harvester was transported to the desert earlier this year and worked similarly, though again only droplets of water were generated as a proof of concept.

For the new paper, the UC Berkeley team — graduate student Eugene Kapustin and postdoctoral fellows Markus Kalmutzki and Farhad Fathieh — collected and measured the water and tested the latest generation harvester under varying conditions of humidity, temperature and solar intensity.

The harvester is essentially a box within a box. The inner box holds a 2-square-foot bed of MOF grains open to the air to absorb moisture. This is encased in a two-foot plastic cube with transparent top and sides. The top was left open at night to let air flow in and contact the MOF, but was replaced during the day so the box could heat up like a greenhouse to drive water back out of the MOF. The released water condensed on the inside of the outer box and fell to the bottom, where the researchers collected it with a pipette.

The extensive field tests lay out a blueprint allowing engineers to configure the harvester for the differing conditions in Arizona, the Mediterranean or anywhere else, given a specific MOF.

“The key development here is that it operates at low humidity, because that is what it is in arid regions of the world,” Yaghi said. In these conditions, the harvester collects water even at sub-zero dew points.

Yaghi is eagerly awaiting the next field test, which will test the aluminum-based MOF and is planned for Death Valley in late summer, where temperatures reach 110 degrees Fahrenheit in the daytime and remain in the 70s at night, with nighttime humidity as low as 25 percent.

Share Button

Silicon provides means to control quantum bits for faster algorithms

Quantum bits are now easier to manipulate for devices in quantum computing, thanks to enhanced spin-orbit interaction in silicon.

A silicon quantum computer chip has the potential to hold millions of quantum bits, or qubits, for much faster information processing than with the bits of today’s computers. This translates to high-speed database searches, better cybersecurity and highly efficient simulation of materials and chemical processes.

Now, research groups from Purdue University, the Technological University of Delft, Netherlands and the University of Wisconsin-Madison have discovered that silicon has unique spin-orbit interactions that can enable the manipulation of qubits using electric fields, without the need for any artificial agents.

“Qubits encoded in the spins of electrons are especially long-lived in silicon, but they are difficult to control by electric fields. Spin-orbit interaction is an important knob for the design of qubits that was thought to be small in this material, traditionally,” said Rajib Rahman, research assistant professor in Purdue’s School of Electrical and Computer Engineering.

The strength of spin-orbit interaction, which is the interaction of an electron’s spin with its motion, is an important factor for the quality of a qubit. The researchers found more prominent spin-orbit interaction than usual at the surface of silicon where qubits are located in the form of so-called quantum dots — electrons confined in three dimensions. Rahman’s lab identified that this spin-orbit interaction is anisotropic in nature — meaning that it is dependent on the angle of an external magnetic field — and strongly affected by atomic details of the surface.

“This anisotropy can be employed to either enhance or minimize the strength of the spin-orbit interaction,” said Rifat Ferdous, lead author of this work and a Purdue graduate research assistant in electrical and computer engineering. Spin-orbit interaction then affects qubits.

“If there is a strong spin-orbit interaction, the qubit’s lifetime is shorter but you can manipulate it more easily. The opposite happens with a weak spin-orbit interaction: The qubit’s lifetime is longer, but manipulation is more difficult,” Rahman said.

The researchers published their findings on June 5 in Nature Partner Journals — Quantum Information. The Wisconsin-Madison team fabricated the silicon device, the Delft team performed the experiments and the Purdue team led the theoretical investigation of the experimental observations. This work is supported by the Army Research Office, U.S. Department of Energy, the National Science Foundation and the European Research Council.

Upcoming work in Rahman’s lab will focus on taking advantage of the anisotropic nature of spin-orbit interactions to further enhance the coherence and control of qubits, and, therefore, the scaling up of quantum computer chips.

Story Source:

Materials provided by Purdue University. Note: Content may be edited for style and length.

Share Button

Ten thousand bursting genes

A breakthrough new technique enables scientists to image 10,421 genes at once within individual cells.

The work was done in the laboratory of Long Cai, research professor in biology and an affiliated faculty member of the Tianqiao and Chrissy Chen Institute for Neuroscience at Caltech. A paper describing the research appears in the June 7 issue of the journal Cell.

The new technique, dubbed intron seqFISH (sequential fluorescence in situ hybridization), is a major advance in being able to identify what goes on across the genome in hundreds of different cells at once. Previously, researchers could only image four to five genes at a time in cells with microscopy. This work builds off of previous advances from the Cai laboratory, including an earlier version of seqFISH from 2014 and research from 2017 that profiled over 10,000 genes under a microscope. Scaling seqFISH up to a genomic level now enables the imaging of over 10,000 genes — about half of the total number of genes in mammals — within single cells.

In order for genetic instructions to be turned into an actual functioning protein, a process called transcription must first occur. This process often occurs in pulses, or “bursts.” First, a gene will be read and copied into a precursor messenger RNA, or pre-mRNA, like jotting a quick, rough draft. This molecule then matures into a messenger RNA, or mRNA, akin to editing the rough draft. During the “editing” process, certain regions called introns are cut out of the pre-mRNA.

The team chose to focus on labeling introns because they are produced so early in the transcription process, giving a picture of what a cell is doing at the precise moment of gene expression.

Using the newly developed intron seqFISH technique, each intron is labeled with a unique fluorescent barcode, enabling it to be seen with a microscope. Seeing introns reveals which genes are currently turned on in individual cells, how strongly they are expressed, and where they are located. 10,421 introns — and therefore 10,421 genes — can be imaged at once.

Previous work that developed the barcoding technique focused on labeling mRNA itself, providing a measurement of how gene expression changed over several hours as the mRNA developed. Looking at introns enabled the researchers to examine, for the first time, so-called nascent transcriptomes — newly synthesized gene expression. This led them to discover that the transcription of genes oscillates globally across many genes on what Cai calls a “surprisingly short” timescale — only about two hours — compared to the time it takes for a cell to divide and replicate itself, which takes from 12 to 24 hours. This means that over the course of a two-hour period, many genes within a cell will burst on and off.

There are several reasons why the oscillation phenomenon had not been observed previously. First, because these two-hour oscillations are not synchronized amongst different cells, the fluctuations are averaged out by methods that require many cells. Second, the high accuracy of the seqFISH method allows the researchers to be certain that what they observe represents real biological fluctuations, rather than technical noise. Lastly, these two-hour oscillations are obscured when mRNAs rather than introns are measured, because mRNA molecules have a longer lifetime, three to four hours, in mammalian cells.

Additionally, because introns stay where the gene is physically located, fluorescently imaging introns allows researchers to visualize where genes are located within the chromosome, the large structure that DNA folds into within the cell’s nucleus. In this work, the team was surprised to discover that most active, protein-encoding genes are located on the surface of the chromosome, not buried inside of it.

“This technique can be applied to any tissue,” says Cai, who is a collaborator on the Human Cell Atlas, a project that aims to define all cell types in the human body. “Intron seqFISH can help identify cell types and also what the cells are going to do, in addition to giving us a look at the chromosome structure in the same cells.”

Share Button

The cartography of the nucleus

Nestled deep in each of your cells is what seems like a magic trick: Six feet of DNA is packaged into a tiny space 50 times smaller than the width of a human hair. Like a long, thin string of genetic spaghetti, this DNA blueprint for your whole body is folded, twisted, and compacted to fit into the nucleus of each cell.

Now, Caltech researchers have shown how cells organize the seemingly immense genome in a clever manner so that they can conveniently find and access important genes. Understanding the delicate three-dimensional organization of the genome is crucial, particularly because alterations in DNA structure have been linked to certain diseases such as cancer and early aging. Mapping and pinpointing alterations in nuclear structure may help in finding solutions to these diseases.

The work was done in the laboratory of Mitchell Guttman, assistant professor of biology and Heritage Medical Research Institute investigator. A paper describing the research appears in the June 7 online issue of the journal Cell.

Though the vast majority of cells in every human body contain identical genomes, different types of cells are able to have diverse functions because genes can be expressed at varying levels — in other words, they can be turned on or off. For example, when a stem cell is developing into a neuron, a flurry of activity happens in the nucleus to dial up and down levels of gene expression. These levels would be different, for example, if the stem cell was turning into a muscle cell or if the cell were making the decision to self-destruct.

In addition to the genome, the nucleus also contains structures called nuclear bodies, which are like miniature factories in the nucleus that contain a high concentration of cellular machinery all working to accomplish similar tasks, such as turning on specific sets of genes or modifying RNA molecules to produce proteins in the cell. This cellular machinery needs to be able to efficiently search through six feet of DNA — approximately 20,000 total genes, in mammals — in order to precisely find and control its targets. This is made possible because DNA is organized into three-dimensional structures that make certain genes more or less accessible.

In the new research, Guttman and his team describe a method to three-dimensionally map out how DNA is organized within the space of the nucleus and how regions of chromosomes interact with each other and with nuclear bodies. The technique, dubbed SPRITE (Split-Pool Recognition of Interactions by Tag Extension), allows researchers to examine clusters (or “complexes”) of molecules within the nucleus to see which molecules are interacting with each other and where they are located.

In the technique, each complex in the nucleus is given a different molecular barcode, with all of the molecules within a single complex receiving the same barcode. Then, the complexes can be broken open and the molecules analyzed. This way, scientists can determine if two or more molecules were interacting, depending on whether they had the same barcode.

Led by graduate student Sofia Quinodoz, the team used SPRITE to discover that genes across different chromosomes (large folded structures of DNA) cluster together around specific nuclear bodies. Specifically, inactive genes — those that are turned off — across different chromosomes cluster together around a particular nuclear body called the nucleolus, which contains repressive proteins on DNA that keep genes turned off. Conversely, active genes grouped about another kind of nuclear body called the nuclear speckle, contain molecules that help turn the genes on and make them into proteins.

“With SPRITE, we were able to see thousands of molecules — DNAs and RNAs — coming together at various ‘hubs’ around the nucleus in single cells,” says Quinodoz, the study’s first author. “Previously, researchers theorized that each chromosome is kind of on its own, occupying its own ‘territory’ in the nucleus. But now we see that multiple genes on different chromosomes are clustering together around these bodies of cellular machinery. We think these ‘hubs’ may help the cell keep DNA that are all turned on or turned off neatly organized in different parts of the nucleus to allow cellular machinery to easily access specific genes within the nucleus.”

Story Source:

Materials provided by California Institute of Technology. Note: Content may be edited for style and length.

Share Button

Remarkable skill of ancient Peru’s cranial surgeons

Even with a highly skilled neurosurgeon, the most effective anesthesia, and all the other advances of modern medicine, most of us would cringe at the thought of undergoing cranial surgery today.

After all, who needs a hole in the head? Yet for thousands of years, trepanation — the act of scraping, cutting, or drilling an opening into the cranium — was practiced around the world, primarily to treat head trauma, but possibly to quell headaches, seizures and mental illnesses, or even to expel perceived demons.

But, according to a new study led by the University of Miami Miller School of Medicine’s David S. Kushner, M.D., clinical professor of physical medicine and rehabilitation, trepanation was so expertly practiced in ancient Peru that the survival rate for the procedure during the Incan Empire was about twice that of the American Civil War — when, more three centuries later, soldiers were trepanned presumably by better trained, educated and equipped surgeons.

“There are still many unknowns about the procedure and the individuals on whom trepanation was performed, but the outcomes during the Civil War were dismal compared to Incan times,” said Kushner, a neurologist who has helped scores of patients recover from modern-day traumatic brain injuries and cranial surgeries. “In Incan times, the mortality rate was between 17 and 25 percent, and during the Civil War, it was between 46 and 56 percent. That’s a big difference. The question is how did the ancient Peruvian surgeons have outcomes that far surpassed those of surgeons during the American Civil War?”

In their study published in the June issue of World Neurosurgery, “Trepanation Procedures/Outcomes: Comparison of Prehistoric Peru with Other Ancient, Medieval, and American Civil War Cranial Surgery,” Kushner and his co-authors — biological anthropologists John W. Verano, a world authority on Peruvian trepanation at Tulane University, and his former graduate student, Anne R. Titelbaum, now of the University of Arizona College of Medicine — can only speculate on the answer.

But hygiene, or more accurately the lack of it during the Civil War, may have contributed to the higher mortality rates in the later time period. According to the study, which relied on Verano’s extensive field research on trepanation over a nearly 2,000-year period in Peru and a review of the scientific literature about trepanation around the world, Civil War surgeons often used unsterilized medical tools and their bare fingers to probe open cranial wounds or break up blood clots.

“If there was an opening in the skull they would poke a finger into the wound and feel around, exploring for clots and bone fragments,” Kushner said, adding that nearly every Civil War soldier with a gunshot wound subsequently suffered from infection. “We do not know how the ancient Peruvians prevented infection, but it seems that they did a good job of it. Neither do we know what they used as anesthesia, but since there were so many (cranial surgeries) they must have used something — possibly coca leaves. Maybe there was something else, maybe a fermented beverage. There are no written records, so we just don’t know.”

Whatever their methods, ancient Peruvians had plenty of practice. More than 800 prehistoric skulls with evidence of trepanation — at least one but as many as seven telltale holes — have been found in the coastal regions and the Andean highlands of Peru, the earliest dating back to about 400 B.C. That’s more than the combined total number of prehistoric trepanned skulls found in the rest of the world. Which is why Verano devoted an entire book, Holes in the Head — The Art and Archeology of Trepanation in Ancient Peru, to the 800-plus skulls, most of which were collected from burial caves and archaeological digs in the late 1800s and early 1900s and reside in museums and private collections today.

It’s also why Kushner, a medical history buff and Tulane alumnus, jumped at the chance to join Titelbaum in co-authoring one of the book’s chapters, “Trepanation from the Perspective of Modern Neurosurgery,” and continues to research the subject.

Published in 2016, the book analyzes the techniques and survival rates of trepanation in Peru through the demise of the Incan Empire in the early 1500s. The researchers gauged survival by classifying the extent of bone remodeling around the trepanned holes, which indicates healing. If there was no evidence of healing the researchers assumed the patient died during or within days of the surgery. If the margins of the trepanation openings showed extensive remodeling, they considered the operation successful and the patient long-lived.

Those classifications, Kushner, Verano and Titelbaum reported in the World Neurosurgery paper, show how ancient Peruvians significantly refined their trepanation techniques over the centuries. They learned, for example, not to perforate the protective membrane surrounding the brain — a guideline Hippocrates codified in ancient Greece at about the same time, 5th century, B.C., that trepanning is thought to have begun in ancient Peru.

The long-term survival rates from such “shallow surgeries” in Peru during those early years, from about 400 to 200 B.C., proved to be worse than those in the Civil War, when about half the patients died. But, from 1000 to 1400 A.D., survival rates improved dramatically, to as high as 91 percent in some samples, to an average of 75 to 83 percent during the Incan period, the study showed.

“Over time, from the earliest to the latest, they learned which techniques were better, and less likely to perforate the dura,” said Kushner, who has written extensively about modern-day neurosurgical outcomes. “They seemed to understand head anatomy and purposefully avoided the areas where there would be more bleeding. They also realized that larger-sized trepanations were less likely to be as successful as smaller ones. Physical evidence definitely shows that these ancient surgeons refined the procedure over time. Their success is truly remarkable.”

Almost as remarkable is how, by the end of World War I, cranial surgery evolved into the distinct profession of neurosurgery, which continues to improve our understanding of brain anatomy, physiology and pathology. As Kushner notes, today’s neurosurgeons regularly cut into the brain to remove tumors and blood clots, reduce intracranial pressure from massive strokes and trauma, repair vascular and structural anomalies and treat a myriad of other complex problems — with great success.

“Today, neurosurgical mortality rates are very, very low; there is always a risk but the likelihood of a good outcome is very high,” he said. “And just like in ancient Peru, we continue to advance our neurosurgical techniques, our skills, our tools, and our knowledge.”

Share Button