Health24.com | Make these two changes at dinner to avoid gaining weight

If you’re trying to lose weight, you’re probably focusing on what you eat, rather than where and how you eat it. But according to a new Ohio State University study, the structure of your meals may be even more important than how often you eat them.

After surveying more than 12 800 Ohio residents who reported eating at least one family meal in the week before their interview, researchers found that people who never watched television or videos during their meals had 37% lower odds of obesity compared to people who always stayed glued to their screens during dinnertime.

Read more: This diet is ranked #1 in the world – but is it right for you?

What’s more, people who always cooked their meals at home had a 26% lower risk of obesity than people who ate only some or no home-cooked meals. Those who always cooked at home and never ate their meals with their screens blaring had a 47% lower obesity risk, the study found.

While the researchers couldn’t prove a cause-and-effect relationship, past studies suggest that both of these factors can play a significant role in weight control.

Read more: If you can maintain weight loss for a year, it gets easier

For one, plopping down in front of the TV drowns out the sound of your chewing, which may actually cause you to overeat, according to research from Brigham Young and Colorado State universities. (Here are six more reasons you can’t stop eating.)

So tune into your meal instead of the TV, the researchers say. The more you pay attention to your food, the less likely you are to overdo it on your portion sizes.

Plus, people who cook their meals at home typically consume fewer kilojoules, fat and sugar, according to a study from John Hopkins University Bloomberg School of Public Health. You’re less likely to rely on frozen meals and fast food when you go out to eat, too.

Read more: Cooking at home can help you lose weight and drop body fat

So even if you don’t typically spend much time in the kitchen, try easing your way into cooking at home so you know exactly what’s going into your food.

This article was originally published on www.menshealth.com

Image credit: iStock

NEXT ON HEALTH24X

Share Button

Ipswich Hospital reviews policy after Ed Sheeran visit

Singer Ed Sheeran was treated at Ipswich Hospital after he broke his elbow and wrist.

Share Button

Health24.com | How your weight is messing with your sperm

As we’re sure you know, being obese can wreck your health in a number of ways. It can cause high blood pressure (the leading cause of strokes), high cholesterol, diabetes and heart disease. But new research shows it’s messing with your fertility, too.

Read more: Is your sperm healthy and strong, use this checklist to find out

A study in the International Journal of Andrology analysed sperm samples from 1 285 men. They found that men who were clinically obese (this means having a BMI of 30 or higher) had lower volumes of semen, lower sperm counts, lower sperm concentration, lower sperm motility and greater sperm defects.

The scientists believe that the extra weight guys are carrying can disrupt hormone levels, throwing their ratios of testosterone and oestrogen out of whack.

Read more: 8 symptoms that mean your testosterone levels are low 

“The health and reproductive performance of spermatozoa in obese men are more likely to be compromised both qualitatively and quantitatively,” lead author of the study Dr Gottumukkala Ramaraju said in a press release.

“Results from our present data set suggest that efforts focusing on male weight loss before conception are warranted for couples seeking infertility treatment.”

Research has found that losing just 5% of your body weight can improve your health.

Read more: 5 things to do before noon to lose weight

Want to maximise your health? Make sure you’re cutting processed and sugary foods – like cake or white bread – from your diet and getting enough exercise. According to the CDC, you should get two hours and 30 minutes a week of moderate-intensity aerobic activity, or one hour and 15 minutes a week of high-intensity aerobic activity.

Additionally, you should include muscle-building workouts into your routine two or more days a week. Read this strategy of lifting weights to lose weight now.

This article originally appeared on www.menshealth.com

Image credit: iStock

Share Button

If You Have a Seltzer Habit, This Is What You Should Know

For anyone who loves fizzy water, picking out a bottle can be a little tricky. Seltzer, sparkling mineral water, club soda—there are so many types, how do you know what's in what? And are they really as healthy as we think? To find out more about our beloved bubbly, we talked to Atlanta-based nutritionist Marisa Moore, RDN.

 

Is carbonated water as hydrating as flat water?

Yes it is, says Moore. A glass of carbonated water contributes to your daily fluid needs. And it's a great alternative for anyone trying to kick a soda habit: You get the same pleasant fizz without the calories and health risks associated with both regular and diet soda (think weight gain, diabetes, high blood pressure, and heart disease).

RELATED: 10 Reasons to Give Up Diet Soda

Is it true that fizzy water can erode your bones?

Nope, the claim that carbonated water interferes with calcium absorption, thus upping a person's risk of osteoporosis, is just a myth, according to Moore. (Phew!) "There's no good evidence that carbonated water alone harms your bones," she says.

It can, however, have an effect on your teeth. When water is carbonated, carbonic acid forms, lowering its pH. And consuming acidic drinks can cause your tooth enamel to erode, which may lead to sensitivity and cavities. If fizzy water is one of your everyday beverages, check out these 3 ways to protect your teeth.

RELATED: Best and Worst Foods for Your Teeth

What's up with seltzers that taste sweet?

Just because a beverage is clear, fizzy, and has zero calories, that doesn't mean it's carbonated water. There are some diet sodas that are marketed as seltzer even though they contain artificial sweeteners. The only way you can distinguish a fake from the real thing is by taking a peek at the ingredients. If you see that it contains any chemicals like aspartame, it's not carbonated water.

How are the three types of fizzy water different?

Sparkling Mineral Water, sold by brands like San Pellegrino and Perrier, is bottled at the source, which means that it has naturally occurring minerals and carbonation (though San Pellegrino adds some extra fizz). The bubbles are fine and delicate, creating a slight effervescent texture. Mineral water is less acidic than other fizzy waters, but because it's sourced naturally and often imported, it tends to be a little pricer.

Seltzer—which is also called sparkling water—is carbonated artificially, and has bigger, sharper bubbles. It contains no ingredients other than water. But some brands (like Polar, Canada Dry, and Schweppes) sell varieties that are flavored naturally with lemon and lime.

Club Soda is essentially the same as seltzer with a few additions. Ingredients like salt, potassium bicarbonate, and potassium sulfate give club soda its salty, mineral taste. But the distinction in taste is minimal, and many people don't notice it. Look for club soda sold by brands like Schweppes and Canada Dry.

 

 

 

Share Button

A different spin on superconductivity

When you plug in an appliance or flip on a light switch, electricity seems to flow instantly through wires in the wall. But in fact, the electricity is carried by tiny particles called electrons that slowly drift through the wires. On their journey, electrons occasionally bump into the material’s atoms, giving up some energy with every collision.

The degree to which electrons travel unhindered determines how well a material can conduct electricity. Environmental changes can enhance conductivity, in some cases drastically. For example, when certain materials are cooled to frigid temperatures, electrons team up so they can flow uninhibited, without losing any energy at all — a phenomenon called superconductivity.

Now a team of researchers from the University of Maryland (UMD) Department of Physics together with collaborators has seen exotic superconductivity that relies on highly unusual electron interactions. While predicted to occur in other non-material systems, this type of behavior has remained elusive. The team’s research, published in the April 6 issue of Science Advances, reveals effects that are profoundly different from anything that has been seen before with superconductivity.

Electron interactions in superconductors are dictated by a quantum property called spin. In an ordinary superconductor, electrons, which carry a spin of ½, pair up and flow uninhibited with the help of vibrations in the atomic structure. This theory is well-tested and can describe the behavior of most superconductors. In this new research, the team uncovers evidence for a new type of superconductivity in the material YPtBi, one that seems to arise from spin-3/2 particles.

“No one had really thought that this was possible in solid materials,” explains Johnpierre Paglione, a UMD physics professor and senior author on the study. “High-spin states in individual atoms are possible but once you put the atoms together in a solid, these states usually break apart and you end up with spin one-half. “

Finding that YPtBi was a superconductor surprised the researchers in the first place. Most superconductors start out as reasonably good conductors, with a lot of mobile electrons — an ingredient that YPtBi is lacking. According to the conventional theory, YPtBi would need about a thousand times more mobile electrons in order to become superconducting at temperatures below 0.8 Kelvin. And yet, upon cooling the material to this temperature, the team saw superconductivity happen anyway. This was a first sign that something exotic was going on inside this material.

After discovering the anomalous superconducting transition, researchers made measurements that gave them insight into the underlying electron pairing. They studied a telling feature of superconductors — their interaction with magnetic fields. As the material undergoes the transition to a superconductor, it will try to expel any added magnetic field from its interior. But the expulsion is not completely perfect. Near the surface, the magnetic field can still enter the material but then quickly decays away. How far it goes in depends on the nature of the electron pairing, and changes as the material is cooled down further and further.

To probe this effect, the researchers varied the temperature in a small sample of the material while exposing it to a magnetic field more than ten times weaker than the Earth’s. A copper coil surrounding the sample detected changes to the superconductor’s magnetic properties and allowed the team to sensitively measure tiny variations in how deep the magnetic field reached inside the superconductor.

The measurement revealed an unusual magnetic intrusion. As the material warmed from absolute zero, the field penetration depth for YPtBi increased linearly instead of exponentially as it would for a conventional superconductor. This effect, combined with other measurements and theory calculations, constrained the possible ways that electrons could pair up. The researchers concluded that the best explanation for the superconductivity was electrons disguised as particles with a higher spin — a possibility that hadn’t even been considered before in the framework of conventional superconductivity.

The discovery of this high-spin superconductor has given a new direction for this research field. “We used to be confined to pairing with spin one-half particles,” says Hyunsoo Kim, lead author and a UMD assistant research scientist. “But if we start considering higher spin, then the landscape of this superconducting research expands and just gets more interesting.”

For now, many open questions remain, including how such pairing could occur in the first place. “When you have this high-spin pairing, what’s the glue that holds these pairs together?” says Paglione. “There are some ideas of what might be happening, but fundamental questions remain-which makes it even more fascinating.”

Story Source:

Materials provided by University of Maryland. Note: Content may be edited for style and length.

Share Button

Reclassify cancers to improve treatment, researchers say

Cancers should be classed by similarities in tumour types, not by where they are formed, a study says.

Share Button

Thermoelectric nanodevice based on Majorana fermions is proposed

In March 1938, the young Italian physicist Ettore Majorana disappeared mysteriously, leaving his country’s scientific community shaken. The episode remains unexplained, despite Leonardo Scascia’s attempt to unravel the enigma in his book The Disappearance of Majorana (1975).

Majorana, whom Enrico Fermi called a genius of Isaac Newton’s stature, vanished a year after making his main contribution to science. In 1937, when he was only 30, Majorana hypothesized a particle that is its own anti-particle and suggested that it might be the neutrino, whose existence had recently been predicted by Fermi and Wolfgang Pauli.

Eight decades later, Majorana fermions, or simply majoranas, are among the objects most studied by physicists. In addition to neutrinos — whose nature, whether or not they are majoranas, is one of the investigative goals of the mega-experiment Dune — another class not of fundamental particles but of quasi-particles or apparent particles has been investigated in the field of condensed matter. These Majorana quasi-particles can emerge as excitations in topological superconductors.

A new study by PhD student Luciano Henrique Siliano Ricco with a scholarship from the São Paulo Research Foundation — FAPESP, in collaboration with his supervisor Antonio Carlos Ferreira Seridonio and others, was conducted on the Ilha Solteira campus of São Paulo State University (UNESP) in Brazil and described in an article in Scientific Reports.

“We propose a theoretical device that acts as a thermoelectric tuner — a tuner of heat and charge — assisted by Majorana fermions,” Seridonio said.

The device consists of a quantum dot (QD. QDs are often called “artificial atoms.” In this case, the QD is located between two metallic leads at different temperatures.

The temperature difference is fundamental to allowing thermal energy to flow across the QD. A quasi-one-dimensional superconducting wire — called a Kitaev wire after its proponent, Russian physicist Alexei Kitaev, currently a professor at the California Institute of Technology (Caltech) in the US — is connected to the QD.

In this study, the Kitaev wire was ring- or U-shaped and had two majoranas (η1 and η2) at its edges. The majoranas emerge as excitations characterized by zero-energy modes.

“When the QD is coupled to only one side of the wire, the system behaves resonantly with regard to electrical and thermal conductance. In other words, it behaves like a thermoelectric filter,” said the principal investigator for the FAPESP fellowship.

“I should stress that this behavior as a filter for thermal and electrical energy occurs when the two majoranas ‘see’ each other via the wire, but only one of them ‘sees’ the QD in the connection.”

Another possibility investigated by the researchers involved making the QD “see” the two majoranas at the same time by connecting it to both ends of the Kitaev wire.

“By making the QD ‘see’ more of η1 or η2, i.e., by varying the system’s asymmetry, we can use the artificial atom as a tuner, where the thermal or electrical energy that flows through it is redshifted or blueshifted,” Seridonio said.

This theoretical paper, he added, is expected to contribute to the development of thermoelectric devices based on Majorana fermions.

Share Button

Long NHS waits: My child flew to Turkey for op

Fourteen-year-old girl had to go abroad for spinal surgery because of delays in Northern Ireland.

Share Button

New cellular insights in bone development

Most of us don’t think about our teeth and bones until one aches or breaks. A team of engineers at Washington University in St. Louis looked deep within collagen fibers to see how the body forms new bone and teeth, seeking insights into faster bone healing and new biomaterials.

Young-Shin Jun, professor of energy, environmental & chemical engineering in the School of Engineering & Applied Science and director of the Environmental NanoChemistry Lab, leads a team of experts in nucleation, the initial step in forming a solid phase in a fluid system.

While nucleation of minerals in bone and teeth is not well understood, researchers do know that bone minerals form inside of collagen, the main protein found in skin and other connective tissues. Jun and Doyoon Kim, a doctoral student in her lab, studied how miniscule gaps in collagen’s fiber structure facilitate the nucleation of calcium phosphate, which is necessary for bone formation and maintenance.

The findings, recently published in Nature Communications, provide a new view into the current theory of calcium phosphate nucleation in a confined space.

To observe nucleation in a collagen gap — about 2 nanometers high and 40 nanometers wide — the team studied calcium phosphate nucleation with in situ small-angle X-ray scattering at the Advanced Photon Source in Argonne National Lab. They found that without an inhibitor, nucleation initially took place outside of the collagen gap. When they added an inhibitor, the process occurred mainly within the collagen gap. Jun said the extremely confined space in the collagen gap allows calcium phosphate to form only along the length of the gap and minimizes surface interactions with the gap sidewalls. In other words, the topography of the collagen gap decreases the energy cost and enables nucleation.

“When we understand how new bone forms, we can modulate where it should form,” Jun said. “Previously, we thought that collagen fibrils could serve as passive templates, however, this study confirmed that collagen fibrils play an active role in biomineralization by controlling nucleation pathways and energy barriers. If we can tweak the chemistry and send signals to form bone minerals faster or stronger, that would be helpful to the medical field.”

While this study focused on the biological aspects of nucleation, Jun said an advanced understanding of nucleation in confinement also applies to chemical engineering, materials science and environmental science and engineering.

“Confined space is a somewhat exotic space that we have not explored much, and we are always thinking about new material formation without any limitation of space,” Jun said. “However, there are so many confined spaces, such as pores in geomedia in subsurface environments or in water filtration membranes, where calcium carbonate or calcium sulfate form as scale. This paper is a snapshot of one health aspect, but the new knowledge can be applied broadly to energy systems and water systems.”

Story Source:

Materials provided by Washington University in St. Louis. Note: Content may be edited for style and length.

Share Button

Printed thermo-plasmonic heat patterns for neurological disorder treatment

A KAIST team presented a highly customizable neural stimulation method. The research team developed a technology that can print the heat pattern on a micron scale to enable the control of biological activities remotely.

The researchers integrated a precision inkjet printing technology with bio-functional thermo-plasmonic nanoparticles to achieve a ‘selective nano-photothermal neural stimulation method.’

The research team of Professor Yoonkey Nam at the Department of Bio and Brain Engineering expects this will serve as an enabling technology for personalized precision neuromodulation therapy for patients with neurological disorders.

The nano-photothermal neural stimulation method uses the thermo-plasmonic effect of metal nanoparticles to modulate the activities of neuronal networks. With the thermo-plasmonic effect, metal nanoparticles can absorb specific wavelength of illuminated light to efficiently generate localized heat. The research team discovered the inhibitory behavior of spontaneous activities of neurons upon photothermal stimulation four years ago. Since then, they have developed this technology to control hyperactive behaviors of neurons and neural circuits, which is often found in neurological disorders such as epilepsy.

In order to overcome the limitation on the spatial selectivity and resolution of the previously developed nano-photothermal method, the team adopted an inkjet printing technology to micro pattern the plasmonic nanoparticles (a few tens of microns), and successfully demonstrated that the nano-photothermal stimulation can be selectively applied according to the printed patterns.

The researchers applied a polyelectrolyte layer-by-layer coating method to printing substrates in a way to improve the pattern fidelity and achieve the uniform assembly of nanoparticles. The electrostatic attraction between the printed nanoparticles and the coated printing substrate also helped the stability of the attached nanoparticles. Because the polyelectrolyte coating is biocompatible, biological experiments including cell culture are possible with the technology developed in this work.

Using printed gold nanorod particles in a few tens of microns resolution over a several centimeters area, the researchers showed that highly complex heat patterns can be precisely formed upon light illumination according to the printing image.

Lastly, the team confirmed that the printed heat patterns can selectively and instantaneously inhibit the activities of cultured hippocampal neurons upon near-infrared light illumination. Because the printing process is applicable to thin and flexible substrates, the technology can be easily applied to implantable neurological disorder treatment devices and wearable devices. By selectively applying the heat patterns to only the desired cellular areas, customized and personalized photothermal neuromodulation therapy can be applied to patients.

“The fact that any desired heat patterns can be simply ‘printed’ anywhere broadens the applicability of this technology in many engineering fields. In bioengineering, it can be applied to neural interfaces using light and heat to modulate physiological functions. As another engineering application, for example, printed heat patterns can be used as a new concept of anti-counterfeit applications,” said the principal investigator, Yoonkey Nam at KAIST.

This work, led mainly by Dr. Hongki Kang, was published in ACS Nano on February 5th 2018.

Story Source:

Materials provided by The Korea Advanced Institute of Science and Technology (KAIST). Note: Content may be edited for style and length.

Share Button