Turning up the heat on thermoelectrics

Imagine being able to power your car partly from the heat that its engine gives off. Or what if you could get a portion of your home’s electricity from the heat that a power plant emits? Such energy-efficient scenarios may one day be possible with improvements in thermoelectric materials — which spontaneously produce electricity when one side of the material is heated.

Over the last 60 years or so, scientists have studied a number of materials to characterize their thermoelectric potential, or the efficiency with which they convert heat to power. But to date, most of these materials have yielded efficiencies that are too low for any widespread practical use.

MIT physicists have now found a way to significantly boost thermoelectricity’s potential, with a theoretical method that they report today in Science Advances. The material they model with this method is five times more efficient, and could potentially generate twice the amount of energy, as the best thermoelectric materials that exist today.

“If everything works out to our wildest dreams, then suddenly, a lot of things that right now are too inefficient to do will become more efficient,” says lead author Brian Skinner, a postdoc in MIT’s Research Laboratory of Electronics. “You might see in people’s cars little thermoelectric recoverers that take that waste heat your car engine is putting off, and use it to recharge the battery. Or these devices may be put around power plants so that heat that was formerly wasted by your nuclear reactor or coal power plant now gets recovered and put into the electric grid.”

Skinner’s co-author on the paper is Liang Fu, the Sarah W. Biedenharn Career Development Associate Professor of Physics at MIT.

Finding holes in a theory

A material’s ability to produce energy from heat is based on the behavior of its electrons in the presence of a temperature difference. When one side of a thermoelectric material is heated, it can energize electrons to leap away from the hot side and accumulate on the cold side. The resulting buildup of electrons can create a measurable voltage.

Materials that have so far been explored have generated very little thermoelectric power, in part because electrons are relatively difficult to thermally energize. In most materials, electrons exist in specific bands, or energy ranges. Each band is separated by a gap — a small range of energies in which electrons cannot exist. Energizing electrons enough to cross a band gap and physically migrate across a material has been extremely challenging.

Skinner and Fu decided to look at the thermoelectric potential of a family of materials known as topological semimetals. In contrast to most other solid materials such as semiconductors and insulators, topological semimetals are unique in that they have zero band gaps — an energy configuration that enables electrons to easily jump to higher energy bands when heated.

Scientists had assumed that topological semimetals, a relatively new type of material that is largely synthesized in the lab, would not generate much thermoelectric power. When the material is heated on one side, electrons are energized, and do accumulate on the other end. But as these negatively charged electrons jump to higher energy bands, they leave behind what’s known as “holes” — particles of positive charge that also pile up on the material’s cold side, canceling out the electrons’ effect and producing very little energy in the end.

But the team wasn’t quite ready to discount this material. In an unrelated bit of research, Skinner had noticed a curious effect in semiconductors that are exposed to a strong magnetic field. Under such conditions, the magnetic field can affect the motion of electrons, bending their trajectory. Skinner and Fu wondered: What kind of effect might a magnetic field have in topological semimetals?

They consulted the literature and found that a team from Princeton University, in attempting to fully characterize a type of topological material known as lead tin selenide, had also measured its thermoelectric properties under a magnetic field in 2013. Among their many observations of the material, the researchers had reported seeing an increase in thermoelectric generation, under a very high magnetic field of 35 tesla (most MRI machines, for comparison, operate around 2 to 3 tesla).

Skinner and Fu used properties of the material from the Princeton study to theoretically model the material’s thermoelectric performance under a range of temperature and magnetic field conditions.

“We eventually figured out that under a strong magnetic field, a funny thing happens, where you could make electrons and holes move in opposite directions,” Skinner says. “Electrons go toward the cold side, and holes toward the hot side. They work together and, in principle, you could get a bigger and bigger voltage out of the same material just by making the magnetic field stronger.”

Tesla power

In their theoretical modeling, the group calculated lead tin selenide’s ZT, or figure of merit, a quantity that tells you how close your material is to the theoretical limit for generating power from heat. The most efficient materials that have been reported so far have a ZT of about 2. Skinner and Fu found that, under a strong magnetic field of about 30 tesla, lead tin selenide can have a ZT of about 10 — five times more efficient than the best-performing thermoelectrics.

“It’s way off scale,” Skinner says. “When we first stumbled on this idea, it seemed a little too dramatic. It took a few days to convince myself that it all adds up.”

They calculate that a material with a ZT equal to 10, if heated at room temperature to about 500 kelvins, or 440 degrees Fahrenheit, under a 30-tesla magnetic field, should be able to turn 18 percent of that heat to electricity, compared to materials with a ZT equal to 2, which would only be able to convert 8 percent of that heat to energy.

The group acknowledges that, to achieve such high efficiencies, currently available topological semimetals would have to be heated under an extremely high magnetic field that could only be produced by a handful of facilities in the world. For these materials to be practical for use in power plants or automobiles, they should operate in the range of 1 to 2 tesla.

Fu says this should be doable if a topological semimetal were extremely clean, meaning that there are very few impurities in the material that would get in the way of electrons’ flow.

“To make materials very clean is very challenging, but people have dedicated a lot of effort to high-quality growth of these materials,” Fu says.

He adds that lead tin selenide, the material they focused on in their study, is not the cleanest topological semimetal that scientists have synthesized. In other words, there may be other, cleaner materials that may generate the same amount of thermal power with a much smaller magnetic field.

“We can see that this material is a good thermoelectric material, but there should be better ones,” Fu says. “One approach is to take the best [topological semimetal] we have now, and apply a magnetic field of 3 tesla. It may not increase efficiency by a factor of 2, but maybe 20 or 50 percent, which is already a pretty big advance.”

The team has filed a patent for their new thermolelectric approach and is collaborating with Princeton researchers to experimentally test the theory.

Share Button

OLEDs become brighter and more durable

Organic light-emitting diodes (OLEDs) truly have matured enough to allow for first commercial products in form of small and large displays. In order to compete in further markets and even open new possibilities (automotive lighting, head-mounted-displays, micro displays, etc.), OLEDs need to see further improvements in device lifetime while operating at their best possible efficiency. Currently, intrinsic performance progress is solely driven by material development.

Now researchers from the Universitat Autònoma de Barcelona and Technische Universität Dresden demonstrate the possibility of using ultrastable film formation to improve the performance of state-of-the-art OLEDs. In their joint paper published in Science Advances with the title ‘High-performance organic light-emitting diodes comprising ultrastable glass layers’, the researchers show in a detailed study significant increases of efficiency and operational stability (> 15% for both parameters and all cases, significantly higher for individual samples) are achieved for four different phosphorescent emitters. To achieve these results, the emission layers of the respective OLEDs were grown as ultrastable glasses — a growth condition that allows for thermodynamically most stable amorphous solids.

This finding is significant, because it is an optimization which does neither involve a change of materials used nor changes to the device architecture. Both are the typical levers for improvements in the field of OLEDs. This concept can universally be explored in every given specific OLED stack, which will be equally appreciated by leading industry. This in particular includes thermally activated delayed fluorescence (TADF) OLEDs, which see a tremendous research and development interest at the moment. Furthermore, the improvements that, as shown by the researchers, can be tracked back to differences on the exciton dynamics on the nanoscale suggest that also other fundamental properties of organic semiconductors (e.g. transport, charge separation, energy transfer) can be equally affected.

Story Source:

Materials provided by Universitat Autonoma de Barcelona. Note: Content may be edited for style and length.

Share Button

Phosphorus nutrition can hasten plant and microbe growth in arid, high elevation sites

Glacial retreat in cold, high-altitude ecosystems exposes environments that are extremely sensitive to phosphorus input, new University of Colorado Boulder-led research shows. The finding upends previous ecological assumptions, helps scientists understand plant and microbe responses to climate change and could expand scientists’ understanding of the limits to life on Earth.

The study, which was recently published in the journal Science Advances, found that even in mountainous terrain above 17,000 feet above sea level, where soils freeze every night of the year, the addition of phosphorus resulted in rapid growth of plants and photosynthetic microbes, allowing them to overcome the chilly, arid climate.

“Life is more resourceful than we might have previously suspected,” said Steven Schmidt, a professor in CU Boulder’s Department of Ecology and Evolutionary Biology (EBIO) and a co-author of the research. “Phosphorus allows microbes to react quickly and grow in these sites.”

Nitrogen and phosphorus are both essential nutrients for vegetation and microbes, but plants are slower to re-grow in dry, high-elevation sites than in wet, temperate areas. Based on classical experiments, researchers had suspected that this sluggish regeneration was primarily due to the harsh climate and the relative lack of the nitrogen, limiting the potential for organic life.

“The thought has always been that nitrogen is most important to these newly-uncovered soils,” said John Darcy, a post-doctoral researcher at the University of Hawaii who co-authored the study while at CU Boulder. “But previous research has been concentrated in coastal and island landscapes. No one had looked at these cold, dry high-altitude systems before.”

Researchers from CU Boulder, Duke University, the University of Montana and the University of Minnesota drew upon six years’ worth of field data from arid sites in the central Alaska Range and the Andes Mountains of southern Peru. Both areas have experienced significant glacial retreat in recent decades due to climate change.

Post-glacial landscapes have been observed to remain largely un-vegetated for up to 150 years, leaving behind expanses of potentially unstable lakes and land that could result in floods, mudslides and potential water shortages.

The previously unappreciated importance of phosphorus for vegetation and microbes adds new context to long-held ecological theories and could inform future astrobiology studies as well as further research into agricultural runoff pollution.

“We’re expanding the boundaries of what we know about the limits to life on Earth,” Schmidt said.

Additional study co-authors include Joey Knelman of CU Boulder’s Institute for Arctic and Alpine Research (INSTAAR); Cory Cleveland of the University of Montana; Sarah Castle of the University of Minnesota; and Diana Nemergut of Duke University. The National Science Foundation and the National Geographic Society provided funding for the research.

Story Source:

Materials provided by University of Colorado at Boulder. Note: Content may be edited for style and length.

Share Button

Lung-on-a-chip simulates pulmonary fibrosis

Developing new medicines to treat pulmonary fibrosis, one of the most common and serious forms of lung disease, is not easy.

One reason: it’s difficult to mimic how the disease damages and scars lung tissue over time, often forcing scientists to employ a hodgepodge of time-consuming and costly techniques to assess the effectiveness of potential treatments.

Now, new biotechnology reported in the journal Nature Communications could streamline the drug-testing process.

The innovation relies on the same technology used to print electronic chips, photolithography. Only instead of semiconducting materials, researchers placed upon the chip arrays of thin, pliable lab-grown lung tissues — in other words, its lung-on-a-chip technology.

“Obviously it’s not an entire lung, but the technology can mimic the damaging effects of lung fibrosis. Ultimately, it could change how we test new drugs, making the process quicker and less expensive,” says lead author Ruogang Zhao, PhD, assistant professor in the Department of Biomedical Engineering at the University at Buffalo.

The department is a multidisciplinary unit formed by UB’s School of Engineering and Applied Sciences and the Jacobs School of Medicine and Biomedical Sciences at UB.

With limited tools for fibrosis study, scientists have struggled to develop medicine to treat the disease. To date, there are only two drugs — pirfenidone and nintedanib — approved by the U.S. Food and Drug Administrations that help slow its progress.

However, both drugs treat only one type of lung fibrosis: idiopathic pulmonary fibrosis. There are more than 200 types of lung fibrosis, according to the American Lung Association, and fibrosis also can affect other vital organs, such as the heart, liver and kidney.

Furthermore, the existing tools do not simulate the progression of lung fibrosis over time — a drawback that has made the development of medicine challenging and relatively expensive. Zhao’s research team, which included past and present students, as well as a University of

Toronto collaborator, created the lung-on-a-chip technology to help address these issues.

Using microlithography, the researchers printed tiny, flexible pillars made of a silicon-based organic polymer. They then placed the tissue, which acts like alveoli (the tiny air sacs in the lungs that allow us to consume oxygen), on top of the pillars.

Researchers induced fibrosis by introducing a protein that causes healthy lung cells to become diseased, leading to the contraction and stiffening of the engineered lung tissue. This mimics the scarring of the lung alveolar tissue in people who suffer from the disease.

The tissue contraction causes the flexible pillars to bend, allowing researchers to calculate the tissue contraction force based on simple mechanical principles.

Researchers tested the system’s effectiveness with pirfenidone and nintedanib. While each drug works differently, the system showed the positive results for both, suggesting the lung-on-a-chip technology could be used to test a variety of potential treatments for lung fibrosis.

The research was supported by the National Institutes of Health; the UB School of Engineering and Applied Sciences; the Jacobs School of Medicine and Biomedical Sciences at UB; and the Clinical and Translational Science Institute at UB.

Story Source:

Materials provided by University at Buffalo. Original written by Cory Nealon. Note: Content may be edited for style and length.

Share Button

Health24.com | Can you masturbate too much?

Whether it’s twice a week or twice a day, you’ve probably developed a pretty consistent masturbation routine by now. But at one point or another, you may have wondered if you’re masturbating too often.

The good news? There’s no magic number when it comes to a healthy solo sex life, says Dan Drake, MFT, LPCC, a certified sex addiction therapist and clinical counsellor.

In fact, there’s a pretty wide range: While 27% of 30- to 39-year-old men masturbate once a week to a few times a month, that number varies quite a bit by age, according to a 2009 survey of 2 500 American men.

Read more: How masturbating, breathing, and 23 other stupidly simple habits can make you the healthiest you’ve ever been

“However often you masturbate, it’s not a problem until it starts affecting your life in negative ways,” Drake explains.

But that doesn’t mean that it can’t pose a problem, particularly if it interferes with your everyday life.

So when does a harmless habit turn into an issue? Here are the physical and psychological signs that you may need to give your boner a bit of a breather.

1. You hurt yourself.

Some guys masturbate so often that they actually hurt themselves, says Dr Tobias Köhler, a urologist at Southern Illinois University.

Read more: 5 masturbation secrets you don’t know about

These injuries could be mild (e.g., skin chafing) or a more serious condition like Peyronie’s disease, or scar tissue build-up in the shaft of your penis that can result from using too much pressure while stroking, Dr Köhler explains.

This may sound obvious, but if you’re masturbating so often that you’re hurting yourself, you need to cut back, he warns.

2. Your job suffers.

Maybe you stay in on Friday nights instead of meeting up with friends, or you’ve been late to meetings because you were giving yourself a hand in the men’s room.

Read more: Can watching too much porn give you erectile dysfunction?

Either way, if you find that your masturbation habits are interfering with your social life, your job or your desire to have sex with your partner, then it’s time to adjust your routine, Drake says.

3. Your sex life suffers.

Some guys who masturbate a lot use one specific type of stimuli – say, certain categories of porn coupled with specific hand movements. When it comes time for them to actually have sex, they find that they can’t recreate the same type of excitement, Dr Köhler explains.

Read more: Porn stars explain why you shouldn’t expect to have sex like a porn star

Basically, if you watch the same porn or use the same hand motions every time you masturbate, it teaches your brain and body to get off that way and that way alone. If you’re having sex with a real-life partner, this could cause serious problems, both in terms of keeping it up and getting erect in the first place. “If that happens, you have a problem that needs to be addressed,” says Dr Köhler.

4. You always think about it.

You wake up wanting to masturbate. At lunch, your mind wanders to your favourite porn scene. Your commute home is almost unbearable, because you just want to sit on the couch with a beer and PornHub.

Read more: Here’s how your sex life affects how much you masturbate

If any of this sounds familiar, and you often find yourself distracted by thoughts of when or how you’re going to yank it next, that’s a strong indication you have a problem, Drake says.

If you realise you have a problem, what should you do about it?

That means doing one of two things: a) cutting yourself off cold turkey, at least for the time being; and b) adopting more of a “harm reduction” approach by setting limits for yourself – for example, making a rule to only masturbate at night.

Read more: 11 shocking facts you never knew about masturbation

Considering you probably don’t want to give up solo orgasms for the rest of your life – masturbation is, after all, an integral part of any healthy sex life – you’ll probably want to opt for the latter approach.

Set rules for yourself and see if you can adhere to them. If you can’t, and you find yourself slipping back into harmful old habits, consider seeing a therapist, as there might be a deeper psychological issue at play.

Bottom line? Indulging in a little self-love every now and then is fine. It’s only when it gets in the way of your actual life – or your actual sex life – that it becomes a problem.

This article was originally published on www.menshealth.com

Image credit: iStock

NEXT ON HEALTH24X

Share Button

News24.com | Toddler miraculously survives after being born with brain outside skull

A tot who was given just minutes to live after being born with her brain outside her skull has made an astounding recovery.

Karlie Toland, now 17 months old, is thought to be the only person in the world to be alive with her rare medical condition.

After being born with part of her brain outside of her skull – also known as an encephalocele – doctors predicted Karlie would die within minutes of being born.

But her parents, Gemma Mccusker (24) and Kyle Toland (20), from Belfast, UK, refused to give up on their daughter.

“After giving birth I was told my daughter would die within 20 minutes,” Gemma says.

“I was heartbroken and although she had part of her brain outside of her skull, she looked perfect.”

Doctors sent the tot home to die, but four weeks later Karlie was still clinging to life.

The little girl’s parents claim they were offered no medical help until they visited Belfast’s Royal Hospital for Sick Children.

It was only then that they were reportedly offered a life-changing operation for their daughter to repair the brain tissue poking through her forehead.

“After being discharged from hospital we went home with Karlie and used bottles of sterile water at room temperature and cotton swabs to wipe away the brain fluid leaking from her skull,” Gemma says.

“We had been told Karlie would die in the next few days but she defied everyone and once we got a second opinion four weeks later, she had the operation she desperately needed.”

The surgery took just under five hours and Karlie has come on in leaps and bounds since.

The tot now constantly laughs, smiles, talks and even eats on her own.

Karlie Toland

The overjoyed parents are confident she’ll go on to take her first steps in the next few months.

“Looking at her now makes me so proud, she’s always smiling, laughing and happy, and she’s such a little miracle.”

“We’ve been told by doctors that Karlie is a miracle to be alive and she really is.

“We couldn’t believe it and although no one expected her to progress as her brain doesn’t have the normal three structures, so far she’s on par with other children her age.”

Gemma and Kyle believe the only reason their daughter is alive today is thanks to the work of Dr Mano Shanmuganathan, a neurosurgeon at Belfast’s Royal Hospital for Sick Children.

“We’re so thankful to Dr Mano and that he never gave up on our daughter,” Gemma says.

“His surgery saved her life and has given us a future with Karlie.

“We don’t know what the future holds for Karlie but we’re sure she will continue to defy the odds.”

Source: Magazine Features

Share Button

Failures in power grids: Dynamically induced cascades

A reliable functioning of technical infrastructure networks is essential for our modern, high-tech society. Cascading failures, i.e. chain reactions of failures of different infrastructures, are the cause of many failures of entire networks, e.g. large parts of the European power grids. Although cascading failures are usually influenced by network-wide nonlinear dynamics between the individual failures, their modelling has so far concentrated primarily on the analysis of sequences of failure events of individual infrastructures — however, the dynamics between these events have not been taken into account.

In an article now published by Nature Communications, an analysis scheme is presented which takes into account the event-based character of the chain reaction as well as the specific network dynamic influences.

The international team of scientists from the Center for Advancing Electronics Dresden (cfaed) at TU Dresden and the Max Planck Institute for Dynamics and Self-Organization in Göttingen (Prof. Marc Timme, Dr. Benjamin Schäfer), the Forschungszentrum Jülich (Jun.-Prof. Dr. Dirk Witthaut) and the Queen Mary University of London (Prof. Vito Latora) was able to find out that some transition processes between different states of the power grid take place on a time scale of a few seconds. “These can play a decisive role in the development of collective reactions, which can eventually lead to a ‘blackout.’ In our study we propose a prediction method to identify potentially endangered lines and network components already at the planning stage and, if appropriate, also during the operation of power networks. Such dynamic effects could be integrated into network operators’ risk assessments and system planning. Overall, our results underline the importance of dynamically induced failures for the adjustment processes of the national power grids of various European countries,” says Prof. Marc Timme from the Strategic Chair of Network Dynamics at TU Dresden.

Major power outages, which often affect millions of people, are caused by complex and often non-local interactions between many components. In Europe, for example, the planned shutdown of a line in 2006 led to the failure of large parts of the European grid and affected up to 120 million people. Such unfavorable chain reactions can already build up by switching off a single line in the network. In an advanced stage, a fast dynamic develops, that is based, in particular, on the automatic switch-off devices, which are actually supposed to ensure the safety of the network. This rapid dynamic was the focus of the research of the team of scientists. Professor Dirk Witthaut from Forschungszentrum Jülich explains the reasons: “In recent years, the trend in the electricity sector has continued towards strong networking, the countries are very closely integrated into the European grid. Since such failures anywhere in this network could affect us at any time, we must understand the causes. That’s why we were concerned with these questions: Can we understand how these fast processes work? Can we predict which lines could cause a large-scale power outage?”

“The basic idea behind the security architecture of the power grids is this: If any part of the grid fails, then the power grid should continue to function. The network then takes on a new stable state in order to compensate for the defect. The question of what this state looks like when the network has enough time to find it has already been investigated many times. For the relatively short time scale of the error cascades in power grids, however, our current study is virtually pioneering,” says Vito Latora, Professor of Applied Mathematics and Head of the Complex Systems and Networks Group at Queen Mary University of London.

The scientists investigated the error cascades using a combination of computer simulations and mathematical analyses of simple network models. The static approach was compared with the new dynamic approach using a simulated network in which specific connections are interrupted. Often the broader dynamic view shows that the network can become completely unstable, even if the static approach still predicts stability. Overall, more potential failures are detected and the potential extent of a failure is more accurately predicted. In order to compare the processes found on the model with reality, power line networks with real connection structures were examined, specifically the Spanish, British and French topology. The new analysis method was successfully applied to complex and more realistic networks.

In addition, statistical studies on failures were carried out using the dynamic approach. How many lines fail if a random line is affected? “In many cases the effects are small, i.e. hardly any other lines fail. At the same time, there are a few critical lines that lead to major failures. Taking into consideration possible attacks (physical or virtual, e.g. by hackers) it is extremely important to identify and relieve such critical lines. Therefore, using the dynamic approach, we have developed a tool that predicts which lines are critical,” describes Dr. Benjamin Schäfer from cfaed at TU Dresden.

Finally, initial investigations on the spread of cascades in the network were carried out. “Instead of purely geographical distances between different locations, we consider the so-called ‘effective distance,’ which takes into account how strongly different parts of the power grid can influence each other. However, in order to gain a better understanding, further research is necessary to examine the possibility of stopping such cascades,” explains Schäfer.

Story Source:

Materials provided by Technische Universität Dresden. Note: Content may be edited for style and length.

Share Button

Why bioelectrodes for energy conversion are not stable

Researchers at the Ruhr-Universität Bochum have discovered why bioelectrodes containing the photosynthesis protein complex photosystem I are not stable in the long term. Such electrodes could be useful for converting light energy into chemical energy in an environmentally friendly way. However, the proteins, which are stable in nature, are not functional in semi-artificial systems in the long term because reactive molecules are formed that damage the photosystem I.

The team around Dr Fangyuan Zhao, Dr Felipe Conzuelo and Prof Dr Wolfgang Schuhmann from the Centre for Electrochemical Sciences together with colleagues from the Bochum Chair of Plant Biochemistry describes the results in the journal Nature Communications.

Promising technology: Bioelectrodes

Felipe Conzuelo describes the background of the research project: “Society faces the great challenge of having to find more sustainable ways of converting and storing energy.” Here it is important to understand the processes that currently still limit the lifetime of promising techniques. “Because this is the only way to develop stable solutions in the future,” Fangyuan Zhao adds.

Promising techniques include electrodes in which the photosystem I is embedded in an osmium-containing polymer. When the photosynthetic protein is activated by light, it can separate positive and negative charges very efficiently. This charge gradient can serve as a source of energy, so to speak, and drive further processes.

Reactive oxygen species limit lifetime

“The photosystem I not only works efficiently, but also occurs in nature in large quantities, which makes it interesting for semi-artificial systems for energy conversion,” explains Felipe Conzuelo. However, if the bioelectrode operates in an oxygen-containing environment, it suffers damage in the long term.

The scientists from Bochum used so-called scanning electrochemical microscopy to observe the processes on the electrode surface. On this surface, the photosystem I is embedded in an osmium-containing polymer. They observed which molecules are formed on the electrode surface when it is exposed to light. To do this, they exposed the system to different oxygen concentrations.

It was found that irradiation with light produced reactive oxygen species and hydrogen peroxide, which can damage the photosystem I in the long term. “Based on our results, it seems advisable to design bioelectrodes with photosystem I so that they can operate in an oxygen-free environment,” Conzuelo concludes.

Story Source:

Materials provided by Ruhr-University Bochum. Note: Content may be edited for style and length.

Share Button

A genetic algorithm predicts the vertical growth of cities

The increase of skyscrapers in a city resembles the development of some living systems. Spanish researchers have created an evolutionary genetic algorithm that, on the basis of the historical and economic data of an urban area, can predict what its skyline could look like in the coming years. The method has been applied successfully to the thriving Minato Ward, in Tokyo.

Scientists have realized that the growth of cities follows patterns similar to those of certain self-organized biological systems. Inspired by nature, they have developed genetic algorithms that predict how the number of skyscrapers and other buildings in an urban area will increase.

“We operate within evolutionary computation, a branch of artificial intelligence and machine learning that uses the basic rules of genetics and Darwin’s natural selection logic to make predictions,” explains architect Ivan Pazos.

“In this type of computing, a multitude of possible solutions to a problem are randomly combined,” adds the expert, who currently works for a Japanese architectural firm, “and a selection system is choosing the best results. This operation is repeated again and again until the algorithms get the most accurate results.”

In this way, Pazos and a team of researchers from the University of A Coruña (Spain) have created algorithms -based on other standard genetic algorithms- that learn the growth patterns of urban districts using historical data from the construction sector and different economic parameters.

The study, published in the Journal of Urban Planning and Development, has focused on one of the neighbourhoods with the highest vertical growth in the world in recent years: the Minato Ward, in Tokyo, where the headquarters of multinational companies such as Mitsubishi, Honda, NEC, Toshiba or Sony, are located. “This methodology could have been applied to any other city with a high number of skyscrapers,” Pazos points out.

In 2015, once all the information had been gathered, the authors created a series of maps and 3D representations of Minato to be able to predict the number of buildings and their probable locations within this booming ward in the following years during the 2016-2019 period.

“The predictions of the algorithm have been very accurate with respect to the actual evolution of the Minato skyline in 2016 and 2017,” says Pazos, who comments: “Now we are evaluating their accuracy for 2018 and 2019 and it seems, according to the observations, that they will be 80% correct.”

According to the authors, the algorithm not only estimates the number of future skyscrapers in a neighbourhood of the city, but also the specific areas where they will be most likely be located.

“The final conclusion of the study is that evolutionary computation seems to be able to find growth patterns that are not obvious in complex urban systems, and by means of its subsequent application, it serves the function of predicting possible scenarios for the evolution of cities.” concludes Pazos.

Share Button

Every Question You Were Afraid to Ask About Tapeworms, Answered

Parasites in general are a disturbing thought, but for some reason tapeworms are especially freaky—hence the Internet firestorm over NHL prospect Carson Meyer. For months, the 21-year-old was losing weight and feeling exhausted. Doctors couldn't figure out what was wrong with him, after 10 blood tests, including for mono.

Finally, a 25-inch, orange tapeworm came out of his body, People reported. “I was freaking out. Absolutely freaking out,” he said. Uhh, understandable! 

Doctors told Meyer the tapeworm had probably been inside of him for over. a. year. Luckily, he's now feeling better–but how does that even happen?

All of this got us wondering about the medical specifics here, so we went digging. Here's everything you need to know—but were afraid to Google—about these unsettling infections.

RELATED: 18 Most Sickening Food Ingredients

First of all, what exactly are tapeworms?

Tapeworms are flat worm parasites that take up residence in the intestines of people and animals. There are a few species, but the one that most commonly occurs in the United States is Taenia solium, also known as pork tapeworm, according to the U.S. Centers for Disease Control and Prevention (CDC).

The “head” of the worm attaches to the wall of a person's intestine and absorbs nutrients. From there, tapeworms grow a bunch of little segments called proglottids, which contain eggs, and are often passed out of the body with the host's stool.

How do tapeworms get into your GI tract in the first place?

The most common way to pick up a tapeworm is through eating undercooked meat. Diphyllobothrium latum, the type of tapeworm Meyer had, comes from eating undercooked fish.

Some tapeworm eggs can survive for days or months in feces from infected humans or animals. If cattle or pigs eat infected excrement (usually because it gets into their feed somehow), the eggs can hatch and the larvae form into cysts that make their way into the animals’ muscles.

When the animal is slaughtered for consumption, the tapeworm cysts end up in the meat aisle at the grocery store. If the meat is cooked properly, the larvae die, and the meat is safe to eat. But if you eat it raw or undercooked, a larva can enter your GI tract, where it develops into an adult and can grow up to 25 (!) meters long, depending on the species. (That's 82 feet, for the metric-challenged.)

RELATED: Sharing a Bathroom With Many Others? Your Toothbrush Likely Has ‘Fecal Matter’

So then how did it get into that one guy's brain?

In 2015, Luis Ortiz, a 26-year-old man in California, had a “still wiggling” tapeworm pulled from his brain—shudder. The Internet erupted over how serious his infection was: He needed emergency brain surgery, and he ultimately spent close to three months in the hospital recovering. Thankfully, what happened to Ortiz is rare, and tapeworms aren't nearly that dangerous in most cases–but tapeworm larvae can travel in your body and survive in brain, liver, and lung tissue.

The good news is that in the United States, this kind of infection—called cysticercosis—is extremely rare. It's usually caused by ingesting the pork tapeworm eggs directly from infected human fecal matter.

This usually means that you get it from eating something contaminated with feces from another infected person. Also: it's possible to develop cysticercosis after ingesting your own feces (another reason to wash your hands after you use the bathroom); that’s called autoinfection.

Cysticercosis can be very dangerous: When a person ingests these eggs, the larvae can invade the intestinal wall and travel to your organs. If they reach the brain (a potentially fatal condition called neurocysticercosis), that can cause seizures and other neurological symptoms.

How common are they?

While tapeworms are common all over the world, they tend to show up most in Latin America, sub-Saharan Africa, and parts of Europe and Asia. This is why Americans often think of tapeworms as a hazard for international travelers.

The CDC estimates that fewer than 1,000 people in the United States are infected with a tapeworm each year. According to Peter Jay Hotez, PhD, MD, dean of the national school of tropical medicine at Baylor College of Medicine in Houston, Texas, no one is doing active surveillance for tapeworms in the U.S., and so that number is probably a “vast underestimate.”

Still, there is no evidence to suggest that tapeworms are hanging out in every other deli or restaurant, by any means.

RELATED: 3 Things You Can Catch from a Pool

What are the symptoms?

As far as relationships go, the human-tapeworm pairing is unrequited. Contrary to what humans think—get out, get out, get out!—tapeworms are perfectly happy in our GI tract. (Hey, it’s warm and there’s free food.) And they’re so well-adapted to the human body that adult worms often don’t trigger any symptoms in their hosts at all; when they do, it’s usually a stomachache, diarrhea, or weight loss.

So how do you find out that there’s a parasite in your body? Well, there’s a decent chance that you won’t. “[Tapeworms] have a normal life cycle,” Dr. Hotez says. “They can live for up to a few years and then they die.” When that happens, the host simply passes the tapeworm, or it gets absorbed by the intestines.

How do I find out if I have a tapeworm?

Their eggs will show up in your stool. So, well, there's no nice way to put this: most people have to have their poop analyzed to confirm infection.

After providing a stool sample, a doctor will look under a microscope for the eggs, which are less than 1,000th of a millimeter in size, Dr. Hotez says. From there, doctors will likely treat the infection with praziquantel, a very effective antiparasitic drug.

You can also pass a whole proglottid segment in your stool, and if you happen to see it moving—yes, moving—before you flush that’s another tip-off.

RELATED: 5 Ways to Tell If You Need an Antibiotic

How do I prevent a tapeworm infection?

Since most people get it from raw or undercooked meat, the best advice is to really be sure you're fully cooking meat, the CDC says. If you’re cooking whole cuts of beef or pork, use a food thermometer to check that the temperature reaches at least 145° F (63° C) for whole cuts and 160° F for ground meat.

Share Button