Light ‘relaxes’ crystal to boost solar cell efficiency

Some materials are like people. Let them relax in the sun for a little while and they perform a lot better.

A collaboration led by Rice University and Los Alamos National Laboratory found that to be the case with a perovskite compound touted as an efficient material to collect sunlight and convert it into energy.

The researchers led by Aditya Mohite, a staff scientist at Los Alamos who will soon become a professor at Rice; Wanyi Nie, also a staff scientist at Los Alamos, and lead author and Rice graduate student Hsinhan (Dave) Tsai discovered that constant illumination relaxes strain in perovskite’s crystal lattice, allowing it to uniformly expand in all directions.

Expansion aligns the material’s crystal planes and cures defects in the bulk. That in turn reduces energetic barriers at the contacts, making it easier for electrons to move through the system and deliver energy to devices.

This not only improves the power conversion efficiency of the solar cell, but also does not compromise its photostability, with negligible degradation over more than 1,500 hours of operation under continuous one-sun illumination of 100 milliwatts per cubic centimeter.

The research, which appears this week in Science, represents a significant step toward stable perovskite-based solar cells for next generation solar-to-electricity and solar-to-fuel technologies, according to the researchers.

“Hybrid perovskite crystal structures have a general formula of AMX3, where A is a cation, M is a divalent metal and X is a halide,” Mohite said. “It’s a polar semiconductor with a direct band gap similar to that of gallium arsenide.

“This endows perovskites with an absorption coefficient that is nearly an order of magnitude larger than gallium arsenide (a common semiconductor in solar cells) across the entire solar spectrum,” he said. “This implies that a 300-nanometer thick film of perovskites is sufficient to absorb all the incident sunlight. By contrast, silicon is an indirect band gap material that requires 1,000 times more material to absorb the same amount of sunlight.”

Mohite said researchers have long sought efficient hybrid perovskites that are stable in sunlight and under ambient environmental conditions.

“Through this work, we demonstrated significant progress in achieving both of these objectives,” he said. “Our triple-cation-based perovskite in a cubic lattice shows excellent temperature stability at more than 100 degrees Celsius (212 degrees Fahrenheit).”

The researchers modeled and made more than 30 semiconducting, iodide-based thin films with perovskite-like structures: Crystalline cubes with atoms arranged in regular rows and columns. They measured their ability to transmit current and found that when soaked with light, the energetic barrier between the perovskite and the electrodes largely vanished as the bonds between atoms relaxed.

They were surprised to see that the barrier remained quenched for 30 minutes after the light was turned off. Because the films were kept at a constant temperature during the experiments, the researchers were also able to eliminate heat as a possible cause of the lattice expansion.

Measurements showed the “champion” hybrid perovskite device increased its power conversion efficiency from 18.5 percent to 20.5 percent. On average, all the cells had a raised efficiency above 19 percent. Mohite said perovskites used in the study were 7 percent away from the maximum possible efficiency for a single-junction solar cell.

He said the cells’ efficiency was nearly double that of all other solution-processed photovoltaic technologies and 5 percent lower than that of commercial silicon-based photovoltaics. They retained 85 percent of their peak efficiency after 800 hours of continuous operation at the maximum power point, and their current density showed no photo-induced degradation over the entire 1,500 hours.

“This work will accelerate the scientific understanding required to achieve perovskite solar cells that are stable,” Mohite said. “It also opens new directions for discovering phases and emergent behaviors that arise from the dynamical structural nature, or softness, of the perovskite lattice.”

The lead researchers indicated the study goes beyond photovoltaics as it connects, for the first time, light-triggered structural dynamics with fundamental electronic transport processes. They anticipate it will lead to technologies that exploit light, force or other external triggers to tailor the properties of perovskite-based materials.

Co-authors of the paper are research scientist Bo Chen, Rafael Verduzco, an associate professor of chemical and biomolecular engineering and of materials science and nanoengineering, and Pulickel Ajayan, chair of the Department of Materials Science and NanoEngineering, the Benjamin M. and Mary Greenwood Anderson Professor in Engineering and a professor of chemistry, all of Rice; graduate student Reza Asadpour and Muhammad Ashraf Alam, the Jai N. Gupta Professor of Electrical and Computer Engineering, of Purdue University; research scientists Jean-Christophe Blancon, Sergei Tretiak and Wanyi Nie of Los Alamos; research assistant professor Constantinos Stoumpos and Mercouri Kanatzidis, the Charles E. and Emma H. Morrison Professor of Chemistry at Northwestern University; Jacky Even and Olivier Durand, professors of physics at the Institute of Electronics and Telecommunications of Rennes, France, and Joseph Strzalka, a physicist at Argonne National Laboratory.

This work was supported by the Department of Energy’s Office of Energy Efficiency and Renewable Energy and its Basic Energy Sciences office.

Share Button

Coral bleaching threatens the diversity of reef fish

The Great Barrier Reef (GBR) is revered for its kaleidoscope of colour. New international research led by PhD student Laura Richardson of the ARC Centre of Excellence for Coral Reef Studies at James Cook University reveals that coral bleaching events not only whitewash corals, but can also reduce the variety of fish occupying these highly-valued ecosystems.

The study was conducted by researchers at James Cook University and Lancaster University, U.K., who examined 16 reefs off Lizard Island, in the northern section of the GBR. The quantity and types of coral and fish species were surveyed before, during and after the 2016 mass bleaching event caused by a global heatwave.

“The widespread impacts of heat stress on corals have been the subject of much discussion both within and outside the research community. We are learning that some corals are more sensitive to heat-stress than others, but reef fishes also vary in their response to these disturbances,” said lead author Ms Richardson.

“Fish assemblages are significantly impacted by loss of coral cover as a result of bleaching events, and some fishes are more sensitive than others,” said co-author Prof Nick Graham of Lancaster University.

The loss of corals affected some types of fish more than others. Following the bleaching event, researchers recorded a sharp drop in the diversity of fish communities as the mix or species changed.

Fish that are highly dependent on branching corals, such as butterflyfish, declined the most.

“Prior to the 2016 mass bleaching event, we observed significant variation in the number of fish species, total fish abundance and functional diversity among different fish communities. Six months after the bleaching event, however, this variation was almost entirely lost,” said co-author Dr Andrew Hoey of ARC Centre of Excellence for Coral Reef Studies at James Cook University.

“Also known as ‘biotic homogenisation,’ this tendency towards individual and community similarity is increasingly considered one of the most pressing, but largely unrecognised, biodiversity crises faced globally.”

The paper “Mass coral bleaching causes biotic homogenization of reef fish assemblages” is published in Global Change Biology.

Story Source:

Materials provided by ARC Centre of Excellence in Coral Reef Studies. Note: Content may be edited for style and length.

Share Button

Computer system transcribes words users ‘speak silently’

MIT researchers have developed a computer interface that can transcribe words that the user verbalizes internally but does not actually speak aloud.

The system consists of a wearable device and an associated computing system. Electrodes in the device pick up neuromuscular signals in the jaw and face that are triggered by internal verbalizations — saying words “in your head” — but are undetectable to the human eye. The signals are fed to a machine-learning system that has been trained to correlate particular signals with particular words.

The device also includes a pair of bone-conduction headphones, which transmit vibrations through the bones of the face to the inner ear. Because they don’t obstruct the ear canal, the headphones enable the system to convey information to the user without interrupting conversation or otherwise interfering with the user’s auditory experience.

The device is thus part of a complete silent-computing system that lets the user undetectably pose and receive answers to difficult computational problems. In one of the researchers’ experiments, for instance, subjects used the system to silently report opponents’ moves in a chess game and just as silently receive computer-recommended responses.

“The motivation for this was to build an IA device — an intelligence-augmentation device,” says Arnav Kapur, a graduate student at the MIT Media Lab, who led the development of the new system. “Our idea was: Could we have a computing platform that’s more internal, that melds human and machine in some ways and that feels like an internal extension of our own cognition?”

“We basically can’t live without our cellphones, our digital devices,” says Pattie Maes, a professor of media arts and sciences and Kapur’s thesis advisor. “But at the moment, the use of those devices is very disruptive. If I want to look something up that’s relevant to a conversation I’m having, I have to find my phone and type in the passcode and open an app and type in some search keyword, and the whole thing requires that I completely shift attention from my environment and the people that I’m with to the phone itself. So, my students and I have for a very long time been experimenting with new form factors and new types of experience that enable people to still benefit from all the wonderful knowledge and services that these devices give us, but do it in a way that lets them remain in the present.”

The researchers describe their device in a paper they presented at the Association for Computing Machinery’s ACM Intelligent User Interface conference. Kapur is first author on the paper, Maes is the senior author, and they’re joined by Shreyas Kapur, an undergraduate major in electrical engineering and computer science.

Subtle signals

The idea that internal verbalizations have physical correlates has been around since the 19th century, and it was seriously investigated in the 1950s. One of the goals of the speed-reading movement of the 1960s was to eliminate internal verbalization, or “subvocalization,” as it’s known.

But subvocalization as a computer interface is largely unexplored. The researchers’ first step was to determine which locations on the face are the sources of the most reliable neuromuscular signals. So they conducted experiments in which the same subjects were asked to subvocalize the same series of words four times, with an array of 16 electrodes at different facial locations each time.

The researchers wrote code to analyze the resulting data and found that signals from seven particular electrode locations were consistently able to distinguish subvocalized words. In the conference paper, the researchers report a prototype of a wearable silent-speech interface, which wraps around the back of the neck like a telephone headset and has tentacle-like curved appendages that touch the face at seven locations on either side of the mouth and along the jaws.

But in current experiments, the researchers are getting comparable results using only four electrodes along one jaw, which should lead to a less obtrusive wearable device.

Once they had selected the electrode locations, the researchers began collecting data on a few computational tasks with limited vocabularies — about 20 words each. One was arithmetic, in which the user would subvocalize large addition or multiplication problems; another was the chess application, in which the user would report moves using the standard chess numbering system.

Then, for each application, they used a neural network to find correlations between particular neuromuscular signals and particular words. Like most neural networks, the one the researchers used is arranged into layers of simple processing nodes, each of which is connected to several nodes in the layers above and below. Data are fed into the bottom layer, whose nodes process it and pass them to the next layer, whose nodes process it and pass them to the next layer, and so on. The output of the final layer yields is the result of some classification task.

The basic configuration of the researchers’ system includes a neural network trained to identify subvocalized words from neuromuscular signals, but it can be customized to a particular user through a process that retrains just the last two layers.

Practical matters

Using the prototype wearable interface, the researchers conducted a usability study in which 10 subjects spent about 15 minutes each customizing the arithmetic application to their own neurophysiology, then spent another 90 minutes using it to execute computations. In that study, the system had an average transcription accuracy of about 92 percent.

But, Kapur says, the system’s performance should improve with more training data, which could be collected during its ordinary use. Although he hasn’t crunched the numbers, he estimates that the better-trained system he uses for demonstrations has an accuracy rate higher than that reported in the usability study.

In ongoing work, the researchers are collecting a wealth of data on more elaborate conversations, in the hope of building applications with much more expansive vocabularies. “We’re in the middle of collecting data, and the results look nice,” Kapur says. “I think we’ll achieve full conversation some day.”

“I think that they’re a little underselling what I think is a real potential for the work,” says Thad Starner, a professor in Georgia Tech’s College of Computing. “Like, say, controlling the airplanes on the tarmac at Hartsfield Airport here in Atlanta. You’ve got jet noise all around you, you’re wearing these big ear-protection things — wouldn’t it be great to communicate with voice in an environment where you normally wouldn’t be able to? You can imagine all these situations where you have a high-noise environment, like the flight deck of an aircraft carrier, or even places with a lot of machinery, like a power plant or a printing press. This is a system that would make sense, especially because oftentimes in these types of or situations people are already wearing protective gear. For instance, if you’re a fighter pilot, or if you’re a firefighter, you’re already wearing these masks.”

“The other thing where this is extremely useful is special ops,” Starner adds. “There’s a lot of places where it’s not a noisy environment but a silent environment. A lot of time, special-ops folks have hand gestures, but you can’t always see those. Wouldn’t it be great to have silent-speech for communication between these folks? The last one is people who have disabilities where they can’t vocalize normally. For example, Roger Ebert did not have the ability to speak anymore because lost his jaw to cancer. Could he do this sort of silent speech and then have a synthesizer that would speak the words?”

Share Button

Women in NHS paid 23% less than men

Official data covers basic pay of more than one million workers, including doctors, managers and nurses.

Share Button

Health24.com | How many kilojoules are really in a chicken breast?

When it comes to lean proteins, chicken breast is queen. It offers a whopping 31g of protein per serving, without a lot of fat or kilojoules. Bow down, other proteins. Bow down.

Plus, it’s pretty versatile – you can grill it, roast it, toss it over a green salad, shred and put it into tacos or wraps, or even skewer it and smother it in peanut sauce.

Given that you’re eating it all the time, you’ve probably wondered about chicken breast kilojoules. Is it really as good for you as it seems?

How many kilojoules are in a chicken breast?

Here are the nutrition facts for a 100g serving of roasted chicken breast without the skin:

Kilojoules: 690

Protein: 30g

Fat: 4g

Saturated fat: 1g

Carbohydrates: 0g

Fibre: 0g

Sodium: 74mg

Now consider the differences when you keep the skin on:

Kilojoules: 824

Protein: 30g

Fat: 8g

Saturated fat: 2g

Carbohydrates: 0g

Fibre: 0g

Sodium: 71mg

As you can see, keeping the skin on doubles the fat and saturated fat content, but adds a modest number of kilojoules – about 30. One key thing to remember is that these numbers are for a 100g serving. That’s slightly more than half the average chicken breast.

This is what you’ll get for a whole, boneless, skinless chicken breast:

Kilojoules: 1188

Protein: 53g

Fat: 6g

Saturated Fat: 1.7g

Carbohydrates: 0g

Fibre: 0g

Sodium: 127mg

So if you eat the whole thing, you’ll be getting a LOT more protein – but also way more kilojoules and fat. (Fun fact: Chickens have quadrupled in size since the 1950s, according to research published in the journal Poultry Science.)

Chicken breast nutrition

Chicken breast obviously has a ton of protein. But it also offers 6% of your daily value of iron per 100g serving, which helps your body carry oxygen throughout the body and supports immune system function.

Research also shows that consuming chicken breast is associated with a lower risk of being overweight and developing heart disease and diabetes, per a study in the journal Food & Nutrition Research.

The study authors also noted that chicken breast offers an especially concentrated amount of nutrients, including B vitamins and zinc, for women during pregnancy and breastfeeding. (Good to know whether you’re in that stage of life or not)

So rest assured, chicken is not overrated. Now, all you need to do is nail down the healthiest way to make it and you’ll be set for life.

Image credit: iStock 

This article was originally published on www.womenshealthmag.com 

NEXT ON HEALTH24X

Share Button

Health24.com | ‘Doctors told me I had six months to live if they didn’t amputate my leg’

When doctors initially told 65-year-old Florence “Flori” Schikker she had diabetes, this grandmother of 10 went into denial for 27 years.

“I was diagnosed with diabetes 34 years ago and only when I lost my toe, I realised that my diabetes was serious,” she says.

‘I couldn’t handle the pain’

Schikker, a type 2 diabetic, had puss oozing out from underneath her foot, not knowing she had stepped into a drawing pin.

“After the doctor examined my foot, it started festering.”

But soon it was not just her toe that caused problems. Six months after that first loss, she had to have her leg below the knee amputated.

“I couldn’t handle the pain. It was excruciating,” she says. 

She was given six months to live because of her poor lifestyle.

A major contributing factor

“Doctors told me, the only way to survive this fight was to amputate my leg,” Schikker says.  

She acknowledges that she had lived an unhealthy lifestyle for many years. Working in a bank, she did very little exercise and ate fast food and drank Coke on a regular basis.

“If the doctor tells you you’re a diabetic, don’t ignore it. Don’t get to where I am. The sooner you accept things, the better it is for your health.”

Only after her toe was amputated, did she realise the seriousness of diabetes and how her lifestyle was a major contributing factor to her situation.

At peace with the situation

However, Schikker finally accepted her fate as a diabetic after the doctor told her that her leg would have to be amputated.

“I saw it coming. The pain was terrible.

“I could no longer handle it. At this point I was prepared; whatever came had to be.

“Anyone can survive amputation, with the correct mental and family support. It’s important in the progress of the amputee,” she explains.

“I accepted it immediately and so did my family. A week later I got a call from the doctor to come in with my family. I was seated in the middle with various doctors looking at me, but I stopped them and said, ‘I’m fine.’ My children saw that I was at peace with the situation and supported me.”

Schikker is the co-author of two cookbooks and co-presents a cooking show on Via, an Afrikaans channel on DSTV.

Helping others

“I’ve achieved quite a lot in these seven years that I didn’t have my leg.

“I don’t think I would’ve achieved these things if it wasn’t for my foot. I wouldn’t say it’s because of my foot, but if this hadn’t happened to me. I wouldn’t have the outlook on life that I have now,” she continues cheerfully.    

She is now also leading a healthy life. “Having my leg amputated was the best thing I could have done for myself.”

Schikker often spends time with other amputees struggling to deal with their situation. “God gave me my situation to help others,” she maintains.

One of the ladies she counselled told her she helped her tremendously.

“She told me I gave her her life back,” Schikker says, breaking into tears. “Never let your condition determine your situation.”

Image credit: Supply

Share Button

Health24.com | How green tea can help soothe your painful, sensitive teeth

Sensitive teeth can make that ice-cream a little less sweet. But there may be some help in sight for that cold-induced tooth pain: A new material developed with a green tea extract may fight tooth sensitivity, a study in ACS Applied Materials & Interfaces suggests.

Read more: This R10 habit could save you hundreds in dental bills

Tooth sensitivity occurs when a protective coating on the crowns of your teeth called enamel or the layer covering your tooth root called cementum wear away, revealing a bony tissue called dentin. Without the protective coating, heat or cold can reach the nerves inside the tooth, causing hypersensitivity or a sharp pain when you eat something hot or cold.

Preliminary research

Dentists usually use a mineral called nanohydroxyapatite to plug up tubes in the dentin to stop the liquids and food from reaching the nerves. Problem is, the material doesn’t last long, and doesn’t really stand up well to regular brushing or exposure to acid produced by bacteria in your mouth, the researchers said in a statement.

Read more: Why you have bad breath & and how to get rid of it

That’s when the researchers decided to combine a green tea extract called EGCG – which previous studies have shown to fight the bacteria that causes the build-up of cavity-promoting plaque – with nanohydroxyapatite in silica particles, which can stand up to wear and tear.

When they tested the combination on extracted wisdom teeth, they found it plugged up dentin, released ECGC for at least 96 hours, and prevented plaque formation and tooth erosion.

Read more: Is exercise harming your teeth?

This shows that the material may be good candidate to fight both tooth sensitivity and cavities, the researchers say. Still, the research is still very preliminary, and the material isn’t available for use yet.

Originally published on www.menshealth.com 

Image credit: iStock 

NEXT ON HEALTH24X

Share Button

Health24.com | Try this bodybuilder’s top 3 sleeve-busting biceps moves

Though the biceps are a two-headed muscle, most guys have a single-minded focus when it comes to training them. With all the curling that goes on in most gyms, you’d think every gym rat would have prize-winning biceps. But in reality, there’s scarcity in the bulge department.

What Can You Do About It?

One, you can instantly make your arms look a size bigger by wearing a shirt that’s a size smaller. There’s nothing like a “medium” shirt to make your biceps look larger than life. It’s scientifically proven (research pending) and most importantly, it’s a lifestyle.

Two, get schooled in the art of bigger biceps by top natural bodybuilder Julian “The Quad Guy” Smith. Though Smith’s known for having quadriceps that look more like octaceps, he’s also got a beautiful set of twin peaks for biceps.

Read more: How do your biceps measure up? (& how to grow them)

Here are Smith’s three best biceps building moves that you can start using today to bump up those bi’s:

1. Wide-grip barbell curl

Smith calls this move “the squat of the biceps” and claims it should be a staple in your biceps training. Why use a wide-grip with your hands outside of shoulder-width? Because this puts a little more emphasis on the inside or short head of the biceps that’s closest to your chest. Developing this head adds thickness to your arms when viewed from the front.

Smith recommends three to four sets of six to 10 reps, though he even dips into the lower four to six rep range on occasion to really squeeze out every last bit of size and strength gains. In terms of performance pointers, he says one should focus on minimal movement in the upper arm for maximum biceps activation.

Read more: Build sleeve-popping biceps with this spider curl

2. Single-arm concentration curl

With the exception of the Arnold press (a rotational shoulder press credited to the legend of modern bodybuilding), no other exercise was dearer to the heart of the Terminator. And Arnold’s biceps were second to none. Adding this move to your weekly training regimen is a sure-fire way to say goodbye to puny arms. Smith stresses that the “concentration” component of the curl is to have your arm at a dead hang and move only at the elbow joint to complete the movement.

In this way, no other muscles can help and the biceps are completely isolated. Plus, the unique body angle created by being bent over creates peak tension at the top of the move when the muscle is fully contracted. That’s how you start busting sleeves like a savage. “Remember to keep that elbow pointed down and slightly in front of your shoulders,” says Smith. “Imagine that there is a preacher bench pad behind your triceps. This will supercharge the level of biceps stimulation.”

Read more: Strengthen your core, arms & shoulders with the seated upper-body blitz workout

Smith recommends three to four sets of 15 to 20 reps per side, shooting for symmetry in strength and muscular development on each side. He also likes throwing in brief pauses on the contraction from time to time.

“I like to squeeze my biceps as hard as possible on each rep.” It’s kind of like making biceps lemonade, high in muscle protein and low in sugar.

3. Bent-over barbell curl

Smith calls this drill “my favourite hybrid biceps exercise”. Essentially, it combines a traditional barbell curl with the aforementioned concentration curl. “This gives you the meat and potatoes of the classic biceps builder but in a more vulnerable position for maximum contraction,” says Smith.

Smith recommends four sets of eight to 12 reps for beginners. Advanced trainees can use the pyramid method, where you start with a lighter weight for higher reps and bump the weight up and reps down from set to set. And don’t forget to mind your form. “Since you are bent over, make sure to retract your shoulder blades and maintain a flat back position.”

Read more: The 500-rep unloaded barbell challenge

Either hit all three of these moves in a single training session or work them into your weekly routine. Smith guarantees a steady diet of this trifecta will transform your biceps into baseballs.

Image credit: iStock 

Originally published on www.menshealth.com 

NEXT ON HEALTH24X

Share Button

Miscarriage law review praised by mum who lost 20 babies

Salma Mbarouk wants to be able to register the children she lost through miscarriage.

Share Button

Health24.com | SEE: Girl with ‘exorcist syndrome’ screams as if possessed by demons

The information on Health24 is for educational purposes only, and is not intended as medical advice, diagnosis or treatment. If you are experiencing symptoms or need health advice, please consult a healthcare professional. See additional information.

Share Button