Some 40,000 runners are due to take part in the London Marathon, but are those 26.2 miles doing us harm?
Category Archives: Mind Building
Tiny microenvironments in the ocean hold clues to global nitrogen cycle
Nitrogen is essential to marine life and cycles throughout the ocean in a delicately balanced system. Living organisms — especially marine plants called phytoplankton — require nitrogen in processes such as photosynthesis. In turn, phytoplankton growth takes up carbon dioxide from the atmosphere and helps regulate global climate.
According to new research by Thomas Weber, an assistant professor of Earth and environmental sciences at the University of Rochester, small microenvironments in the deep ocean may hold key clues to the global cycling of nitrogen in seawater.
In a paper published in Nature Geoscience, Weber and his co-author Daniele Bianchi, an assistant professor of atmospheric and oceanic sciences at UCLA, show that small microbes that remove nitrogen from the water exist in these microenvironments and are more widespread than previously thought. Using this data, they developed a computer model that changes the way we think about the marine nitrogen cycle.
“The previous understanding of the nitrogen cycle was that nitrogen was lost from the ocean only in three regions where oxygen is scarce. If we wanted to predict how the nitrogen cycle would respond to climate change, all we needed to do was predict how these three low oxygen regions would expand or contract,” Weber says. “Our study changes that picture by showing that nitrogen loss is actually happening over much larger regions, and we need to think about how the ocean as a whole is changing.”
Most marine organisms “breathe,” or respire, using oxygen. When oxygen is not present in seawater, microbes instead respire using other compounds like nitrate, a form of nitrogen. “This has the net effect of removing the nitrogen from the ocean,” Weber says.
Researchers previously believed anaerobic microbes — small microorganisms and bacteria that do not need oxygen to respire — were only found in pockets of the ocean with exceptionally low oxygen levels; particularly, three regions known as “dead zones.”
Weber and Bianchi have developed a computer model that takes into account new genetic data gathered from ocean microbes. The data indicates that anaerobic microbes exist not only in areas of unoxygenated water, but somehow thrive in areas of the ocean where there is oxygen. Nitrogen, therefore, may be lost across much of the ocean, not just in areas where oxygen is scarce.
“One of the biggest revolutions in oceanography in recent years has been the genomic revolution,” Weber says. “Oceanographers have been able to measure all of the genes present in seawater.” One of their discoveries was that the genes allowing anaerobic respiration are not just found in the three regions; the genes have been found much more widespread throughout the ocean.
Whenever oxygen is available, there should not be organisms that respire anaerobically, Weber says. “They should be outcompeted by things that use oxygen, because that’s a much more efficient way to respire.”
How then, do these anaerobic organisms survive in areas where oxygen is present?
Weber and Bianchi found that small “microenvironments” depleted of oxygen exist all over the deep ocean in organic-rich “marine snow” — particles of organic matter, such as dead plankton cells and zooplankton feces, stuck together. Microbes gain energy by eating the organic matter and using oxygen to respire. If the respiration is intense enough inside the particles, all the oxygen can run out and the microbes will switch to respire using compounds besides oxygen.
“We suggest that anaerobic microbes may thrive in vast swaths of the oxygenated ocean, within sinking organic ‘marine snow,'” Bianchi says. “This changes the way we think of the nitrogen cycle and, more generally, anaerobic metabolism in the ocean, and suggests that both could respond to climate change in ways that challenge our current understanding.”
Global warming causes ocean temperatures to rise, resulting in an increased loss of oxygen, which can then affect the nitrogen budget across the globe. When humans perturb one part of the system, it can have unexpected effects. But computer models can help better predict these consequences.
“Ocean warming is occurring because of human carbon dioxide emissions, which warm the earth as a whole,” Weber says. “Indirectly, this alters the oxygen and nitrogen content of the ocean. Eventually marine phytoplankton growth and their ability to take up carbon dioxide is impacted, which then feeds back on climate change. Our new work and other modeling efforts will help us better plan for these consequences.”

Animal study connects fear behavior, rhythmic breathing, brain smell center
“Take a deep breath” is the mantra of every anxiety-reducing advice list ever written. And for good reason. There’s increasing physiological evidence connecting breathing patterns with the brain regions that control mood and emotion.
Now, Minghong Ma, PhD, a professor of Neuroscience in the Perelman School of Medicine at the University of Pennsylvania, and Penn doctoral student Andrew Moberly, have added neurons associated with the olfactory system to the connection between behavior and breathing. These findings are published this week in Nature Communications. Connecting patterns in these interactions may help explain why practices such as meditation and yoga that rely on rhythmic breathing can help people overcome anxiety-based illnesses.
“We wanted to know why and how fear behavior, controlled breathing, and smell centers of the brain were connected,” Ma said. “What really drives our interest is finding out what we can extrapolate about this relationship to learn about the evolution of behavior and apply this knowledge to help ease the pain associated with such disorders as post-traumatic stress disorder.”
In earlier studies, Ma found that ends of neurons in the nose have odor sensors as well as the ability to detect the rate of breathing. “The nose really does double duty in its function,” Moberly said. “Why and what role does this have in behavior and what does that fear behavior look like in rodents? Their behavioral choices for survival are fight, flight, or freeze.”
To tease apart these overlapping characteristics, Moberly first trained mice by pairing a specific sound with a light foot shock to induce “freezing” in the normally mobile mice. Freezing behavior is a quiescent period that is unusual for scurrying mice. When he plays the sound associated with the foot shock, “trained” mice literally freeze in their tracks.
Other groups have observed that the amygdala and prelimbic prefrontal cortex, which govern learning and memory, emotion, and decision-making, were electrically active during “freezing,” at an average of 4 Hz. Moberly observed that freeze behavior, breathing rate, and electrical activity of these brain regions were coordinated literally on the same wavelength.
Knowing that humans have the ability to voluntarily control the breathing patterns, “now the field is asking, how do we breathe differently in different emotional situations,” Ma said. “Evolutionarily this makes sense. If a mouse in the wild senses danger by smell, for example, it may freeze and slow down breathing as a survival instinct. Now we want to know how we can apply that knowledge to humans. It would be interesting to find out what breathing patterns are most effective in influencing human brain activity and emotional states”
Story Source:
Materials provided by University of Pennsylvania School of Medicine. Note: Content may be edited for style and length.

Path to a new era of microelectronics
A new microchip technology capable of optically transferring data could solve a severe bottleneck in current devices by speeding data transfer and reducing energy consumption by orders of magnitude, according to an article published in the April 19, 2018 issue of Nature.
Researchers from Boston University, Massachusetts Institute of Technology, the University of California Berkeley and University of Colorado Boulder have developed a method to fabricate silicon chips that can communicate with light and are no more expensive than current chip technology. The result is the culmination of a several-year-long project funded by the Defense Advanced Research Project Agency that was a close collaboration between teams led by Associate Professor Vladimir Stojanovic of UC Berkeley, Professor Rajeev Ram of MIT, and Assistant Professor Milos Popovic from Boston University and previously CU Boulder. They collaborated with a semiconductor manufacturing research team at the Colleges of Nanoscale Science and Engineering (CNSE) of the State University of New York at Albany.
The electrical signaling bottleneck between current microelectronic chips has left light communication as one of the only options left for further technological progress. The traditional method of data transfer-electrical wires-has a limit on how fast and how far it can transfer data. It also uses a lot of power and generates heat. With the relentless demand for higher performance and lower power in electronics, these limits have been reached. But with this new development, that bottleneck can be solved.
“Instead of a single wire carrying 10 to 100 gigabits per second, you can have a single optical fiber carrying 10 to 20 terabits per second — so about a thousand times more in the same footprint,” says Popovic.
“If you replace a wire with an optical fiber, there are two ways you win,” he says. “First, with light, you can send data at much higher frequencies without significant loss of energy as there is with copper wiring. Second, with optics, you can use many different colors of light in one fiber and each one can carry a data channel. The fibers can also be packed more closely together than copper wires can without crosstalk.”
In the past, progress to integrate a photonic capability onto state-of-the-art chips that are used in computers and smartphones was hindered by a manufacturing roadblock. Modern processors are enabled by highly developed industrial semiconductor manufacturing processes capable of stamping out a billion transistors that work together on one chip. But these manufacturing processes are finely tuned and designing an approach to include optical devices on chips while keeping the current electrical capabilities intact proved difficult.
The first major success in overcoming this roadblock was in 2015 when the same group of researchers published another paper in Nature that solved this problem, but did so in a limited commercially relevant setting. The paper demonstrated the world’s first microprocessor with a photonic data transfer capability and the approach to manufacturing it without changing the original manufacturing process-a concept the researchers have termed a zero-change technology. Ayar Labs, Inc., a startup that Ram, Popovic and Stojanovic co-founded, has recently partnered with major semiconductor industry manufacturer GlobalFoundries to commercialize this technology.
However, this previous approach was applicable to a small fraction of state-of-the-art microelectronic chips that did not include the most prevalent kind, which use a starting material referred to as bulk silicon.
In the new paper, the researchers present a manufacturing solution applicable to even the most commercially widespread chips based on bulk silicon, by introducing a set of new material layers in the photonic processing portion of the silicon chip. They demonstrate that this change allows optical communication with no negative impact on electronics. By working with state-of-the-art semiconductor manufacturing researchers at CNSE Albany to develop this solution, the scientists ensured that any process that was developed could be seamlessly inserted into current industry-level manufacturing.
“By carefully investigating and optimizing the properties of the additional material layers for photonic devices, we managed to demonstrate state-of-the-art system-level performance in terms of bandwidth density and energy consumption while starting from a much less expensive process compared to competing technologies,” says Fabio Pavanello, a former postdoctoral associate from Popovic’s research group who is a co-first author of the paper with both Amir Atabaki, a research scientist at MIT, and Sajjad Moazeni, a graduate student at UC Berkeley. “It took a major collaboration over several years by our three groups across different disciplines to achieve this result,” adds Atabaki.
The new platform, which brings photonics to state-of-the-art bulk silicon microelectronic chips, promises faster and more energy efficient communication that could vastly improve computing and mobile devices. Applications beyond traditional data communication include accelerating the training of deep-learning artificial neural networks used in image and speech recognition tasks, and low-cost infrared LIDAR sensors for self-driving cars, smartphone face identification and augmented reality technology. In addition, optically enabled microchips could enable new types of data security and hardware authentication, more powerful chips for mobile devices operating on 5th generation (5G) wireless networks, and components for quantum information processing and computing.
“For the most advanced current state-of-the-art and future semiconductor manufacturing technologies with electronic transistor dimensions below 20nm, there is no other way to integrate photonics than this approach.,” concluded Vladimir Stojanovic, whose team led some of the work, “All of the material layers used to form transistors become too thin to support photonics, so the additional layers are needed.”

Alfie Evans case: Supreme Court rules against parents for second time
The court has also refused permission for the parents of the terminally ill toddler to appeal.
Students learn Italian playing Assassin’s Creed video game
In a paper published in Profession, the Modern Language Association’s journal about modern languages and literatures, a Saint Louis University professor discusses how he uses video games to teach Italian, allowing his students to master two semesters worth of language acquisition through one intensive class for students new to the Italian language.
Simone Bregni, Ph.D., associate professor of languages, literatures and cultures at SLU, started playing video games in 1975 when he was 12. By the mid-1980s, he was playing textual adventures, and soon realized his English was improving rapidly as he played. This revelation informed his research and teaching, as did his work for a leading Italian video game publication in the 1990s where he wrote a column on the history of video games and served as a correspondent reporting about the video game industry.
Bregni first began incorporating video games in the classroom in language labs in 1997. It was the introduction of a new generation of animated, interactive adventure games in 2009, however, that brought striking results to his students. Set in fully inhabitable environments, they enriched both language and culture.
“Games have now evolved,” Bregni said. “They are interactive movies.”
Though Bregni has used Final Fantasy, Trivial Pursuit, Who Wants to be a Millionaire, Heavy Rain and Rise of the Tomb Raider in his classrooms, one of the most useful games to teach Italian is Assassin’s Creed II.
“In my Italian Renaissance literature course, for example, students explore Florence as it flourished under the Medici by playing Assassin’s Creed II,” Bregni says in the paper. “My 21st-century American students partake in the life of Ezio Auditore, a 20-something man from an affluent family, by wandering around a cultural and historical re-creation of 1476 Florence.”
Bregni uses games to reinforce vocabulary and grammar, introduce cultural data and teach students to problem solve in Italian. He links specific game chapters to pedagogical goals, preparing students with vocabulary and grammar worksheets, applying them in the relevant game, and discussing and reflecting on them afterwards in a written exercise, a process he calls Identify, Acquire, Create (IAC).
Recently, Bregni received a fellowship grant from SLU’s Reinert Center for Transformative Teaching and Learning to use a state-of-the-art learning studio to develop a language course based entirely on gaming.
In a class called Intensive Italian for Gamers, all students made progress equal to two semesters of Italian over the course of a single fall semester. By the final, students were 3 to 5 points ahead of students in a traditional Italian course.
The class format was a hybrid with a flipped classroom and online instruction. On a typical day, Bregni led 30 minutes of traditional instruction, such as exercises to practice past tenses, for example, followed by 20 minutes of gaming.
“Studies indicate that a strong shared interest within a learning group will foster language acquisition,” Bregni said. “We start with things that students know and can figure out, which is reassuring, and we build from there.”
“I firmly believe that learning should be fun,” Bregni said. “The fact that it is fun doesn’t take away from the seriousness — it’s just more effective.”
The Reinert Center and the language learning studio of the Department of Languages, Literatures and Cultures now have games that can be played in multiple languages, including Italian, French, Spanish, Russian and Chinese so that instructors and students can supplement their course work.
This semester, Bregni is conducting workshops about gaming and language acquisition at universities in several cities across Europe, including Saint Louis University’s Madrid campus. In 2017 Bregni was awarded the the James H. Korn Scholarship of Teaching and Learning Award by the Reinert Center at Saint Louis University.
Story Source:
Materials provided by Saint Louis University. Original written by Carrie Bebermeyer. Note: Content may be edited for style and length.

Remote-control shoots laser at nano-gold to turn on cancer-killing immune cells
A remote command could one day send immune cells on a rampage against a malignant tumor. The ability to mobilize, from outside the body, targeted cancer immunotherapy inside the body has taken a step closer to becoming reality.
Bioengineers at the Georgia Institute of Technology have installed a heat-sensitive switch into T-cells that can activate the T-cells when heat turns the switch on. The method, tested in mice and published in a new study, is locally targeted and could someday help turn immunotherapy into a precision instrument in the fight against cancer.
Immunotherapy has made headlines with startling high-profile successes like saving former U.S. President Jimmy Carter from brain cancer. But the treatment, which activates the body’s own immune system against cancer and other diseases, has also, unfortunately, proved to be hit-or-miss.
“In patients where radiation and traditional chemotherapies have failed, this is where T-cell therapies have shined, but the therapy is still new,” said principal investigator Gabe Kwong. “This study is a step toward making it even more effective.”
Laser, gold, and T-cells
In the study, Kwong’s team successfully put their remote-control method through initial tests in mice with implanted tumors (so-called tumor phantoms, specially designed for certain experiments). The remote works via three basic components.
First, the researchers modified T-cells, a type of white blood cell, to include a genetic switch that, when switched on, increased the cells’ expression of specific proteins by more than 200 times. That ability could be used to guide T-cells’ cancer-fighting activities.
The T-cells, with the switch off, were introduced into the tumor phantom which was placed into the mice. The tumor phantom also included gold nanorods, just dozens of atoms in size. The researchers shone pulses of a gentle laser in the near-infrared (NIR) range from outside the mouse’s body onto the spot where the tumor was located.
The nanorods receiving the light waves turned them into useful, localized mild heat, allowing the researchers to precisely warm the tumor. The elevated heat turned on the T-cells’ engineered switch.
Hyper-activated T-cells
This study honed the method and confirmed that its components worked in living animals. It was not the intention of the study to treat cancer yet, although undertaking that is the next step, which is already on its way.
“In upcoming experiments, we are implementing this approach to treat aggressive tumors and establish cancer-fighting effectiveness,” said Kwong, who is an assistant professor in the Wallace H. Coulter Department of Biomedical Engineering at Georgia Tech and Emory University.
The researchers published their results in the current edition of the journal ACS Synthetic Biology. The study’s first author was graduate research assistant Ian Miller. The research was funded by the National Institutes of Health, the National Science Foundation, the Burroughs Wellcome Fund, and the Shurl and Kay Curci Foundation.
Better immunotherapy
Bioengineers have been able to do a lot with T-cells already when they’re outside of the body.
“Right now, we’re adept at harvesting a patient’s own T-cells, modifying to target cancer, growing them outside the body until there are hundreds of millions of them,” Kwong said. “But as soon as we inject them back into a patient, we lose control over the T-cells’ activity inside the body.”
Cancer is notoriously wily, and when T-cells crawl into a tumor, the tumor tends to switch off the T-cells’ cancer-killing abilities. Researchers have been working to switch them back on.
Kwong’s remote control has done this in the lab, while also boosting T-cell activity.
T-cell toxicities
Having an off-switch is also important. If T-cells were engineered to be always-on and hyper-activated, as they moved through the body, they could damage healthy tissue.
“There would be off-target toxicities, so you really want to pinpoint their activation,” Kwong said. “Our long-term goal for them is to activate site-specifically, so T-cells can overcome immunosuppression by the tumor and become better killers there.”
When the heat remote is turned off, so are Kwong’s engineered T-cells, because customary body temperatures are not high enough to activate their switch.
Heat-shock switch
The switch is a natural safety mechanism in human cells that has evolved to protect against heat shock and turns on when tissue temperatures rise above the body’s normal operating range, which centers on 37 degrees Celsius (98.6 F). But the researchers re-fitted T-cells with the switch to make it turn on other functions, and it could be used to hyper-activate the cells.
The Georgia Tech bioengineers found that the switch worked in a range of 40 to 42 degrees Celsius (104 — 107.6 F), high enough to not react to the majority of high fevers and low enough to not damage healthy tissue nor the engineered T-cells.
“When the local temperature is raised to 45 degrees (113 F), some cells in our body don’t like it,” Kwong said. “But if heating is precisely controlled in a 40 to 42 degrees window with short pulses of the NIR light, then it turns on the T-cells’ switch, and body cells are still very comfortable.”
Immuno-goals and dreams
The researchers want to combine the switch with some additional cancer-fighting weapons they envision engineering into T-cells.
For example, secreted molecules called cytokines can boost immune cells’ ability to kill cancer, but cytokines, unfortunately, can also be toxic. “Our long-term goal is to engineer T-cells to make and release powerful immune system stimulants like cytokines on command locally and sparingly,” Kwong said.
In other studies, gently heated gold nanorods have been shown to kill tumors or hinder metastasis. But T-cell treatments could be even more thorough and, in addition, hopefully, one day give patients treated with them a long-lasting memory immune response to any recurrence of their cancer.

Rare earth magnet recycling is a grind — this new process takes a simpler approach
A new recycling process developed at the U.S. Department of Energy’s Critical Materials Institute (CMI) turns discarded hard disk drive (HDD) magnets into new magnet material in a few steps, and tackles both the economic and environmental issues typically associated with mining e-waste for valuable materials.
Ryan Ott, a scientist at Ames Laboratory and a member of the CMI research team, said that with an ever-increasing amount of discarded electronics globally, it made sense to focus on the most ubiquitous source of valuable rare earth magnets in that waste stream — hard disk drives, which have a relatively centralized scrap source.
“There are a lot of ways to go about getting the rare-earth elements out of e-waste, and some of them are very effective, but some create unwanted by-products and the recovered elements still need to be incorporated into a new application,” said Ott. “Here we have eliminated as many processing steps as we can, and go straight from the discarded magnet to an end product, which is a new magnet.”
Scrapped HDD magnets are collected, then any protective coatings are removed. The magnets are crushed into powder, which is then deposited on a substrate using plasma spray to synthesize coatings ½ to 1 mm thick. The properties of the end product are customizable depending on processing controls.
While the new magnetic material cannot retain the exceptional magnetic properties of the original material, it potentially fills market needs for an economical choice where the performance of a high-strength rare-earth magnet is not required, but lower performance magnets like ferrites are not sufficient.
The method is also an efficient way to produce strong magnets for small places, like sleek hand-held electronics.
“This waste reduction aspect of this process is really two-fold; we’re not only reusing end-of-life magnets,” said Ott. “We are also reducing the amount of manufacturing waste produced in making thin and small geometry magnets out of larger bulk materials.”
Story Source:
Materials provided by DOE/Ames Laboratory. Note: Content may be edited for style and length.

Structured light and nanomaterials open new ways to tailor light at the nanoscale
What happens when you excite novel assemblies of nanomaterials using structured light? Joint research between Tampere University of Technology (TUT) (Finland) and University of Tübingen (Germany) has shown that carefully structured light and matching arrangements of metal nanostructures (so-called “plasmonic oligomers”) can be combined to alter the properties of the generated light at the nanometer scale. In particular, the teams have shown that the efficiency of nonlinear optical fields (e.g., second-harmonics) generated from the oligomers is strongly influenced by how the constituents of the oligomer are arranged in space and how these constituents are illuminated by structured light.
Nonlinear optical processes provide the basis for important functionalities in photonics, such as frequency conversion of light, generation of ultrashort light pulses, as well as optical processing and manipulation. Further advancement of this field is expected to be fueled by the synthesis of novel nanomaterials with tailorable optical properties and by new approaches for coupling light efficiently into such nanomaterials. For the latter purpose, light beams with unconventional polarizations, so-called structured light, are expected to be crucial.
In order to demonstrate such capabilities, the authors designed and fabricated assemblies of gold nanorods with well-defined dimensions and orientations such that their overall size matches the size of a focused laser beam, i.e., about 1 micron. To investigate the nonlinear response of such plasmonic oligomers, the authors used a novel optical microscopy technique, which is equipped with polarization-structured beams. More specifically, the authors used radially and azimuthally polarized cylindrical vector beams that exhibit non-uniform states-of-polarization across the cross-section of the beam.
“Previous works on nonlinear optical effects in plasmonic oligomers have been based on using plane waves or focused beams with homogenous, i.e., uniform, states of polarizations. Here, we used a nonlinear optical microscope equipped with doughnut-shaped polarization-structured beams to study such oligomers. We found that the overall efficiency of nonlinear optical effects from these structures is strongly affected by the spatial structure of the beam and collective interactions supported by the oligomer. We hope that our work will further spark interest in studying and manipulating nonlinear optical effects in novel nanoscale systems using unconventional excitation beams.” says Dr. Godofredo Bautista, postdoctoral researcher at the Nonlinear Optics Group of the Laboratory of Photonics at TUT and co-corresponding author of the work.
Professor Martti Kauranen, head of the Nonlinear Optics Group and Laboratory of Photonics, who supervised the research at TUT, states that “Beyond the nonlinear effects studied in the present work, our results show in general how important it is to tailor the incident optical beam in order to couple light efficiently into complex nanostructures.”
Professor Monika Fleischer, head of the Plasmonic Nanostructures Group at the University of Tübingen and co-corresponding author, who supervised the research at the University of Tübingen, adds: “Nanotechnology provides high-precision tools that allow us to tailor arrangements of metallic nanostructures, also called optical antennas, with pre-designed properties. This way specific interactions with non-conventional laser beams can be targeted, and overall signal intensities may be maximized.”
The researchers believe that their results will be useful in the design and implementation of new kinds of optical components and characterization techniques that utilize unconventional optical fields.
Story Source:
Materials provided by Academy of Finland. Note: Content may be edited for style and length.

Health24.com | Does mom’s dagga end up in breast milk?
Breastfeeding has known benefits for both baby and mom, but if a new mom also smokes marijuana, does the drug turn up in her breast milk?
Yes, says new research. But the exact consequences of the small amount of marijuana that makes it to a baby aren’t yet clear.
Concern for the developing brain
“This study is just a start to see if marijuana transferred into breast milk. Levels in milk were quite low,” said senior study author Thomas Hale, director of the Infant Risk Center at Texas Tech University School of Medicine in Amarillo.
The study was published in the journal Obstetrics and Gynecology.
The researchers also don’t know if the levels of dagga in breast milk would rise if a woman smokes more.
Still, study co-author Dr Teresa Baker, co-director of the Infant Risk Center at Texas Tech, said, “We do not recommend the use of marijuana. There’s concern for the developing brain exposed to THC [the active component in marijuana].”
Both Hale and Baker said that women should abstain from smoking marijuana while breastfeeding because there’s simply no known safe amount.
Health24’s Cyberdoc also cautions against the use of dagga by breastfeeding mothers. She says that dagga may slow brain and overall development in the baby, and increase the risk of sudden infant death syndrome (SIDS).
Frequent dagga use
The study included eight women who used pot. The women lived in Denver, where recreational marijuana is legal. Their use of marijuana varied, with most using the drug infrequently, although one woman said she’d used it seven to 10 times during the past week.
The women were between two and five months after delivery, and all were exclusively breastfeeding their babies.
The study was done completely anonymously and the researchers never knew who the women were.
The participants picked up a breast milk collection kit at a local community centre. The kit included bottles for collecting breast milk as well as a new glass pipe for smoking marijuana to avoid contamination from past drugs used in a pipe.
‘Most things get into breast milk’
The women were instructed to buy a specific strain of marijuana from a specific pharmacy so that they would all get a consistent dose of THC. The women were asked to stop smoking marijuana for 24 hours prior to smoking for the breast milk test.
After smoking for the test, mothers collected samples of breast milk at one, two and four hours after smoking.
About 2.5% of the amount the mother smoked was found in the breast milk.
Dr Ronald Marino, chief of the division of general paediatrics at NYU Winthrop Hospital in Mineola, New York, reviewed the findings.
“Most things do get into breast milk, and we need to understand this more because we don’t know if there’s a safe exposure level for babies. But it’s probably better not to be exposed,” Marino said.

Marijuana is ‘natural’
“Your baby’s brain is developing so much in the first year of life, you want to give them every chance to have high function. Try to stay as pure as you can when breastfeeding – [avoiding] marijuana, alcohol or even herbal remedies,” he added.
Marino said he didn’t think this would be more of an issue in states with legalised recreational marijuana. “Marijuana has been legalised in many states, but so is alcohol. We know that just because alcohol is legal, it doesn’t mean it’s a reasonable thing to use when pregnant or breastfeeding.”
According to Children’s Colorado neonatologist, Dr Erica Wymore, pregnant and nursing women claim that marijuana helps with nausea and balancing their mood. Many prefer marijuana because they believe it is “natural”.
Both Hale and Baker said more research is necessary because there are still many unanswered questions. This study only looked at inhaled marijuana – what about marijuana that’s eaten? Would heavy users have different levels from occasional users? And the most important question: What exactly is the effect on the baby?
Image credit: iStock
NEXT ON HEALTH24X


