A powerful laser breakthrough

The ability to harness light into an intense beam of monochromatic radiation in a laser has revolutionized the way we live and work for more than fifty years. Among its many applications are ultrafast and high-capacity data communications, manufacturing, surgery, barcode scanners, printers, self-driving technology and spectacular laser light displays. Lasers also find a home in atomic and molecular spectroscopy used in various branches of science as well as for the detection and analysis of a wide range of chemicals and biomolecules.

Lasers can be categorized based on their emission wavelength within the electromagnetic spectrum, of which visible light lasers — such as those in laser pointers — are only one small part. Infrared lasers are used for optical communications through fibers. Ultraviolet lasers are used for eye surgery. And then there are terahertz lasers, which are the subject of investigation at the research group of Sushil Kumar, an associate professor of Electrical and Computer Engineering at Lehigh University.

Terahertz lasers emit radiation that sits between microwaves and infrared light along the electromagnetic spectrum. Their radiation can penetrate common packaging materials such as plastics, fabrics and cardboard, and are also remarkably effective in optical sensing and analysis of a wide variety of chemicals. These lasers have the potential for use in non-destructive screening and detection of packaged explosives and illicit drugs, evaluation of pharmaceutical compounds, screening for skin cancer and even the study of star and galaxy formation.

Applications such as optical spectroscopy require the laser to emit radiation at a precise wavelength, which is most commonly achieved by implementing a technique known as “distributed-feedback.” Such devices are called single-mode lasers. Requiring single-mode operation is especially important for terahertz lasers, since their most important applications will be in terahertz spectroscopy. Terahertz lasers are still in a developmental phase and researchers around the world are trying to improve their performance characteristics to meet the conditions that would make them commercially viable.

As it propagates, terahertz radiation is absorbed by atmospheric humidity. Therefore, a key requirement for such lasers is an intense beam such that it could be used for optical sensing and analysis of substances kept at a standoff distance of several meters or more, and not be absorbed. To this end, Kumar’s research team is focused on improving their intensity and brightness, achievable in part by increasing optical power output.

In a recent paper published in the journal Nature Communications, the Lehigh team — supervised by Kumar in collaboration with Sandia National Laboratories — reported on a simple yet effective technique to enhance the power output of single-mode lasers that are “surface-emitting” (as opposed to those using an “edge-emitting” configuration). Of the two types, the surface-emitting configuration for semiconductor lasers offers distinctive advantages in how the lasers could be miniaturized, packaged and tested for commercial production.

The published research describes a new technique by which a specific type of periodicity is introduced in the laser’s optical cavity, allowing it to fundamentally radiate a good quality beam with increased radiation efficiency, thus making the laser more powerful. The authors call their scheme as having a “hybrid second- and fourth-order Bragg grating” (as opposed to a second-order Bragg grating for the typical surface-emitting laser, variations of which have been used in a wide variety of lasers for close to three decades). The authors claim that their hybrid grating scheme is not limited to terahertz lasers and could potentially improve performance of a broad class of surface-emitting semiconductor lasers that emit at different wavelengths.

The report discusses experimental results for a monolithic single-mode terahertz laser with a power output of 170 milliwatts, which is the most powerful to date for such class of lasers. The research shows conclusively that the so-called hybrid grating is able to make the laser emit at a specific desired wavelength through a simple alteration in the periodicity of imprinted grating in the laser’s cavity while maintaining its beam quality. Kumar maintains that power levels of one watt and above should be achievable with future modifications of their technique — which might just be the threshold needed to be overcome for industry to take notice and step into potential commercialization of terahertz laser-based instruments.

Story Source:

Materials provided by Lehigh University. Note: Content may be edited for style and length.

Share Button

Why cereal crops are so drought-tolerant

Whether barley, wheat, maize or rice: The grass family includes all the major cereals. They are vital for feeding the world’s population. Farmers produce 80 percent of all plant-based foods from grass crops. This success is due in part to the plants’ ability to adjust more quickly to dry conditions and sustain lack of water better than other plants.

But why are grasses more tolerant to water scarcity? Can other food crops be bred for this property, too, to assure or boost agricultural yields in the future? This could be important in the face of a growing world population and climate change that will entail more periods of dry and hot weather.

The plant researchers Professor Rainer Hedrich, Professor Dietmar Geiger and Dr. Peter Ache from Julius-Maximilians-Universität Würzburg (JMU) in Bavaria, Germany, are looking into these questions. They studied brewing barley to determine why grasses are more stress-tolerant and are therefore “better” crop plants than potatoes and the likes.

Two amino acids make the difference

The scientists discovered that this difference can be attributed to the protein SLAC1 of the guard cells. Just two amino acids, the building blocks that make up proteins, are responsible for the plant’s drought tolerance. “We now want to find out whether this small difference can be harnessed to make potatoes, tomatoes or rapeseed more tolerant to stress as well,” says Rainer Hedrich.

The new insights have been published in the journal Current Biology where Hedrich, Geiger and Ache describe how they pinpointed the tiny difference between grasses and other plants.

Ion transport is a key process

The JMU researchers began scrutinising microscopically small leaf pores called stomata. These openings admit carbon dioxide for photosynthesis into the plant. But they also serve as outlets for water. To prevent losing too much water through evaporation, land plants have learned during evolution to actively open and close their stomata using special guard cells. Membrane proteins such as SLAC1 play a key role in this regulatory process: acting like channels, they guide ions into and out of the cells.

Hedrich is convinced that a basic understanding of the molecular goings-on during ion transport through the plasma membrane of the guard cells is the key to improving the drought tolerance and yields of agricultural crop plants.

Ion shuttles make leaf pores more efficient

The stomata of grasses have a special feature: The pore is bordered by two pairs of cells where other plants only have a single cell pair. Grass cereals boast two dumbbell-shaped guard cells that form and regulate the pore. Additionally, they are flanked by two subsidiary cells.

The JMU researchers have demonstrated that the subsidiary cells absorb and store the potassium and chloride from the guard cells when the pore closes. When the stoma opens, they pass the ions back to the guard cells. “Our cereals use the subsidiary cells as a dynamic reservoir for osmotically active ions. This ion shuttle service between guard cell and subsidiary cell allows the plant to regulate the pores particularly efficiently and quickly,” Dietmar Geiger explains.

Two measuring systems for more drought resistance

There is a second mechanism that makes grasses more tolerant to dry conditions. When water is scarce, plants produce the stress hormone ABA (abscisic acid). Inside the guard cells, it activates the ion channels of the SLAC1 family, thereby initiating the closing of the stomata to prevent the plant from withering within a matter of minutes.

“Interestingly, we found that nitrate must be present in brewing barley and other grass cereals in addition to ABA to enable the pore to close,” Peter Ache says. The nitrate concentration allows the barley to measure the shape the photosynthesis is in. If it works smoothly, nitrate levels are low.

Barley hence relies on two measuring systems: It uses ABA to register water availability and nitrate to assess photosynthesis performance. “By combining the two, the barley is better able than other plants to negotiate between the extremes of ‘dying of hunger’ and ‘dying of thirst’ when facing water scarcity,” Rainer Hedrich explains

Testing the nitrate sensor in other plants

Which mechanism is responsible for the difference in stoma regulation at the molecular level? To answer this, the researchers analysed SLAC1 channels of various herbaceous plants compared to grasses. This allowed them to identify the “nitrate sensor” of the grasses: It is comprised of a motif of two amino acids which first occurred in moss during evolution and was subsequently further optimised to give the guard cells their unique properties.

In a next step, the team of researchers wants to establish whether herbaceous agricultural crops also benefit from having a nitrate sensor. To achieve this, the scientists want to fit arabidopsis plants that lack the SLAC1 channel with the SLAC1 channel of barley. “If this step increases their stress tolerance, we can consider breeding optimised potatoes, tomatoes or rapeseed,” Hedrich says.

Financed in the BayKlimaFit programme

The research activities were undertaken within the scope of the Bavarian BayKlimaFit consortium. Its goal is to find strategies to make food crops fit for climate change. The consortium receives funding from the Bavarian State Ministry of the Environment and Consumer Protection.

Share Button

New Wales Down’s syndrome test ‘to cut miscarriage risk’

Pregnant women in Wales will become the first in the UK to receive a non-invasive test for Down’s syndrome on the NHS.

Share Button

Capturing of the rare Yanbaru whiskered bat

The critically endangered Yanbaru whiskered bat, Myotis yanbarensis, has been caught for the first time on Okinawa Island since its discovery 22 years ago. Kyoto University doctoral student Jason Preble succeeded in the capture on the night of 20 February, during a survey in the Yanbaru Forest in the north of Okinawa’s main island.

The rare bat species was first discovered in the subtropical Yanbaru Forest in 1996, when two specimens were collected. It was later observed on a few occasions on the islands Tokunoshima and Amami-Oshima, but no sightings were reported again on Okinawa Island.

This small tree-dwelling bat, endemic to these islands, thus became a serious conservation concern and was declared ‘critically endangered,’ the highest risk level, by both the Japanese Ministry of Environment and the International Union for the Conservation of Nature.

On 20 February 2018 at 20:05, Preble captured one male Myotis yanbarensis weighing 4.9 g and apparently in good health. Three nights later he caught a second male bat weighing 5.2 g. Upon release, he tracked these individuals using VHF transmitters. A third male was also caught four days later. The captures took place in the former United States military Northern Training Area, facilitated by a high-tech acoustic lure that broadcasts synthesized bat calls.

Moreover, Preble was able to record the bat’s echolocation call, vital data that was previously unreported.

This large area of forest was returned to Japan in December 2016, and Kyoto University’s Island Bat Research Group, led by Christian Vincenot, was among the first teams to be granted access by the Ministry of Environment, Okinawa Forestry Office, and Aha Dam authority.

The presence of the Yanbaru whiskered bat indicates that this zone, which was off limits for over a half-century, may have served as an unintended wildlife sanctuary. This discovery revives hope for conservation of this rare species, while also suggesting that Myotis yanbarensis may be range-restricted to a small part of the Yanbaru Forest and therefore may continue to be at risk of local extinction.

Extreme caution is therefore advised in the management of this area, which is currently a candidate for UNESCO Natural Heritage status. Bats are often highly sensitive to infrastructure development, as seen in the steep decline in endangered populations following the construction in 2013 of a new airport runway over bat caves on Ishigaki island, also in the Okinawan archipelago.

Story Source:

Materials provided by Kyoto University. Note: Content may be edited for style and length.

Share Button

City fish evolve different body forms than country fish

A North Carolina State University study examining the effects of urbanization on the evolution of fish body shape produced both expected and surprising results: One fish species became more sleek in response to urbanization, while another species became deeper bodied in urban areas.

Generally, urbanization produces conditions that make water in streams flow more variably and more quickly during rain storms. So NC State biologists hypothesized that fish would quickly evolve a body shape that improves swimming efficiency in response to changes in stream water velocity caused by urbanization.

“We wanted to test rapid body shape evolution in western and central North Carolina stream fish in response to urbanization,” said Brian Langerhans, associate professor of biology at NC State and senior author of a paper describing the research. “While some species cannot handle the altered conditions and have disappeared or reduced in abundance, some remaining species may rapidly evolve adaptive trait changes to contend with the human-induced changes in their environment.”

The study combined fieldwork in streams to document contemporary patterns across different fish species and regions in North Carolina; examination of museum specimens to track changes in fish body shape over time; and lab experiments to understand whether nature or nurture affect fish body shape changes.

In the field, one species of fish, a type of minnow called western blacknose dace (Rhinichthys obtusus), reflected predicted changes: its body shape became more streamlined in urbanized areas. Langerhans said the body shape changes likely help make it better able to handle changing water conditions. Meanwhile, its body shape in more rural areas, regions largely devoid of urban influence, remained less sleek.

Yet the study also showed that a minnow cousin, the creek chub (Semotilus atromaculatus), actually became less sleek in more urbanized areas. Creek chub in rural areas remained at baseline shape, while those living in streams surrounded by large amounts of impervious surfaces like roads and sidewalks developed deeper bodies.

“One species showed morphological changes that nicely matched evolutionary predictions of increased streamlining to better handle the altered conditions, but the other species showed a change that did not match our simple prediction, highlighting how different species can solve similar problems in different manners,” Langerhans said.

Museum specimens of rural and urban creek chub dating back half a century showed historical urban creek chub body shapes similar to those in modern urban areas: more boxy and less streamlined. Historically rural areas, meanwhile, had more sleek creek chub, similar to those observed in these streams today. However, in streams urbanized around 30 years ago, creek chub bodies changed over time from a sleek shape characteristic of rural streams toward deeper bodies characteristic of modern urban creek chub.

Lab-raised creek chub showed nature had a bigger influence than nurture, as creek chub individuals from rural and urban areas raised in a common environment showed the same differences as modern-day field samples, with urban creek chub less streamlined than rural.

“Human activities are having real-time evolutionary impacts on the organisms capable of living in our human-dominated environments; some of these changes may be predictable and some may be difficult to predict,” Langerhans said.

Story Source:

Materials provided by North Carolina State University. Note: Content may be edited for style and length.

Share Button

Mercury’s thin, dense crust

Mercury is small, fast and close to the sun, making the rocky world challenging to visit. Only one probe has ever orbited the planet and collected enough data to tell scientists about the chemistry and landscape of Mercury’s surface. Learning about what is beneath the surface, however, requires careful estimation.

After the probe’s mission ended in 2015, planetary scientists estimated Mercury’s crust was roughly 22 miles thick. One University of Arizona scientist disagrees.

Using the most recent mathematical formulas, Lunar and Planetary Laboratory associate staff scientist Michael Sori estimates that the Mercurial crust is just 16 miles thick and is denser than aluminum. His study, “A Thin, Dense Crust for Mercury,” will be published May 1 in Earth and Planetary Science Letters and is currently available online.

Sori determined the density of Mercury’s crust using data collected by the Mercury Surface, Space Environment and Geochemistry Ranging (MESSENGER) spacecraft. He created his estimate using a formula developed by Isamu Matsuyama, a professor in the Lunar and Planetary Laboratory, and University of California Berkeley scientist Douglas Hemingway.

Sori’s estimate supports the theory that Mercury’s crust formed largely through volcanic activity. Understanding how the crust was formed may allow scientists to understand the formation of the entire oddly structured planet.

“Of the terrestrial planets, Mercury has the biggest core relative to its size,” Sori said.

Mercury’s core is believed to occupy 60 percent of the planet’s entire volume. For comparison, Earth’s core takes up roughly 15 percent of its volume. Why is Mercury’s core so large?

“Maybe it formed closer to a normal planet and maybe a lot of the crust and mantle got stripped away by giant impacts,” Sori said. “Another idea is that maybe, when you’re forming so close to the sun, the solar winds blow away a lot of the rock and you get a large core size very early on. There’s not an answer that everyone agrees to yet.”

Sori’s work may help point scientists in the right direction. Already, it has solved a problem regarding the rocks in Mercury’s crust.

Mercury’s Mysterious Rocks

When the planets and Earth’s moon formed, their crusts were born from their mantles, the layer between a planet’s core and crust that oozes and flows over the course of millions of years. The volume of a planet’s crust represents the percentage of mantle that was turned into rocks.

Before Sori’s study, estimates of the thickness of Mercury’s crust led scientists to believe 11 percent of the planet’s original mantle had been turned into rocks in the crust. For the Earth’s moon — the celestial body closest in size to Mercury — the number is lower, near 7 percent.

“The two bodies formed their crusts in very different ways, so it wasn’t necessarily alarming that they didn’t have the exact same percentage of rocks in their crust,” Sori said.

The moon’s crust formed when less dense minerals floated to the surface of an ocean of liquid rock that became the body’s mantle. At the top of the magma ocean, the moon’s buoyant minerals cooled and hardened into a “flotation crust.” Eons of volcanic eruptions coated Mercury’s surface and created its “magmatic crust.”

Explaining why Mercury created more rocks than the moon did was a scientific mystery no one had solved. Now, the case can be closed, as Sori’s study places the percentage of rocks in Mercury’s crust at 7 percent. Mercury is no better than the moon at making rocks.

Sori solved the mystery by estimating the crust’s depth and density, which meant he had to find out what kind of isostasy supported Mercury’s crust.

Determining Density and Depth

The most natural shape for a planetary body to take is a smooth sphere, where all points on the surface are an equal distance from the planet’s core. Isostasy describes how mountains, valleys and hills are supported and kept from flattening into smooth plains.

There are two main types isostasy: Pratt and Airy. Both focus on balancing the masses of equally sized slices of the planet. If the mass in one slice is much greater than the mass in a slice next to it, the planet’s mantle will ooze, shifting the crust on top of it until the masses of every slice are equal.

Pratt isostasy states that a planet’s crust varies in density. A slice of the planet that contains a mountain has the same mass as a slice that contains flat land, because the crust that makes the mountain is less dense than the crust that makes flat land. In all points of the planet, the bottom of the crust floats evenly on the mantle.

Until Sori completed his study, no scientist had explained why Pratt isostasy would or wouldn’t support Mercury’s landscape. To test it, Sori needed to relate the planet’s density to its topography. Scientists had already constructed a topographic map of Mercury using data from MESSENGER, but a map of density didn’t exist. So Sori made his own using MESSENGER’s data about the elements found on Mercury’s surface.

“We know what minerals usually form rocks, and we know what elements each of these minerals contain. We can intelligently divide all the chemical abundances into a list of minerals,” Sori said of the process he used to determine the location and abundance of minerals on the surface. “We know the densities of each of these minerals. We add them all up, and we get a map of density.”

Sori then compared his density map with the topographic map. If Pratt isostasy could explain Mercury’s landscape, Sori expected to find high-density minerals in craters and low-density minerals in mountains; however, he found no such relationship. On Mercury, minerals of high and low density are found in mountains and craters alike.

With Pratt isostasy disproven, Sori considered Airy isostasy, which has been used to make estimates of Mercury’s crustal thickness. Airy isostasy states that the depth of a planet’s crust varies depending on the topography.

“If you see a mountain on the surface, it can be supported by a root beneath it,” Sori said, likening it to an iceberg floating on water.

The tip of an iceberg is supported by a mass of ice that protrudes deep underwater. The iceberg contains the same mass as the water it displaces. Similarly, a mountain and its root will contain the same mass as the mantle material being displaced. In craters, the crust is thin, and the mantle is closer to the surface. A wedge of the planet containing a mountain would have the same mass as a wedge containing a crater.

“These arguments work in two dimensions, but when you account for spherical geometry, the formula doesn’t exactly work out,” Sori said.

The formula recently developed by Matsuyama and Hemingway, though, does work for spherical bodies like planets. Instead of balancing the masses of the crust and mantle, the formula balances the pressure the crust exerts on the mantle, providing a more accurate estimate of crustal thickness.

Sori used his estimates of the crust’s density and Hemingway and Matsuyama’s formula to find the crust’s thickness. Sori is confident his estimate of Mercury’s crustal thickness in its northern hemisphere will not be disproven, even if new data about Mercury is collected. He does not share this confidence about Mercury’s crustal density.

MESSENGER collected much more data on the northern hemisphere than the southern, and Sori predicts the average density of the planet’s surface will change when density data is collected over the entire planet. He already sees the need for a follow-up study in the future.

The next mission to Mercury will arrive at the planet in 2025. In the meantime, scientists will continue to use MESSENGER data and mathematical formulas to learn everything they can about the first rock from the sun.

Share Button

Health24.com | From not even walking fit to Comrades – how you can do it too

We all have that one friend who never stops moving. For me, that’s Carla du Toit. This Duracell Bunny will be up at 4am for gym, or keen to run after 8pm – and plenty in between. Does she sleep? Who knows…

She’s been like this since I met her, so it came as a shock when she told me she’d actually been a bit on the chubby side during high school, and that she hasn’t always worked out. What? This girl who’s run Comrades three times? Naturally, I had to get her to share her inspirational story.

The beginning

Carla grew up doing little exercise – some netball here and there, but it wasn’t part of her routine… yet.

When she moved to Stellenbosch for varsity, she made new friends who worked out daily. Also, Carla didn’t own a car at that stage, so she needed to do a lot of walking to get around.

Read more: The 4 best ways to ease into exercise if you’re plus-size or a beginner

One of the first friends Carla made at uni was addicted to daily workouts and running. Keen for a challenge, Carla signed up at the local gym. A routine-lover, she went all-in.

“I would walk to the gym every day and do a workout,” Carla says. Not really knowing how all the machines worked, she experienced the same struggle we all go through as beginners. “My first spinning class almost killed me!” she adds. Ironically, she’s a qualified spinning instructor now.

As winter approached and the days got shorter, Carla had to run home to get back before dark. “The running became part of my workout and I really enjoyed it,” she adds. Her fitness buddy had a 7km run planned and invited Carla to join.

This suggestion was met with a little nervous excitement. “I couldn’t imagine running 7km!” But she did it – and it felt amazing.

Becoming a runner

“I moved back to KZN half-way through second year,” Carla says, “When I got to the airport my Dad didn’t recognise me!” Carla knew she’d lost some weight, but she hadn’t realised how much. Her friends back home were blown away by how incredible she was looking.

Read more: Even one minute of running a day can be good for you

“There’s no gym near my house in KZN,” Carla adds, “but I wanted to keep up what I’d started, so I signed up for a 10km race that was coming up.” While she ran the 10km, she got chatting to a running group. They invited her to join them for their morning runs… at 4:30am. And she did.

Committing to Comrades

“I remember the exact place I committed to Comrades,” Carla says. “I told Paul from the running group (he’s completed Comrades many times) that I was in. He wanted to know if I meant what I said,” Carla says. She really did. She was all-in for the training and that 110% commitment.

Comrades, marathon, runners, athletes, runners, fi

Read more: When should you run an ultra marathon?

When D-day (or C-day) finally arrived, Carla had put in the hours, blood, sweat and beers. She ran with a couple of the running group members and all was well until she fell on the 80km mark. “I was so exhausted, I just lay there and cried,” she says. In such a heavily attended race, lying on the ground is not ideal – or safe.

“Paul pulled me up and shouted at me,” Carla remembers. “He told me to keep f#cking running and that I was going to finish.” Some tough love, but it was the reason she ran those last 10km and made it across the line.

“I cannot put the feeling [of finishing] into words!” She exclaims. “It is literally where the term ‘tears of joy’ originated.” Kind of makes you want to run it too, doesn’t it?

‘Anyone can do it…’

“… If you truly commit!” This is how Carla feels about most things in life. If you want it badly enough and put in the effort, the goal can be achieved. Carla has completed three Comrades and is chasing her fourth. Of her many inspiring running achievements, she’s also proud of her sub-5 Two Oceans Marathon. But she’s only getting started – there’s so much more to squeeze into this one life.

Feeling inspired? Here are 10 things you should know before running your first marathon.

This article was originally published on www.womenshealthsa.co.za

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Health24.com | What are the biggest medical insurance claims?

During 2017, the largest death claim was for R36.7 million, which was for a 48-year-old trucking business owner who had died in a motor vehicle accident. The largest critical illness claim was for a R5.4 million, for a 46-year-old orthopaedic surgeon who had suffered a heart attack.

These are some of the many revelations from Momentum’s Claim Statistics Report for 2017.

Another important observation is that middle-aged business people constantly topped the company’s death claims for the past four years, including 2017. During this time, the highest death claims were for business people who died as a result of unnatural causes, such as murder, motor vehicle and aviation accidents.

Further categories

The largest disability claim came in at R9.9 million, for a financial planner suffering from a mental disorder. And the insurer, according to his income protection benefit, is paying him an additional R93 000 a month.

Momentum Myriad Claim Statistics Largest Claims fo

The largest income disability claim was R321 000 per month, where a food and beverage business owner was suffering from a kidney disease.

Major causes

Even though the highest death claim was for an unnatural death, cardiovascular conditions and cancer continue to dominate the death claims category.

Cardiovascular conditions made up 40% of the death claims and cancer 18%. Respiratory and nervous system conditions made up 11% and 9% respectively.

Momentum Myriad Claim Statistics Major Death Claim

Critical illness claims were also dominated by conditions and illness relating to cardiovascular disease and cancer, with cancer topping the list at 38% and cardiovascular coming second at 21%.

Momentum Myriad Claim Statistics for 2017 Major Cr

Lump sum disability claims saw the nervous system being the reason for 34% of the claims, and musculoskeletal conditions second at 21%.

Momentum Myriad Claim Statistics for 2017 Major Ca

Cancer and psychiatric or mental illnesses or conditions stood at 11% and 10%.

For income disability claims, musculoskeletal conditions dominated the category at 32%. Cancer, fractures and hospitalisations, and then psychiatric or mental conditions came in at 9%, 8% and 6%.

Momentum Myriad Claim Statistics for 2017 Major Ca

The part obesity plays

During his presentation, Paddy Padayachee, Head of Claims and Risk Management, said that obesity is a major cause of death in South Africa. According to the World Health Organization, it has been tripled in the last 40 years.

“Obesity leads to coronary heart disease, cancer, diabetes, high blood pressure, and so on. According to the World Health Organization, obesity has tripled in the last 40 years.

“Being overweight can cause 13 types of cancers, and the types which stand out for me are the breast, kidney and bowel cancers.

“People must know that obesity is preventable; if there is no medical condition preventing you from attending to it, there is something one can do about it,” said Padayachee.

Women versus men

For the death claims, 74% of claimants were males and 26% females. The youngest male was 21, and the youngest female 22 years old, whereas the oldest male was 104 and the oldest woman 101 years old.

Critical illness claims saw the youngest male being 21 years old and the youngest female 22. The oldest man was 78 years old and oldest woman was 75. Between males and females, males made up 64% of the claims, and women 36%.

Lump sum disability claims had a smaller age bracket where the youngest male and female were 30 and 36 years old respectively. The oldest male and female were respectively 67 and 70 years old. Male claims made up 68% of the figure, and female claims 32%.

Income disability claims were made up of 62% claims for males and 38% for females. Of these claims, the youngest male and female were 20 and 26 years old respectively, whereas the oldest male and female were 67 and 65.

NEXT ON HEALTH24X

Share Button

Health24.com | Don’t wash your newborn yet…

Is washing your newborn necessary? The waxy coating on your newborn’s skin (vernix caseosa) is the wax that develops in the womb. It contains loads of benefits for your baby when it’s left behind or even rubbed in. The coating is filled with amino acids, proteins, and antibacterial and antimicrobial compounds.

Bathing dos and don’ts

According to the World Health Organization, bathing can wait for up to 24 hours after birth. If this isn’t possible, wait at least six hours. Vernix caseosa is 80% water. It plays the role of a waterproof barrier in the womb. Your baby swims in amniotic fluid for about 40 weeks, and this coating protects their skin from the fluid and any infection while in the womb. Without this protection, your little one’s skin would wrinkle or chap.

Thanks to this waxy coating, your baby passes through the birth canal during delivery easily, with little friction. Vernix also stabilises blood sugar and maintains your baby’s temperature, whereas bathing your newborn can cause their blood sugar to drop.

Vernix also improves breastfeeding. A baby is likely to release stress hormones when taken away from the comfort of their mother. It is difficult to breastfeed a distressed baby, but with the vernix coating still in place, this process is easier.

A little-known factor about vernix is its smell. Wonder why newborns have that fresh and mesmerising smell? This distinctive sweet smell is unique to each baby and only lasts a short time. When you breathe in the special scent, the hormone oxytocin is released, which helps you relax and bond with your little one.

Research suggests that a mother and her baby shouldn’t be separated after birth and should stay in the same room for at least 24 hours. There’s no harm in delaying the first bath. Remember, your little one will have routine tests after their birth and this is just one of the reasons doctors recommend delaying that first bath.

Good to know

  • Humans are the only animals whose newborns are coated in vernix.
  • Research shows that leaving the vernix may even encourage antibacterial and wound healing properties.
  • You will find the gooey substance hidden in your baby’s folds. You can also find it in the folds of the vagina for several days or even weeks. Gently wipe it away or simply leave it.
  • Although your unborn baby can start to hear your voice during the 25th week of your pregnancy, the sound may not be clear because his ears are covered with sound-shielding vernix.
  • Research published in the American Journal of Obstetrics & Gynecology says that the vernix can protect against Group B strep and E. coli bacteria.

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Health24.com | Why your body really doesn’t want you to sleep in this weekend

When the weekend rolls around, you’re probably looking forward to some extra hours under the covers.

But while shutting off your alarm may feel amazing, you might want to drag yourself out of bed at your normal wakeup time, according to preliminary research presented at SLEEP, the annual meeting of the Associated Professional Sleep Societies suggests.

Social jetlag – sleeping in later on the weekends than weekends – may be harmful to your health, researchers from the University of Arizona say.

Read more: 7 weird things that can happen while you sleep

After surveying more than 1 000 adults on their sleep habits, wellbeing and health history, the researchers discovered that for every additional hour people reported sleeping on weekends compared to weekdays, their risk of heart disease increased by 11%.

The results held true even after researchers adjusted for sleep length and insomnia symptoms, both of which have been separately linked to heart issues.

Every hour spent sleeping was also linked to increases on ratings of sleepiness and fatigue, too. Those who slept in were also more likely to describe their health as “fair or poor” rather than “excellent”.

Read more: Hack your bedtime: Your phone can help you sleep better

Social jetlag messes with your circadian rhythm, which, in some way or another, plays a part in fat accumulation, insulin secretion and food absorption, a separate 2015 study found. That raises your risk of metabolic abnormalities, which can put you at risk of heart issues later on.

Sleeping in on weekends also sets you up to feel groggy and more fatigued when Monday comes, too, says Dr Brandy Roane, of Brown University’s Sleep for Science Research Laboratory. That’s because getting up later pushes your body clock back, making it harder for you to fall asleep at a normal time.

Read more: Feel great after a bad night of sleep

So try to keep your weekend wakeup time no more than an hour later than your weekday time, says Dr Roane. That amount of time is unlikely to affect your body clock.

This article was originally published on www.menshealth.com

Image credit: iStock

Share Button