Chaos that will keep you warm: Researchers improve heat insulation using deliberate chaos

Powder is extremely well-suited for thermal insulation when there is a jumble of different sized nanoparticles in it. This was discovered by a research group at the University of Bayreuth led by Prof. Dr. Markus Retsch. The scientists were able to determine how the thermal conductivity of powder is influenced by order and chaos in its constituent parts. They have published their findings in the journal Advanced Materials.

The starting point of the research was phototonic crystals that occur naturally in various species of insects. For example, they are responsible for the colourful, glittering appearance of butterflies’ wings. Such crystals are easy to replicate in the laboratory using polymer nanoparticles. They possess a fine, regular, and stable structure. The effect of this well-ordered structure is that it becomes difficult for heat to flow through the crystals. Thermal conductivity is low.

The researchers in Bayreuth have now found out that materials can be produced from such nanoparticles which exhibit a thermal conductivity that is even much lower. These materials are mixtures in powder form: crystalline order is thus replaced with chaos, and the pleasant interplay of colours also ceases. While each particle in the interior of photonic crystals is surrounded by exactly twelve particles in the direct vicinity, the number of directly neighbouring particles in the mixture is inconsistent throughout. Consequently, heat must take circuitous routes, making it all the more difficult to permeate the mixture. Flowing from the warm side to the cold side in a chaotic structure is not as easy for the heat as it is in well-ordered crystals.

To completely clarify these relationships, Prof. Dr. Markus Retsch and his team used a combination of laboratory experiments and computer simulations. This allowed them to examine in detail how the composition of the particle mixture affects the flow of heat. The highest insulation effect is reached by mixing a very large number of small particles with fewer large particles. In addition to the mixing ratio, the difference in size between the two types of particles also plays a crucial role.

“Making reproducible chaos and describing it via simulations is not as easy as it sounds,” explained Prof. Retsch about the challenges of this study. “It was only possible to compare our experimental results with computer simulations because we mixed nanoparticles whose behaviour we can control very well,” he said. In this way, the researchers at the University of Bayreuth were able to gain detailed insights into heat distribution in disordered materials. These findings are highly relevant to many applications, especially in the field of thermal insulation. For example, they can help to improve the thermal insulation performance of bulk powders. However, they also provide valuable clues for technical applications which, conversely, rely on quick and highly controllable heat dissipation. This is the case, for instance, in the optimization of industrial sintering processes in which tiny particles of powder are melted. The key is to precisely regulate the temperature at the melting points, which is possible thanks to improved dissipation.

Story Source:

Materials provided by University of Bayreuth. Note: Content may be edited for style and length.

Share Button

Inherent feminizing effect of germ cells: New insights into sex determination

Nagoya University-led study shows for the first time germ cells have an inherent property to feminize the body in teleost fish, medaka.

The gender of living organisms is determined either by genetic factors and/or by environmental factors. Interestingly, however, a team of researchers led by Nagoya University previously found that the occurrence of more germ cells — biological cells capable of uniting with one from the opposite sex to form a new individual — in female medaka (teleost fish) gonads is essential for female differentiation of gonads. When germ cells are removed in medaka, XX (female) fish show female-to-male sex reversal, while XY (male) fish with excessive germ cells, which is usually associated with egg production, exhibit male-to-female sex reversal.

“This finding implies that, in addition to the most well- known role of germ cells developing into eggs or sperm and produce the next generation, germ cells have a unique and surprising potential to change their surrounding environment,” says Toshiya Nishimura, first author of the current study. “However, the molecular basis of, and the stage of gametogenesis critical for, feminization remain unknown.”

This question set the researchers to delve deeper into the topic. In their latest study, they generated three different medaka mutants to demonstrate that the feminizing effect of germ cells is not a result of the progression of gametogenesis or a sexual fate decision of germ cells. They found the different stages of germ cells in XX mutants have an ability to feminize the gonads, resulting in the formation of gonads with ovarian structures. In addition to normal ovarian development, the increased number of gonocytes (fetal and neonatal germ cells) is sufficient for male-to-female sex reversal in XY medaka.

What these results mean is that the mechanism underlying the feminizing effect of germ cells is activated before the sexual fate decision of germ cells and meiosis, probably by the time of gonocyte formation in medaka. The study was published in PLOS Genetics.

“Our analyses using medaka collectively also suggest that germ cells acquire the feminizing effect before committing to gametogenesis, while male germ cells undergo a quiescent state before the initiation of spermatogenesis,” corresponding author Minoru Tanaka says. “Why do male germ cells need to be quiescent? One possible answer for the biological meaning of the quiescent state of male germ cells may be to prevent the gonad from being feminized until masculinization of somatic cells is established.”

Story Source:

Materials provided by Nagoya University. Note: Content may be edited for style and length.

Share Button

The Bucket List: Seeing things for the last time

Eight-year-old Alexa is going blind and has created a list of things she wants to see before that happens.

Share Button

Health24.com | 8 nipple symptoms that are totally normal

Nipples: Everyone’s got them. But you probably don’t think about them much until they announce, “I’m cold,” get tickled by a partner, or become chafed while long-distance running (hint: petroleum jelly is your friend).

But take a look at those babies in all their glory. After all, it’s important to know what they look like normally so that you’re better able to recognise any changes, says Dr Dana Scott, a gynaecologist at the University of Michigan Von Voigtlander Women’s Hospital.

“There’s a lot of variety, and everyone is a little different,” she says. But nipple symptoms generally fall into one of eight categories (and you can definitely experience more than one at a time).

Figure out which apply to you, and if you notice any sudden or unexplained changes in colour, size, hairiness, pointiness, and tenderness, call your gynae. While shifts are often totally normal reactions to things like ageing, pregnancy, or breastfeeding, they can sometimes tip docs off to hormonal imbalances or, in the most severe cases, serious conditions like cancer – so it’s good to have a handle on what your baseline is.

Inverted nipples

It’s not just belly buttons that come in innies and outies – nipples do, too. And while there’s nothing abnormal about being born with one or two inverted nipples, which often become apparent during puberty, they can make breastfeeding more challenging, Dr Scott says. “Women may need to manipulate the nipple to breastfeed better,” she says.

Most of the concerns around innies, though, are aesthetic, finds Dr Karen Horton, a plastic surgeon in San Francisco who specialises in female cosmetic and reconstructive surgery. “Women say, ‘I just want my nipples to look normal’ or, ‘I want them to look symmetrical,’” since sometimes only one bud is hiding, she says. While inverted nipple-correction procedures – in-office treatments requiring local anaesthesia and about 10 days without exercise – are a thing, doctors don’t love doing on women who still want to have children since it could make breastfeeding even harder. (Note: Piercing your innie in an effort to pop it out usually doesn’t work.)

Whatever you do (or don’t do) with inverted nipples, keep in mind that outies-turned-innies deserve medical attention. “If someone has cancer right under the nipple, that can cause a retraction of the nipple over time,” Dr Scott says. While it could totally be something else, ask your doctor to take a peek if that sounds familiar.

Read more: 5 everyday habits that are causing your boobs to sag

Hairy nipples

Hair varies in colour, thickness, and texture for each person – and that includes the sprouts surrounding nipples. “Many don’t even realise they have hair; some do and hate it or pluck it or shave it,” Horton says. “It’s normal, and there are different degrees of hairiness.” Your level may be influenced by your ethnicity – Indian women, for example, often have more than their Caucasian counterparts. Pregnant women, too, may notice hairs darkening, thickening, or growing, thanks to hormonal shifts.

If you notice changes like this and aren’t pregnant (or going through another hormonal change, like menopause), bring it up to your doctor, Dr Scott recommends. It could signal a hormonal imbalance, she says.

Read more: 11 nipple facts you definitely need in your life

Big areolas

Larger breasts tend to mean larger areolas, says Dr Horton, who often performs “areola reductions” as part of breast lifts or reductions. Your areolas can also grow and darken during pregnancy and breastfeeding, thanks to the same hormonal changes that can deepen the labia’s hue, Dr Scott says.

“It’s natural… and makes it physically easier to breastfeed,” she says. Nothing to worry about unless, again, those colour changes are unexplained.

Extra nipples

Not everyone’s nipple count stops at two – although their functional nipple count does. (In other words, you can’t breastfeed from a third nipple or develop breast cancer there.) “I see 10 accessory nipples a week,” Dr Horton says, noting that women often don’t realise they’re technically nipples since they can look just like pimples, moles, or benign bumps.

Those bonus buds can appear anywhere along “the milk line” – similar to the stretch of nipples on dogs or cows – if a certain gene doesn’t get expressed during development. Most often, they pop up under the left breast (same goes for men) and can even sit atop a bit of breast tissue, Dr Horton says. They’re no big deal medically, but they can be removed pretty easily if they really bother you, she adds.

Read more: Are those random hairs on your nipple normal?

Stretched out nipples

Textbook nipples resemble chickpeas, but some women’s nips – especially those that have been through experiences like, you know, feeding a child – look more like a piece of stretched out toffee.

Sometimes after breastfeeding “the nipple gets really stretched out and it’s three times the size and width of a pencil eraser,” Dr Horton says. Such lanky nipples can seem more prominent on small-chested women, some of whom opt for nipple-reduction procedures on one or both sides. Still, they’re nothing to worry about health-wise if you don’t want to tinker with your nips.

Leaking nipples

Nipples do, of course, have a biological purpose – breastfeeding. But you don’t have to be breastfeeding to be reminded that your nips are sitting on top of fluid-creating ducts. Often, women start lactating a bit when they’re pregnant, and some women leak when they squeeze their buds, Dr Scott says.

Usually, it’s not a medical problem, but discharge is definitely something you should run by your doctor – especially if it’s bloody, only happening on one side, or leaking even when you keep your hands off, Dr Scott says. In rare cases, it could signal cancer.

Read more: What kind of boobs do you have?

Sideways-pointing nipples

If your nipples were headlights, would they illuminate a path forward or highlight the area more in your periphery? Dr Horton calls the latter type “easty-westies” or “side-winders”.

“They are nipples that point out to the sides like sides of a compass,” she says. “This is genetic, and if an implant is put into a breast with sideways-pointing nipples, they will be accentuated.” South-facing nipples are common too, especially as you age or if your weight has fluctuated a lot, Dr Horton says.

Bumpy areolas

The actual nipple isn’t the only protrusion on your breast – women also have bumps called Montgomery glands on their areolas. And for some, they’re especially prominent.

“Some patients come in, and it’s almost like very rocky terrain,” Dr Horton says. Though bumpy beholders may be self-conscious, some texture is totally normal and can’t be altered. After all, those glands have a purpose – to lubricate and make the areola oily, which helps with breastfeeding.

Image credit: iStock 

This article was originally published on www.womenshealthmag.com 

Share Button

Paramedics set to prescribe medicines

Up to seven out of 10 people currently seen by paramedics may need help but not a hospital visit.

Share Button

To prevent collapse of tropical forests, protect their shape

Tropical forests have been called the lungs of the planet. They soak up vast quantities of carbon dioxide, hold the world’s greatest diversity of plants and animals, and employ millions of people. And these hot ecosystems — often a patchwork of trees and grasslands — are being deeply altered by logging and other land use change.

Now, a team of scientists have made a fundamental discovery about how fires on the edges of these forests control their shape and stability. Their study implies that when patches of tropical forest lose their natural shape it could contribute to the sudden, even catastrophic, transformation of that land from trees to grass.

The new knowledge could help protect tropical forests — and allow land managers to build new tools to predict the stability of both individual forest patches and larger regional-scale forests.

The study was published March 26 in the journal Ecology Letters.

LAW OF THE FOREST

Using high-resolution satellite data from protected forests in the savanna region of the Brazilian Cerrado, the scientists found that the shape of these natural forests follow a predictable mathematical relationship between a forest’s perimeter and its area — regardless of its climate region or its size. They call this a “3/4 power law” and it roughly means the forests all tend toward shapes that are neither skinny like a line, nor round and smooth like a circle. “If a forest could grow easily in all directions, we’d expect a circle,” says Laurent Hébert-Dufresne, a computer scientist at the University of Vermont who is the lead author on the new study, “but what we actually see is more dendritic, a bit like an octopus or deformed circle.”

The team of six scientists — that included modelers, ecologists and physicists from UVM, the Santa Fe Institute, Stanford, Boston University, Princeton, and the University of Washington — show that the 3/4 law holds true for tiny forest fragments not much bigger than a basketball court up to large forest patches covering dozens of square miles.

The scientists combined their understanding of real-world data with the results of a new computer model to explain why this happens: fires, that burn easily in the grasslands surrounding forests — and singe the forests’ wet edges — are in constant battle with the forests’ expansive growth out into grasslands. This interplay at the edge between grass and forest, the scientists discovered, creates forest patches that converge on a steady-state shape.

The results of the scientists’ model matched the observed results from real forests in Brazil. And an experiment the scientists ran on their model shows that the fate of forest patches over time — whether they expand or contract — is determined by their initial shape. Those with compact shapes of all sizes, over time, converge on the more octopus-like 3/4-power-scaling relationship*, while those with skinny shapes and larger perimeter-to-area ratios collapsed, disappearing into grasslands or fragmenting into very small patches.

Which means that this relationship between a forest’s perimeter and its area may help predict the stability of individual forest patches. The scientists are optimistic that the study can lead to practical tools that show how far a managed forest patch deviates from this natural geometry will help to determine its stability over time.

STATE CHANGE

And the new research presents insights at a larger, regional scale into the possible fate of Brazil’s forests. “Stepping back and considering the macro scale — not looking at the shape of every patch, but, instead, at the state of the entire system — the model suggests that the collapse from forest to grassland can be dramatic,” says Andrew Berdahl, a researcher at the Santa Fe Institute and the senior author on the study. “These local, small-scale effects — perimeter growth and edge burning — can lead to a critical transition across a whole forest region between a forest-dominated-state and a grass-dominated-state.” And once large areas of forest switch to grass it can be difficult to recover the forests. “It is like stepping off a cliff,” says Berdahl. “You can’t simply step back up.”

Ecologists have historically looked at the elements within a forest to understand its condition — often focusing on its plants and animals — but there has been little exploration of the geometry of forests and how this might matter. The new study shows a powerful role for fire driving the shape of Brazil’s tropical forests, “and we’d now like to see if this pattern holds true in other parts of the world,” says UVM’s Hébert-Dufresne, an assistant professor in the Department of Computer Science and part of UVM’s Complex Systems Center. “Say in Africa we find that elephants pushing over trees changes the equation, or dryness in Australia — that would be very interesting.” And he’d like to expand the research to see whether the relationship observed in the new model — derived from wild forests — holds true in logged and other managed forests in Brazil.

“Our fundamental point though is that a forest’s shape is very important,” he says, “and that its shape is directly related to its stability.”

Story Source:

Materials provided by University of Vermont. Note: Content may be edited for style and length.

Share Button

Is there life adrift in the clouds of Venus?

In the search for extraterrestrial life, scientists have turned over all sorts of rocks.

Mars, for example, has geological features that suggest it once had — and still has — subsurface liquid water, an almost sure prerequisite for life. Scientists have also eyed Saturn’s moons Titan and Enceladus as well as Jupiter’s moons Europa, Ganymede and Callisto as possible havens for life in the oceans under their icy crusts.

Now, however, scientists are dusting off an old idea that promises a new vista in the hunt for life beyond Earth: the clouds of Venus.

In a paper published online today (March 30, 2018) in the journal Astrobiology, an international team of researchers led by planetary scientist Sanjay Limaye of the University of Wisconsin-Madison’s Space Science and Engineering Center lays out a case for the atmosphere of Venus as a possible niche for extraterrestrial microbial life.

“Venus has had plenty of time to evolve life on its own,” explains Limaye, noting that some models suggest Venus once had a habitable climate with liquid water on its surface for as long as 2 billion years. “That’s much longer than is believed to have occurred on Mars.”

On Earth, terrestrial microorganisms — mostly bacteria — are capable of being swept into the atmosphere, where they have been found alive at altitudes as high as 41 kilometers (25 miles) by scientists using specially equipped balloons, according to study co-author David J. Smith of NASA’s Ames Research Center.

There is also a growing catalog of microbes known to inhabit incredibly harsh environments on our planet, including the hot springs of Yellowstone, deep ocean hydrothermal vents, the toxic sludge of polluted areas, and in acidic lakes worldwide.

“On Earth, we know that life can thrive in very acidic conditions, can feed on carbon dioxide, and produce sulfuric acid,” says Rakesh Mogul, a professor of biological chemistry at California State Polytechnic University, Pomona, and a co-author on the new paper. He notes that the cloudy, highly reflective and acidic atmosphere of Venus is composed mostly of carbon dioxide and water droplets containing sulfuric acid.

The habitability of Venus’ clouds was first raised in 1967 by noted biophysicist Harold Morowitz and famed astronomer Carl Sagan. Decades later, the planetary scientists David Grinspoon, Mark Bullock and their colleagues expanded on the idea.

Supporting the notion that Venus’ atmosphere could be a plausible niche for life, a series of space probes to the planet launched between 1962 and 1978 showed that the temperature and pressure conditions in the lower and middle portions of the Venusian atmosphere — altitudes between 40 and 60 kilometers (25-27 miles) — would not preclude microbial life. The surface conditions on the planet, however, are known to be inhospitable, with temperatures soaring above 450 degrees Celsius (860 degrees Fahrenheit).

Limaye, who conducts his research as a NASA participating scientist in the Japan Aerospace Exploration Agency’s Akatsuki mission to Venus, was eager to revisit the idea of exploring the planet’s atmosphere after a chance meeting at a teachers’ workshop with paper co-author Grzegorz S?owik of Poland’s University of Zielona Góra. Slowik made him aware of bacteria on Earth with light-absorbing properties similar to those of unidentified particles that make up unexplained dark patches observed in the clouds of Venus. Spectroscopic observations, particularly in the ultraviolet, show that the dark patches are composed of concentrated sulfuric acid and other unknown light-absorbing particles.

Those dark patches have been a mystery since they were first observed by ground-based telescopes nearly a century ago, says Limaye. They were studied in more detail by subsequent probes to the planet.

“Venus shows some episodic dark, sulfuric rich patches, with contrasts up to 30-40 percent in the ultraviolet, and muted in longer wavelengths. These patches persist for days, changing their shape and contrasts continuously and appear to be scale dependent,” says Limaye.

The particles that make up the dark patches have almost the same dimensions as some bacteria on Earth, although the instruments that have sampled Venus’ atmosphere to date are incapable of distinguishing between materials of an organic or inorganic nature.

The patches could be something akin to the algae blooms that occur routinely in the lakes and oceans of Earth, according to Limaye and Mogul — only these would need to be sustained in the Venusian atmosphere.

Limaye, who has spent his career studying planetary atmospheres, was further inspired to revisit the idea of microbial life in the clouds of Venus by a visit to Tso Kar, a high-altitude salt lake in northern India where he observed the powdery residue of sulfur-fixing bacteria concentrated on decaying grass at the edge of the lake being wafted into the atmosphere.

Limaye notes, however, that a part of the equation that isn’t known is when Venus’ liquid water evaporated — extensive lava flows in the last billion years likely have either destroyed or covered up the planet’s earlier terrestrial history.

In the hunt for extraterrestrial life, planetary atmospheres other than Earth’s remain largely unexplored.

One possibility for sampling the clouds of Venus, says Limaye, is on the drawing board: VAMP, or Venus Atmospheric Maneuverable Platform, a craft that flies like a plane but floats like a blimp and could stay aloft in the planet’s cloud layer for up to a year gathering data and samples.

Such a platform could include instruments like Raman Lidar, meteorological and chemical sensors, and spectrometers, says Limaye. It could also carry a type of microscope capable of identifying living microorganisms.

“To really know, we need to go there and sample the clouds,” says Mogul. “Venus could be an exciting new chapter in astrobiology exploration.”

The Wisconsin scientist and his colleagues remain hopeful that such a chapter can be opened as there are ongoing discussions about possible NASA participation in Russia’s Roscosmos Venera-D mission, now slated for the late 2020s. Current plans for Venera-D might include an orbiter, a lander and a NASA-contributed surface station and maneuverable aerial platform.

This research was supported by NASA grants NNX09AE85G and NNX16AC79G. The VAMP concept is under development by Northrop Grumman Corp.

Share Button

Engineers turn plastic insulator into heat conductor

Plastics are excellent insulators, meaning they can efficiently trap heat — a quality that can be an advantage in something like a coffee cup sleeve. But this insulating property is less desirable in products such as plastic casings for laptops and mobile phones, which can overheat, in part because the coverings trap the heat that the devices produce.

Now a team of engineers at MIT has developed a polymer thermal conductor — a plastic material that, however counterintuitively, works as a heat conductor, dissipating heat rather than insulating it. The new polymers, which are lightweight and flexible, can conduct 10 times as much heat as most commercially used polymers.

“Traditional polymers are both electrically and thermally insulating. The discovery and development of electrically conductive polymers has led to novel electronic applications such as flexible displays and wearable biosensors,” says Yanfei Xu, a postdoc in MIT’s Department of Mechanical Engineering. “Our polymer can thermally conduct and remove heat much more efficiently. We believe polymers could be made into next-generation heat conductors for advanced thermal management applications, such as a self-cooling alternative to existing electronics casings.”

Xu and a team of postdocs, graduate students, and faculty, have published their results today in Science Advances. The team includes Xiaoxue Wang, who contributed equally to the research with Xu, along with Jiawei Zhou, Bai Song, Elizabeth Lee, and Samuel Huberman; Zhang Jiang, physicist at Argonne National Laboratory; Karen Gleason, associate provost of MIT and the Alexander I. Michael Kasser Professor of Chemical Engineering; and Gang Chen, head of MIT’s Department of Mechanical Engineering and the Carl Richard Soderberg Professor of Power Engineering.

Stretching spaghetti

If you were to zoom in on the microstructure of an average polymer, it wouldn’t be difficult to see why the material traps heat so easily. At the microscopic level, polymers are made from long chains of monomers, or molecular units, linked end to end. These chains are often tangled in a spaghetti-like ball. Heat carriers have a hard time moving through this disorderly mess and tend to get trapped within the polymeric snarls and knots.

And yet, researchers have attempted to turn these natural thermal insulators into conductors. For electronics, polymers would offer a unique combination of properties, as they are lightweight, flexible, and chemically inert. Polymers are also electrically insulating, meaning they do not conduct electricity, and can therefore be used to prevent devices such as laptops and mobile phones from short-circuiting in their users’ hands.

Several groups have engineered polymer conductors in recent years, including Chen’s group, which in 2010 invented a method to create “ultradrawn nanofibers” from a standard sample of polyethylene. The technique stretched the messy, disordered polymers into ultrathin, ordered chains — much like untangling a string of holiday lights. Chen found that the resulting chains enabled heat to skip easily along and through the material, and that the polymer conducted 300 times as much heat compared with ordinary plastics.

But the insulator-turned-conductor could only dissipate heat in one direction, along the length of each polymer chain. Heat couldn’t travel between polymer chains, due to weak Van der Waals forces — a phenomenon that essentially attracts two or more molecules close to each other. Xu wondered whether a polymer material could be made to scatter heat away, in all directions.

Xu conceived of the current study as an attempt to engineer polymers with high thermal conductivity, by simultaneously engineering intramolecular and intermolecular forces — a method that she hoped would enable efficient heat transport along and between polymer chains.

The team ultimately produced a heat-conducting polymer known as polythiophene, a type of conjugated polymer that is commonly used in many electronic devices.

Hints of heat in all directions

Xu, Chen, and members of Chen’s lab teamed up with Gleason and her lab members to develop a new way to engineer a polymer conductor using oxidative chemical vapor deposition (oCVD), whereby two vapors are directed into a chamber and onto a substrate, where they interact and form a film. “Our reaction was able to create rigid chains of polymers, rather than the twisted, spaghetti-like strands in normal polymers.” Xu says.

In this case, Wang flowed the oxidant into a chamber, along with a vapor of monomers — individual molecular units that, when oxidized, form into the chains known as polymers.

“We grew the polymers on silicon/glass substrates, onto which the oxidant and monomers are adsorbed and reacted, leveraging the unique self-templated growth mechanism of CVD technology,” Wang says.

Wang produced relatively large-scale samples, each measuring 2 square centimeters — about the size of a thumbprint.

“Because this sample is used so ubiquitously, as in solar cells, organic field-effect transistors, and organic light-emitting diodes, if this material can be made to be thermally conductive, it can dissipate heat in all organic electronics,” Xu says.

The team measured each sample’s thermal conductivity using time-domain thermal reflectance — a technique in which they shoot a laser onto the material to heat up its surface and then monitor the drop in its surface temperature by measuring the material’s reflectance as the heat spreads into the material.

“The temporal profile of the decay of surface temperature is related to the speed of heat spreading, from which we were able to compute the thermal conductivity,” Zhou says.

On average, the polymer samples were able to conduct heat at about 2 watts per meter per kelvin — about 10 times faster than what conventional polymers can achieve. At Argonne National Laboratory, Jiang and Xu found that polymer samples appeared nearly isotropic, or uniform. This suggests that the material’s properties, such as its thermal conductivity, should also be nearly uniform. Following this reasoning, the team predicted that the material should conduct heat equally well in all directions, increasing its heat-dissipating potential.

Going forward, the team will continue exploring the fundamental physics behind polymer conductivity, as well as ways to enable the material to be used in electronics and other products, such as casings for batteries, and films for printed circuit boards.

“We can directly and conformally coat this material onto silicon wafers and different electronic devices” Xu says. “If we can understand how thermal transport [works] in these disordered structures, maybe we can also push for higher thermal conductivity. Then we can help to resolve this widespread overheating problem, and provide better thermal management.”

This research was supported, in part, by the U.S. Department of Energy — Basic Energy Sciences and the MIT Deshpande Center.

Share Button

Cat-like ‘hearing’ with device tens of trillions times smaller than human eardrum

Case Western Reserve University researchers achieve cat-like ‘hearing’ with device 10,000,000,000,000 times smaller than human eardrum.

Researchers at Case Western Reserve University are developing atomically thin “drumheads” able to receive and transmit signals across a radio frequency range far greater than what we can hear with the human ear.

But the drumhead is tens of trillions times (10 followed by 13 zeros) smaller in volume and 100,000 times thinner than the human eardrum.

The advances will likely contribute to making the next generation of ultralow-power communications and sensory devices smaller and with greater detection and tuning ranges.

“Sensing and communication are key to a connected world,” said Philip Feng, an associate professor of electrical engineering and computer science and corresponding author on a paper about the work published March 30 in the journal Science Advances. “In recent decades, we have been connected with highly miniaturized devices and systems, and we have been pursuing ever-shrinking sizes for those devices.”

The challenge with miniaturization: Also achieving a broader dynamic range of detection, for small signals, such as sound, vibration, and radio waves.

“In the end, we need transducers that can handle signals without losing or compromising information at both the ‘signal ceiling’ (the highest level of an undistorted signal) and the ‘noise floor’ (the lowest detectable level),” Feng said.

While this work was not geared toward specific devices currently on the market, researchers said, it was focused on measurements, limits and scaling which would be important for essentially all transducers.

Those transducers may be developed over the next decade, but for now, Feng and his team have already demonstrated the capability of their key components-the atomic layer drumheads or resonators-at the smallest scale yet.

The work represents the highest reported dynamic range for vibrating transducers of their type. To date, that range had only been attained by much larger transducers operating at much lower frequencies-like the human eardrum, for example.

“What we’ve done here is to show that some ultimately miniaturized, atomically thin electromechanical drumhead resonators can offer remarkably broad dynamic range, up to ~110dB, at radio frequencies (RF) up to over 120MHz,” Feng said. “These dynamic ranges at RF are comparable to the broad dynamic range of human hearing capability in the audio bands.”

New dynamic standard

Feng said the key to all sensory systems-from naturally occurring sensory functions in animals to sophisticated devices in engineering-is that desired dynamic range.

Dynamic range is the ratio between the signal ceiling over the noise floor and is usually measured in decibels (dB).

Human eardrums normally have dynamic range of about 60 to 100dB in the range of 10Hz to 10kHz, and our hearing quickly decreases outside this frequency range. Other animals, such as the common house cat or beluga whale (see illustration), can have comparable or even wider dynamic ranges in higher frequency bands.

The vibrating nanoscale drumheads developed by Feng and his team are made of atomic layers of semiconductor crystals (single-, bi-, tri-, and four-layer MoS2 flakes, with thickness of 0.7, 1.4, 2.1, and 2.8 nanometers), with diameters only about 1 micron.

They construct them by exfoliating individual atomic layers from the bulk semiconductor crystal and using a combination of nanofabrication and micromanipulation techniques to suspend the atomic layers over micro-cavities pre-defined on a silicon wafer, and then making electrical contacts to the devices.

Further, these atomically thin RF resonators being tested at Case Western Reserve show excellent frequency “tunability,” meaning their tones can be manipulated by stretching the drumhead membranes using electrostatic forces, similar to the sound tuning in much larger musical instruments in an orchestra, Feng said.

The study also reveals that these incredibly small drumheads only need picoWatt (pW, 10^-12 Watt) up to nanoWatt (nW, 10^-9 Watt) level of RF power to sustain their high frequency oscillations.

“Not only having surprisingly large dynamic range with such tiny volume and mass, they are also energy-efficient and very ‘quiet’ devices,” Feng said, “We ‘listen’ to them very carefully and ‘talk’ to them very gently.”

The paper’s co-authors were: Jaesung Lee, a Case Western Reserve post-doctoral research associate; Max Zenghui Wang, a former research associate now at the University of Electronic Science and Technology of China (UESTC), Chengdu, China; Keliang He, a former graduate student in physics, now a senior engineer at Nvidia; Rui Yang, a former graduate student and now a post-doctoral scholar at Stanford University; and Jie Shan, a former physics professor at Case Western Reserve now at Cornell University.

The work has been financially supported by the National Academy of Engineering Grainger Foundation Frontiers of Engineering Award (Grant: FOE 2013-005) and the National Science Foundation CAREER Award (Grant: ECCS-1454570).

Share Button

Microengineered slippery rough surface for water harvesting from air

A slippery rough surface (SRS) inspired by both pitcher plants and rice leaves outperforms state-of-the-art liquid-repellent surfaces in water harvesting applications, according to a team of researchers at Penn State and the University of Texas at Dallas.

The team reports their work online today (March 30) in Science Advances, an open-access journal.

“With an estimated 4 billion people living in a situation of water scarcity during at least some part of the year, an inexpensive method for harvesting water from water vapor or from fog droplets in air could have enormous practical applications, and will help alleviate the water scarcity issues in many regions of the world,” said the project’s leader, Tak-Sing Wong, who is the Wormley Family Early Career Professor in Engineering and assistant professor of mechanical engineering, Penn State.

Many water-harvesting technologies are not as efficient, because when water is attracted to a hydrophilic surface, the water tends to form a sheet and clings to the surface, making it hard to remove. But Wong’s post-doctoral scholar, Simon Dai, now an assistant professor at UT Dallas, was looking at combining different biological strategies to create a slippery solution for water harvesting.

“With SRS, we combined the slippery interface of a pitcher plant with the surface architecture of a rice leaf, which has micro/nanoscale directional grooves on its surface that allows water to be removed very easily in one direction but not the other,” said Dai.

Dai developed a pitcher plant-inspired slippery surface with hydrophilic chemistry. At the same time, he added the directional grooves and gave the new surface a microscale roughness that increased the surface area. The rate of water and fog harvesting are directly proportional to the amount of surface area on which droplets can form. The rice leaf-inspired grooves whisk the water droplets away through capillary action or gravity.

Through experiments carried out at Penn State, the team showed that these surfaces can collect tiny water droplets from air at a rate faster than many state-of-the-art surfaces. Molecular dynamics simulations carried out at UT Dallas by Dai’s colleague, Steven Nielson, explained why the hydrophilic surface was particularly good at water harvesting.

“If the SRS material is produced at scale, we estimate that we can collect over 120 liters of water per square meter of the surface per day, and we can further increase the water harvesting rate by optimizing the SRS,” said Nan Sun, graduate student in Wong’s group and coauthor of the paper, titled “Hydrophilic Directional Rough Surfaces for Water Harvesting.”

Wong’s team is currently working on optimizing and scaling up the SRS with the goal to create highly efficient water harvesting systems for providing clean water in water scarcity regions.

Others on the project from Penn State are graduate students Birgitt Boschitsch Stogin and Jing Wang; and former post-doctoral scholar in Wong’s lab, Shikuan Yang, now a professor at Zhejiang University. The researchers have filed a U.S. provisional patent for this work.

The National Science Foundation, Advanced Research Projects Agency-Energy, the Office of Naval Research, Covestro LLC, and the Materials Research Institute at Penn State supported this work.

Story Source:

Materials provided by Penn State. Original written by Walt Mills. Note: Content may be edited for style and length.

Share Button