Specifically, the finding took place during a research stay of the expert Stefano Torniamenti at the ICCUB, one of the research units that make up the IEEC.

Black holes in the Hyades star cluster?

Since their discovery, black holes have been one of the most mysterious and fascinating phenomena in the Universe and have become the object of study for researchers all over the world. This is particularly true for small black holes because they have been observed during the detection of gravitational waves. Since the detection of the first gravitational waves in 2015, experts have observed many events that correspond to mergers of low-mass black hole pairs.

For the published study, the team of astrophysicists used simulations that track the motion and evolution of all the stars in the Hyades — located at a distance from the Sun of about 45 parsecs or 150 light-years — to reproduce their current state.

Open clusters are loosely bound groups of hundreds of stars that share certain properties such as age and chemical characteristics. The simulation results were compared with the actual positions and velocities of the stars in the Hyades, which are now known precisely from observations made by the European Space Agency’s (ESA) Gaia satellite.

“Our simulations can only simultaneously match the mass and size of the Hyades if some black holes are present at the centre of the cluster today (or until recently),” says Stefano Torniamenti, postdoctoral researcher at the University of Padua and first author of the paper.

The observed properties of the Hyades are best reproduced by simulations with two or three black holes at present, although simulations where all the black holes have been ejected (less than 150 million years ago, roughly the last quarter of the cluster’s age) can still give a good match, because the evolution of the cluster could not erase the traces of its previous black hole population.

The new results indicate that the Hyades-born black holes are still inside the cluster, or very close to the cluster. This makes them the closest black holes to the Sun, much closer than the previous candidate (namely the black hole Gaia BH1, which is 480 parsecs from the Sun).

In recent years, the breakthrough of the Gaia space telescope has made it possible for the first time to study the position and velocity of open cluster stars in detail and to identify individual stars with confidence.

“This observation helps us understand how the presence of black holes affects the evolution of star clusters and how star clusters in turn contribute to gravitational wave sources,” says Mark Gieles, a member of the UB Department of Quantum Physics and Astrophysics and host of the first author in Barcelona. “These results also give us insight into how these mysterious objects are distributed across the galaxy.”

The new study is the result of close collaboration between the University of Padova, ICUBB-IEEC, the University of Cambridge (United Kingdome), the European Southern Observatory (ESO) and the National Sun Yat-sen University (China).

The study, conducted using a commercial process simulator, unveils significant findings regarding the efficiency and economic viability of utilizing ammonia in power generation systems. Results indicate an impressive energy efficiency rate of 46.7% within the designed power generation process.

Through comprehensive economic analysis, the research team identified an upper limit for ammonia pricing at 421.3 $ tNH3-1 that allows competitive pricing against industrial electricity rates — a crucial factor in determining market competitiveness.

To further optimize ammonia imports into the Republic of Korea (KOR), five distinct scenarios were established based on historical data from the top ten exporting countries. Using the Monte Carlo method for ammonia production costs and carbon dioxide emissions in each nation, researchers optimized import quantities while minimizing overall emissions.

The results demonstrate that if solely reliant on carbon-based ammonia imports, carbon intensity ranges between 0.707-0.736 kgCO2-eq kWh−1 — exceeding KOR’s average value over a 20-year period. However, achieving a ratio of over 78% of carbon-neutral ammonia (Scenario 4) can make both environmental and economic aspects more favorable.

According to the research team, their findings provide valuable insights into optimizing ammonia exports and reducing carbon intensity. By adopting a holistic approach that encompasses all stages of the supply chain, significant progress can be made towards sustainable energy solutions.

“Our study sheds light on the immense potential of ammonia as an energy source,” said Professor Lim. “We have analyzed costs and greenhouse gas emissions while considering different commercialized methods of producing ammonia. Although renewable energy sources were not part of this particular study, our findings offer crucial insights into enhancing ammonia exports and promoting sustainability.”

The study findings have been published ahead of their official publication in the online version of Chem. Eng. J. on May 13, 2023. This work has been supported by the National Research Foundation of Korea (NRF), the Carbon Neutrality Demonstration and Research Center of UNIST, the Ministry of Trade, Industry and Energy and Korea (MOTIE), and Korea Evaluation Institute of Industrial Technology (KEIT). Their findings are expected to contribute to advancing the understanding and utilization of ammonia as a viable option for decentralized power generation systems.

A research team comprising the UK Centre for Ecology & Hydrology (UKCEH) and the Universities of Birmingham, Reading, Surrey and Southern Queensland, found that ozone substantially changes the size and scent of floral odour plumes given off by flowers, and that it reduced honeybees’ ability to recognise odours by up to 90% from just a few metres away.

Ground-level ozone typically forms when nitrogen oxide emissions from vehicles and industrial processes react with volatile organic compounds emitted from vegetation in the presence of sunlight.

Professor Christian Pfrang from the University of Birmingham who collaborated on the research said: “Our study provides robust evidence that the changes due to ground-level ozone on floral scent cause pollinators to struggle to carry out their crucial role in the natural environment also with implications for food security.”

The findings suggest that ozone is likely to be having a negative impact on wildflower abundance and crop yields. International research has already established that ozone has a negative impact on food production because it damages plant growth.

Dr Ben Langford, an atmospheric scientist at UKCEH who led the study said: “Some 75% of our food crops and nearly 90% of wild flowering plants depend, to some extent, upon animal pollination, particularly by insects. Therefore, understanding what adversely affects pollination, and how, is essential to helping us preserve the critical services that we reply upon for production of food, textiles, biofuels and medicines, for example.”

The researchers used a 30-m wind tunnel at Surrey University to monitor how the size and shape of odour plumes changed in the presence of ozone. As well as decreasing the size of the odour plume the scientists found that the scent of the plume changed substantially as certain compounds reacted away much faster than others.

Honeybees were trained to recognise the same odour blend and then exposed to the new, ozone-modified odours. Pollinating insects use floral odours to find flowers and learn to associate their unique blend of chemical compounds with the amount of nectar it provides, allowing them to locate the same species in the future.

The research showed that towards the centre of plumes, 52% of honeybees recognised an odour at 6 metres, decreasing to 38% at 12 m. At the edge of plumes, which degraded more quickly, 32% of honeybees recognised a flower from 6 m away and just a tenth of the insects from 12 m away.

The study indicates that ozone could also affect insects’ other odour-controlled behaviours such attracting a mate.

The research was funded by the Natural Environment Research Council, part of UK Research and Innovation, and was published in the journal Environmental Pollution.

Professor Christian Pfrang concluded: “We know that air pollution has a detrimental effect on human health, biodiversity and the climate, but now we can see how it prevents bees and other pollinating insects from carrying out their key job. This should act as a wake up call to take action on air pollution and help safeguard food production and biodiversity for the future.”

Steel, cement, and chemical manufacturing are especially difficult industries to decarbonize, as carbon and fossil fuels are inherent ingredients in their production. Technologies that can capture carbon emissions and convert them into forms that feed back into the production process could help to reduce the overall emissions from these “hard-to-abate” sectors.

But thus far, experimental technologies that capture and convert carbon dioxide do so as two separate processes, that themselves require a huge amount of energy to run. The MIT team is looking to combine the two processes into one integrated and far more energy-efficient system that could potentially run on renewable energy to both capture and convert carbon dioxide from concentrated, industrial sources.

In a study appearing today in ACS Catalysis, the researchers reveal the hidden functioning of how carbon dioxide can be both captured and converted through a single electrochemical process. The process involves using an electrode to attract carbon dioxide released from a sorbent, and to convert it into a reduced, reusable form.

Others have reported similar demonstrations, but the mechanisms driving the electrochemical reaction have remained unclear. The MIT team carried out extensive experiments to determine that driver, and found that, in the end, it came down to the partial pressure of carbon dioxide. In other words, the more pure carbon dioxide that makes contact with the electrode, the more efficiently the electrode can capture and convert the molecule.

Knowledge of this main driver, or “active species,” can help scientists tune and optimize similar electrochemical systems to efficiently capture and convert carbon dioxide in an integrated process.

The study’s results imply that, while these electrochemical systems would probably not work for very dilute environments (for instance, to capture and convert carbon emissions directly from the air), they would be well-suited to the highly concentrated emissions generated by industrial processes, particularly those that have no obvious renewable alternative.

“We can and should switch to renewables for electricity production. But deeply decarbonizing industries like cement or steel production is challenging and will take a longer time,” says study author Betar Gallant, the Class of 1922 Career Development Associate Professor at MIT. “Even if we get rid of all our power plants, we need some solutions to deal with the emissions from other industries in the shorter term, before we can fully decarbonize them. That’s where we see a sweet spot, where something like this system could fit.”

The study’s MIT co-authors are lead author and postdoc Graham Leverick and graduate student Elizabeth Bernhardt, along with Aisyah Illyani Ismail, Jun Hui Law, Arif Arifutzzaman, and Mohamed Kheireddine Aroua of Sunway University in Malaysia.

Breaking bonds

Carbon-capture technologies are designed to capture emissions, or “flue gas,” from the smokestacks of power plants and manufacturing facilities. This is done primarily using large retrofits to funnel emissions into chambers filled with a “capture” solution — a mix of amines, or ammonia-based compounds, that chemically bind with carbon dioxide, producing a stable form that can be separated out from the rest of the flue gas.

High temperatures are then applied, typically in the form of fossil-fuel-generated steam, to release the captured carbon dioxide from its amine bond. In its pure form, the gas can then be pumped into storage tanks or underground, mineralized, or further converted into chemicals or fuels.

“Carbon capture is a mature technology, in that the chemistry has been known for about 100 years, but it requires really large installations, and is quite expensive and energy-intensive to run,” Gallant notes. “What we want are technologies that are more modular and flexible and can be adapted to more diverse sources of carbon dioxide. Electrochemical systems can help to address that.”

Her group at MIT is developing an electrochemical system that both recovers the captured carbon dioxide and converts it into a reduced, usable product. Such an integrated system, rather than a decoupled one, she says, could be entirely powered with renewable electricity rather than fossil-fuel-derived steam.

Their concept centers on an electrode that would fit into existing chambers of carbon-capture solutions. When a voltage is applied to the electrode, electrons flow onto the reactive form of carbon dioxide and convert it to a product using protons supplied from water. This makes the sorbent available to bind more carbon dioxide, rather than using steam to do the same.

Gallant previously demonstrated this electrochemical process could work to capture and convert carbon dioxide into a solid carbonate form.

“We showed that this electrochemical process was feasible in very early concepts,” she says. “Since then, there have been other studies focused on using this process to attempt to produce useful chemicals and fuels. But there’s been inconsistent explanations of how these reactions work, under the hood.”

Solo CO₂

In the new study, the MIT team took a magnifying glass under the hood to tease out the specific reactions driving the electrochemical process. In the lab, they generated amine solutions that resemble the industrial capture solutions used to extract carbon dioxide from flue gas. They methodically altered various properties of each solution, such as the pH, concentration, and type of amine, then ran each solution past an electrode made from silver — a metal that is widely used in electrolysis studies and known to efficiently convert carbon dioxide to carbon monoxide. They then measured the concentration of carbon monoxide that was converted at the end of the reaction, and compared this number against that of every other solution they tested, to see which parameter had the most influence on how much carbon monoxide was produced.

In the end, they found that what mattered most was not the type of amine used to initially capture carbon dioxide, as many have suspected. Instead, it was the concentration of solo, free-floating carbon dioxide molecules, which avoided bonding with amines but were nevertheless present in the solution. This “solo-CO₂” determined the concentration of carbon monoxide that was ultimately produced.

“We found that it’s easier to react this ‘solo’ CO₂, as compared to CO₂ that has been captured by the amine,” Leverick offers. “This tells future researchers that this process could be feasible for industrial streams, where high concentrations of carbon dioxide could efficiently be captured and converted into useful chemicals and fuels.”

“This is not a removal technology, and it’s important to state that,” Gallant stresses. “The value that it does bring is that it allows us to recycle carbon dioxide some number of times while sustaining existing industrial processes, for fewer associated emissions. Ultimately, my dream is that electrochemical systems can be used to facilitate mineralization, and permanent storage of CO₂ — a true removal technology. That’s a longer-term vision. And a lot of the science we’re starting to understand is a first step toward designing those processes.”

This research is supported by Sunway University in Malaysia.

Digesting a crunchy critter starts with the audible grinding of its rigid protective covering — the exoskeleton. Unpalatable as it may sound, the hard cover might be good for the metabolism, according to a new study, in mice, from Washington University School of Medicine in St. Louis.

The researchers, led by Steven Van Dyken, PhD, an assistant professor of pathology & immunology, found in mice that digesting chitin, an abundant dietary fiber in insect exoskeletons and also mushrooms and crustacean shells, engages the immune system. An active immune response was linked to less weight gain, reduced body fat and a resistance to obesity.

“Obesity is an epidemic,” Van Dyken said. “What we put into our bodies has a profound effect on our physiology and on how we metabolize food. We’re investigating ways to counteract obesity based on what we learn about how the immune system is engaged by diet.”

The study is published Sept. 7 in Science.

The immune system is well known for safeguarding the body against various threats, including bacteria, viruses, allergens and even cancer. The researchers found that a particular arm of the immune system also is involved in chitin digestion. Stomach distention after chitin ingestion activates an innate immune response that triggers stomach cells to ramp up production of enzymes, known as chitinases, that break down chitin. Of note, chitin is insoluble — incapable of being dissolved in liquid — and thus requires enzymes and harsh acidic conditions to digest.

Do-Hyun Kim, PhD, a postdoctoral research associate and first author on the study, performed the experiments in germ-free mice lacking intestinal bacteria. His results show that chitin activates immune responses in the absence of bacteria.

“We think chitin digestion mainly relies on the host’s own chitinases,” Van Dyken said. “The stomach cells change their enzymatic output through a process we refer to as adaptation. But it is surprising that this process is happening without microbial input, because bacteria in the gastrointestinal tract are also sources of chitinases that degrade chitin.” Van Dyken noted that in mice with intestinal bacteria, dietary chitin altered the bacterial composition in the lower gastrointestinal tract, suggesting that gut bacteria also adapt to chitin-containing food after it leaves the stomach.

The research team found that the greatest impact on obesity in mice occurred when chitin activated the immune system but was not digested. Mice fed a high-fat diet also were given chitin. Some mice lacked the ability to produce chitinases to break down chitin. The mice that ate chitin but couldn’t break it down gained the least amount of weight, had the lowest body fat measurements and resisted obesity, compared with mice that didn’t eat chitin and with those that did but could break it down.

If the mice could break down chitin, they still benefited metabolically, but they adapted by overproducing chitinases to extract nutrients from chitin.

Van Dyken and his team next plan to follow up on their findings in people, with a goal of determining whether chitin could be added to human diets to help control obesity.

“We have several ways to inhibit stomach chitinases,” he said. “Pairing those approaches with a chitin-containing food might have a very real metabolic benefit.”

While mammal extinctions are well-documented, very little research has explored the impact those losses had on the nuanced ways in which mammal communities interact with their environments. Researchers at the Georgia Institute of Technology are using a novel methodology to investigate how mammals’ ability to function in their environments has been threatened in the past, and what challenges they can expect to face in the future.

Jenny McGuire, associate professor in the School of Biological Sciences and leader of the Spatial Ecology and Paleontology Lab, and Daniel Lauer, a graduate student, looked millions of years into the past, observing how and why eastern African herbivores’ relationships with their environments changed across space and time in the face of biodiversity loss. They used a novel approach to build models that show how specific mammal traits — like body mass and tooth shape — evolved with their changing environments over time, revealing the factors that caused the biodiversity losses and how the losses affected the functioning of mammal communities. Their method offers a new strategy for investigating the implications of changing ecologies and prioritizing conservation efforts toward helping mammal communities flourish in the future.

Their research paper was published in the journal Nature Communications.

Combing the Data

The researchers began by diving into a collection of data from 186 sites across eastern Africa. The data contained records of over 200 extinct and 48 modern herbivore species (including the African elephant, giraffe, zebra, and hippopotamus), showing where and when each species lived at a given point in time over the past 7.4 million years. The data showed that mammal biodiversity in eastern Africa began to decline around 5 million years ago. It also revealed that aspects of biodiversity decline happened at multiple points, and that extinctions coincided with environmental changes and the emergence of early humans. But McGuire and Lauer wanted to know more.

“We wondered what we would find if we investigated how the mammals’ physical traits changed as their environments changed over time, rather than just looking at patterns in their biodiversity,” Lauer said. “This is important because if a mammal species possesses traits that are well-suited to its environment, it’s better able to contribute to the functioning of that environment. But if that is not the case, environments may not function as well as they could.”

To paint a fuller picture, they needed to examine biodiversity from a different perspective. This required a fresh approach, which led them to adapting a methodology known as ecometrics.

Ecometrics is an approach that looks at the relationships between the environmental conditions where animal communities are found — such as weather and vegetation — and the animal’s functional traits, which are traits that affect its biological performance. The team chose to focus on three traits: body mass, tooth height, and loph count (the number of ridges on molars).

Each of these traits exhibits a relationship based on the degree to which an environment is dominated by grasses versus woody plants. For example, if a species has a taller tooth, it can more durably consume the abrasive grassy vegetation of grasslands. With a shorter tooth, a species is instead suited to consume softer, woody vegetation, like shrubs.

For each of the three traits, they built a model of trait-environment relationships. They used trait data to estimate what the surrounding vegetation was like in each mammal community over time, specifically the percentage of trees and shrubs versus grassland.

“Using our models, we were able to use information about the traits occurring within mammal communities to estimate how the surrounding vegetation looked,” Lauer said. “Because these communities existed at different points in time, this enabled us to observe how consistent the mammals’ relationships with their environments remained through time.”

Analyzing Disruptions

Using their ecometric framework, the researchers uncovered a key difference between the mammal biodiversity declines that occurred before approximately 1.7 million years ago and those that occurred after. While biodiversity began declining around 5 million years ago, trait-environment relationships remained consistent despite that loss.

Their analysis demonstrated that earlier biodiversity losses were a result of species adapting to grassland environments or tracking their preferred environments across geographies. In short, those biodiversity losses didn’t necessarily have any sort of negative impact on the ability of mammal communities to function properly in their environments.

But later, around 1.7 million years ago, when climates became more arid and variable and tree cover declined to below 35%, a major shift occurred. Rapid losses in the number and variety of species occurred, along with a significant disruption in trait-environment relationships. The researchers’ findings suggest that, unlike prior biodiversity losses, those occurring over the past 1.7 million years likely threatened the ability for many mammal species to function well in local environmental conditions.

“Our findings fascinated us, because we were able to differentiate between the different biodiversity losses that were happening and their implications,” Lauer said. “This work reinforces the idea that not all biodiversity losses are the same.”

Protecting the Vulnerable

Their findings have important implications for the types of environmental and climatic changes that could affect mammals going forward. In the past, when changes were gradual and wildlife were able to move freely on the landscape, they could readily adapt to these environmental conditions.

Now, fragmentation of wildlife habitats by fences, roadways, and cities has the potential to limit the ability of wildlife to adapt to the rapid environmental changes occurring today. That is exacerbated by both the fast pace and increasing variability of today’s climate, which puts animals at risk of losing their ability to function properly in their local environments.

Moving forward, the team’s analysis can shed light on which mammal communities should be prioritized for future conservation efforts. The study demonstrates that among all the communities that are experiencing biodiversity losses, priority should be given to those most at-risk — the communities for whom future biodiversity losses will profoundly affect their ability to function properly.

“By examining the past, we can get a remarkably clear understanding of how animals have responded to prior environmental changes,” McGuire said. “We plan to work with conservation practitioners to use our findings to develop well-informed strategies for conserving the most at-risk mammal communities.”