Health24.com | Scientists warn of false-negative results with Covid-19 virus tests – what are the SA implications?

  • Study finds the odds of a false-negative test result is 1 in 5
  • The first four days after infection seem to be the highest risk
  • We spoke to an expert about how this impacts testing backlogs

Health24 recently reported on a general backlog in coronavirus testing in South Africa, and explained how our tests work.

Currently, our laboratories make use of one of the most-used diagnostic tools – the reverse transcriptase-polymerase chain reaction test (RT-PCR). This test makes use of a swab from the nasal passage or throat, where viral particles are then isolated from the sample.

While these tests play a huge role across the globe to help determine the spread of Covid-19, researchers at John Hopkins have found that they might be likely to give a false negative – where a virus cannot be detected through the sputum sample, even when a person is infected.

What are the odds of a false negative?

According to the research that was published in the Annals of Internal Medicine, the odds of a false negative through RT-PCR is one in five, and sometimes, even higher.

In the report on their findings, they found that the probability of a false negative decreases from 100% on day one of being infected to 67% on day four. The false negative rate further decreases to 20% on day eight.

On the day patients actually started to experience symptoms, the average false negative was 38%.

The researchers analysed seven previously published studies on RT-PCR to interpret their current research.

Could this be problematic given SA’s current situation?

As we reported on testing backlogs in several provinces around the country, we asked Professor Glenda Davison, laboratory expert and head of the Biomedical Sciences Department at Cape Peninsula University of Technology, if false negatives could also be experienced in South Africa, and what the implications would be.

She believes that like other countries that currently use the RT-PCR testing methods we are also likely to be experiencing false negatives. But unlike the reasons stated in the research paper, there are other factors that could also cause false negatives:

  • Sampling from the nose and throat may not always be adequate. The reason for this is that individuals may shed the virus in different rates and quantities and that the viral particles in the nose or throat sample are not enough to be detected, which can lead to a false result.
  • The amount and quality of the RNA (viral particles). “It is recommended that once a sample has been taken that it is immediately transported to the laboratory and that if this can’t be done, then it should be stored at 2–8 degrees  for  a maximum of 72 hours or frozen. If a sample is left at room temperature and not processed immediately, the RNA will begin to degrade, again leading to a false negative result as there just isn’t enough to be detected,” Professor Davison explains

She states that this is a difficult situation and that healthcare professionals and community screeners must be made aware of these causes to try and avoid as many of them as possible, avoiding the possibility of a false negative.

Could false negative results increase our Covid-19 spread?

According to Professor Davison, false negative results have all sorts of consequences, not only for those who are sick, but also for the effectiveness of contact tracing and screening.

“In many cases, tests are being performed on people who do not have any symptoms, but who have been in contact with a positive individual. If it is in the early stages (days one to four), or the specimen is not processed properly, they could very well test negative and not go into quarantine. This could, of course, lead to increased spread unless all contacts are made to self-isolate irrespective of a test result,” she told Health24.

But, we shouldn’t only look at testing and false negatives as a reason for increasing rates. “As we go into level three of lockdown and more people are returning to work, taking public transport and shopping, it is inevitable that the infection rate is going to increase,” she adds.

It is, however, important not to become complacent with the current measures and test methods we have in place.

“The fact is no laboratory test is foolproof and all have advantages and disadvantages. I think that when other forms of testing such as rapid antibody and antigen tests are made available, it will offer an alternative way to screen patients and those who have had the infection and recovered.

“However, these tests also have their pitfalls. In the meantime, it is important that we are all aware of the limitations of the RT PCR test and that false negative results are possible,” Professor Davison said.

READ | Latest on Covid-19 testing in SA: Public sector backlogs more than 6 days – an expert tells us more

READ | Covid-19: Call to reduce ‘unnecessary’ screening and testing in SA – and to target areas of concern

Image credit: Unsplash

Share Button

Health24.com | Covid-19 is more severe in smokers, an analysis of 19 studies show

  • More evidence of the severity of Covid-19 in smokers globally
  • Analysis looked at data involving more than 11 000 patients
  • As the disease progresses in smokers, higher risk of death seen

Covid-19 hits smokers much harder than nonsmokers, according to a new review.

Researchers from the University of California, San Francisco (UCSF), analysed 19 studies that included data on smoking and severity of Covid-19 among nearly 11 600 patients in the United States, China and Korea.

Most patients were hospitalised, but two studies also included outpatients. Just over 6% of participants had a history of smoking.

While Covid-19 symptoms worsened in 18% of all patients, the rate was 29.8% among current or former smokers, compared with 17.6% among non-smokers.

Higher risk of death

“Smoking is associated with substantially higher risk of Covid-19 progression,” said study co-author Stanton Glantz, director of the Center for Tobacco Control Research and Education at UCSF.

And when Covid-19 progressed, current or ex-smokers had more acute or critical conditions and a higher risk of death, the researchers found.

“This finding suggests that California’s ongoing strong tobacco control measures that have lowered smoking may, together with the state’s other strong public health interventions, be contributing to California’s efforts to thwart the effect of Covid-19,” Glantz said in a university news release.

Co-author Dr Roengrudee Patanavanich, a visiting scholar at UCSF, noted that the fact tobacco use is lower among Covid patients than the general population has been cited as evidence for a protective effect of smoking.

Lower immune function

“But this low prevalence may actually be due to an under-assessment of smoking, especially when you consider the difficult conditions involved when caring for people in often overwhelmed health systems,” said Patanavanich, of Ramathibodi Hospital at Mahidol University in Bangkok, Thailand.

Tobacco and electronic cigarettes both damage the upper airways and dampen immune function, which increases smokers’ risk and severity of lung infections, according to the researchers.

Quitting smoking and e-cigarettes should be added to the list of measures to combat the Covid-19 pandemic, the authors suggested.

The study was published on 13 May in the journal Nicotine & Tobacco Research.

Image credit: Getty Images

Share Button

NHS Seacole: Covid-19 rehab centre takes first patients

Covid-19 survivors can require heart, lung and muscle therapy, or psychological and social care.

Share Button

Health24.com | Coronavirus morning update: Level 3 regulations, SAHRC’s schools concern, and SANDF inquiry ongoing

WHAT’S HAPPENING IN SA

Cases update: 

The latest number of confirmed cases is 27 403.

According to the latest update, 577 deaths have been recorded in the country.

There had been 14 370 recoveries.

More than 655 700 tests have been been conducted so far, with more than 20 700 new tests.

READ MORE | All the confirmed cases of coronavirus in SA

Latest news:

Minister of Cooperative Governance and Traditional Affairs Nkosazana Dlamini-Zuma on Thursday released the regulations governing lockdown Level 3, which gets under way on 1 June.

She said the entire country will move to Level 3, regardless of whether it is a Covid-19 hotspot. She added, though, that additional restrictions may apply for districts with a high level of infections.

Level 3 regulations permit the sale of liquor between Monday and Thursday, from 09:00 and 17:00, but tobacco sales remain prohibited.

Dlamini-Zuma said, as the economy reopens, practising hygiene measures, such as handwashing and maintaining a safe social distance, will be “most important” to fight Covid-19 – in absence of a cure or vaccine.

Here’s everything you will be allowed to do, and what you won’t, when Level 3 commences on 1 June.

READ MORE | Explained: This is what you can and can’t do under Level 3 of the lockdown

The SA Human Rights Commission has written to Basic Education Minister Angie Motshekga to recommend that she delay the return to school of Grade 7 and 12 pupils.

They are set to return on 1 June but according to the commission, the Northern Cape office had indicated schools in that province would only be ready by 8 June.

It added various teachers’ unions also said the required conditions have not been met.

According to school governing bodies, about 3 500 schools did not have enough water.

“All these reports give the commission concerns whether – and considering that only three days remain before the date of opening as well as the amount of work that appears still remaining to be done – the schools will be ready to receive learners with the expected levels of safety by 1 June 2020,” it stated.

READ MORE | Rights commission says schools not ready for return of pupils

Empirical evidence would suggest smokers are “at risk of a negative outcome” with Covid-19, but a study in which smokers are exposed to the virus to prove this point cannot be done as it would be unethical, the acting director-general of the Department of Health, Anban Pillay, told the health committees of both Houses of Parliament on Thursday.

This after FF Plus MP Philip van Staden said he had quit smoking during the lockdown because he “won’t buy smokes on the black market”.

After an enquiry from committee chairperson Sibongiseni Dhlomo – who is a medical doctor and former health MEC – Van Staden confirmed he had quit completely, saying he was doing quite well.

He asked how many people being treated in hospitals for Covid-19 were smokers, and how many who died of the virus had smoked.

READ MORE | Empirical evidence suggests ‘negative outcomes’ for smokers, says acting health DG

Minister of Defence Nosiviwe Mapisa-Nqakula on Thursday said the inquiry into the death of Collins Khosa is not complete and, as such, there can be no determination on whether he was murdered.

Earlier on Thursday, the legal team representing Khosa’s family rejected an inquiry report by the SA National Defence Force (SANDF), which apparently cleared soldiers of causing Khosa’s death.

“The report by the SANDF is rubbish. We do not accept it, the evidence completely contradicts this report. It is ridiculous to say he died of some other cause,” Wikus Steyl, of Ian Levitt Attorneys, told News24 on Thursday.

News24 reported earlier that the board, led by Brigadier Viscount Ngcobo, found that Khosa and his brother-in-law, Thabiso Muvhango, undermined the female soldiers who approached them about drinking alcohol in their yard.

READ MORE | Collins Khosa inquiry ongoing, says defence minister

WHAT’S HAPPENING IN THE REST OF THE WORLD 

Cases update:

For the latest global data, follow this interactive map from Johns Hopkins University & Medicine.

Early on Friday morning, positive cases worldwide were more than 5.76 million, while deaths were more than 358 000.

The United States had the most cases in the world – 1.71 million, as well as the most deaths – more than 101 000.

READ MORE | All the confirmed cases worldwide

Latest news:

President Donald Trump on Thursday marked the “sad milestone” of 100 000 coronavirus deaths in the United States, after his earlier silence prompted criticism that he was failing in his duty to console victims and their loved ones.

“We have just reached a very sad milestone with the coronavirus pandemic deaths reaching 100 000,” Trump posted on Twitter, about 16 hours after the death toll passed the threshold according to a Johns Hopkins University tracker.

“To all of the families & friends of those who have passed, I want to extend my heartfelt sympathy & love for everything that these great people stood for & represent. God be with you!”

The US death toll, from 1.7 million confirmed infections, is by far the highest of any nation, and critics have accused the president of an inadequate early response to the pandemic.

READ MORE | After silence, Trump marks 100 000 virus deaths in US

England launched a “test and trace” system on Thursday, the latest weapon deployed in a battle to halt the coronavirus’s spread in one of the worst affected countries in the world.

Health Secretary Matt Hancock said it was people’s “civic duty” to comply with the new rules which will seek to track down people at risk from the disease.

“It’s incredibly important for anybody who gets symptoms… immediately to isolate at home and to get a test and not to leave the house,” he told BBC radio.

Under the system, a team of 25 000 tracers – supported by 20 000 testers and up to 7 000 clinicians – will text, email or call people who test positive for the virus and ask who they have been in close contact with.

READ MORE | Coronavirus test and trace system begins in England

LATEST RESEARCH

People who have a flawed gene linked to Alzheimer’s disease may face a higher risk of Covid-19, an international team of researchers reports.

Part of the increased risk among people with dementia may owe to high rates of new coronavirus infections in nursing homes. But this study suggests genetics may also be a factor.

The APOE e4e4 gene variant is known to increase Alzheimer’s risk up to 14 times. It also increases heart disease risk.

Medical school researchers at the University of Exeter in England and the University of Connecticut analyzed data from more than 382 000 people of European ancestry.

READ MORE | Alzheimer’s gene linked to severe Covid-19 risk

In the race to find treatments for Covid-19, the antiviral drug remdesivir has received much of the attention. But researchers say a class of long-used drugs called interferons also looks promising.

Trials testing the medications are underway in several countries. A small study published last week in The Lancet found that a three-drug regimen, containing an interferon, helped hospitalised Covid-19 patients go home a few days sooner.

But there should be a bigger research push to test interferons as stand-alone treatments, said Eleanor Fish, a professor of immunology at the University of Toronto in Canada.

In Wuhan, China, where the pandemic originated, doctors used the drug interferon alfa-2b to treat some hospitalised patients who were not yet sick enough to need a ventilator.

READ MORE | Could interferon drugs help fight Covid-19?

HEALTH TIPS (as recommended by the NICD and WHO)

• Maintain physical distancing – stay at least one metre away from somebody who is coughing or sneezing

• Practise frequent hand-washing, especially after direct contact with ill people or their environment

• Avoid touching your eyes, nose and mouth, as your hands touch many surfaces and could potentially transfer the virus

• Practise respiratory hygiene – cover your mouth with your bent elbow or tissue when you cough or sneeze. Remember to dispose the tissue immediately after use.

READ MORE: Coronavirus 101 

Image credit: Getty Images

Share Button

Using electrical stimulus to regulate genes

This is how it works. A device containing insulin-producing cells and an electronic control unit is implanted in the body of a diabetic. As soon as the patient eats something and their blood sugar rises, they can use an app on their smartphone to trigger an electrical signal, or they can preconfigure the app do this automatically if the meal has been entered in advance. A short while afterwards, the cells release the necessary amount of insulin produced to regulate the patient’s blood sugar level.

This might sound like science fiction but it could soon become reality. A team of researchers led by Martin Fussenegger, ETH Professor of Biotechnology and Bioengineering at the Department of Biosystems Science and Engineering in Basel, have presented their prototype for such an implant in a new paper in the journal Science. Their study is the first to examine how gene expression can be directly activated and regulated using electrical signals. When testing their approach in mice, the researchers established that it worked perfectly.

The Basel-based scientists have a wealth of experience in developing genetic networks and implants that respond to specific physiological states of the body, such as blood lipid levels that are too high or blood sugar levels that are too low. Although such networks respond to biochemical stimuli, they can also be controlled by alternative, external influences like light. “We’ve wanted to directly control gene expression using electricity for a long time; now we’ve finally succeeded,” Fussenegger says.

A circuit board and cell container hold the key

The implant the researchers have designed is made up of several parts. On one side, it has a printed circuit board (PCB) that accommodates the receiver and control electronics; on the other is a capsule containing human cells. Connecting the PCB to the cell container is a tiny cable.

A radio signal from outside the body activates the electronics in the implant, which then transmits electrical signals directly to the cells. The electrical signals stimulate a special combination of calcium and potassium channels; in turn, this triggers a signalling cascade in the cell that controls the insulin gene. Subsequently, the cellular machinery loads the insulin into vesicles that the electrical signals cause to fuse with the cell membrane, releasing the insulin within a matter of minutes.

Coming soon: the Internet of the Body

Fussenegger sees several advantages in this latest development. “Our implant could be connected to the cyber universe,” he explains. Doctors or patients could use an app to intervene directly and trigger insulin production, something they could also do remotely over the internet as soon as the implant has transmitted the requisite physiological data. “A device of this kind would enable people to be fully integrated into the digital world and become part of the Internet of Things — or even the Internet of the Body,” Fussenegger says.

When it comes to the potential risk of attacks by hackers, he takes a level-headed view: “People already wear pacemakers that are theoretically vulnerable to cyberattacks, but these devices have sufficient protection. That’s something we would have to incorporate in our implants, too,” he says.

As things stand, the greatest challenge he sees is on the genetic side of things. To ensure that no damage is caused to the cells and genes, he and his group need to conduct further research into the maximum current that can be used. The researchers must also optimise the connection between the electronics and the cells.

And a final hurdle to overcome is finding a new, easier and more convenient way to replace the cells used in the implant, something that must be done approximately every three weeks. For their experiments, Fussenegger and his team of researchers attached two filler necks to their prototype in order to replace the cells; they want to find a more practical solution.

Before their system can be used in humans, however, it must still pass a whole series of clinical tests.

Story Source:

Materials provided by ETH Zurich. Original written by Peter Rüegg. Note: Content may be edited for style and length.

Share Button

Global environmental changes leading to shorter, younger trees

Ongoing environmental changes are transforming forests worldwide, resulting in shorter and younger trees with broad impacts on global ecosystems, scientists say.

In a global study published in the May 29 issue of the journal Science, researchers led by the U.S. Department of Energy’s Pacific Northwest National Laboratory found that rising temperatures and carbon dioxide have been altering the world’s forests through increased stress and carbon dioxide fertilization and through increasing the frequency and severity of disturbances such as wildfire, drought, wind damage and other natural enemies. Combined with forest harvest, the Earth has witnessed a dramatic decrease in the age and stature of forests.

“This trend is likely to continue with climate warming,” said Nate McDowell, a PNNL Earth scientist and the study’s lead author. “A future planet with fewer large, old forests will be very different than what we have grown accustomed to. Older forests often host much higher biodiversity than young forests and they store more carbon than young forests.”

Carbon storage and rich biodiversity are both keys to mitigate climate change.

The study, “Pervasive shifts in forest dynamics in a changing world,” determined that forests have already been altered by humans and will mostly likely continue to be altered in the foreseeable future, resulting in a continued reduction of old-growth forests globally.

Three conditions generate a deforestation loop

The researchers used satellite imagery along with a detailed literature review to conclude that the globally averaged tree size has declined over the last century and is likely to continue declining due to continuing environmental changes.

Several factors have led to the loss of trees through human activity and natural causes — clear-cutting, wildfire, insects and disease are leading causes. Known as deforestation, the phenomenon has led to an imbalance of three important characteristics of a diverse and thriving forest: (1) recruitment, which is the addition of new seedlings to a community; (2) growth, the net increase in biomass or carbon; and (3) mortality, the death of forest trees.

“Mortality is rising in most areas, while recruitment and growth are variable over time, leading to a net decline in the stature of forests,” said McDowell. “Unfortunately, mortality drivers like rising temperature and disturbances such as wildfire and insect outbreaks are on the rise and are expected to continue increasing in frequency and severity over the next century. So, reductions in average forest age and height are already happening and they’re likely to continue to happen.”

Vegetation dynamics are changing

The conditions promoting deforestation will likely accelerate, drastically altering the living conditions for plants and animals, McDowell said.

“Over the last hundred years we’ve lost a lot of old forests,” McDowell said.” And they’ve been replaced in part by non-forests and in part by young forests. This has consequences on biodiversity, climate mitigation, and forestry.”

Wide-ranging impact

The study also reveals that other mechanisms of deforestation — “chronically changing drivers” — are underway. They include:

  • Atmospheric carbon dioxide: Carbon dioxide levels in the atmosphere have increased dramatically since the Industrial Revolution and are projected to continue rising over the next century. Higher levels of carbon dioxide can increase a tree’s growth rate and seed production. However, such carbon dioxide fertilization appears to only happen in younger forests with abundant nutrients and water. Most forests globally are exposed to limitations in nutrients and water, which drastically reduces the carbon dioxide benefits to trees.
  • Temperature: Rising temperatures limit life-giving photosynthesis, leading to lower growth, higher mortality, and reduced regeneration. This is one key to shorter trees, the study determined.
  • Droughts: They’re expected to increase in frequency, duration and severity globally. Drought can directly cause tree death or indirectly lead to mortality through associated increases in insect or pathogen attack.

Other factors are altering the face of the world’s forests:

  • Wildfire is increasing in many forests worldwide and future fires may be more frequent than they have been in the past 10,000 years in some regions, the study found. Plant growth following forest fires may be slow or absent due to elevated temperatures.
  • Biotic deforestation disturbances — by insects, fungi and choking vines — have been on the increase. The carbon storage lost to insects each year is the same as the amount of carbon emitted by 5 million vehicles, a study published last year says. This is expected to continue with warming, along with other biotic deforestation disturbances, such as fungi and bacteria. In the tropics, vines that use other plants as host structures are choking trees to death.
  • Wood harvests alone has had a huge impact on the shift of global forests towards younger ages or towards non-forest land, reducing the amount of forests, and old-growth forests, globally. Where forests are re-established on harvested land, the trees are smaller and biomass is reduced.

Deforestation study born of collaboration

McDowell collaborated with more than 20 scientists to produce the deforestation study, which included data and observations made in more than 160 previous studies.

“Environmental changes are making disturbances worse, and this is causing a change in vegetation dynamics towards shorter, younger forests,” McDowell said.

The DOE’s Office of Science and several other organizations funded the work. The study’s authors include PNNL’s Ben Bond-Lamberty of the Joint Global Change Research Institute, and other researchers come from more than a dozen institutions, including four national laboratories: PNNL, Lawrence Berkeley, Los Alamos and Oak Ridge.

Share Button

New ‘whirling’ state of matter discovered in an element of the periodic table

The strongest permanent magnets today contain a mix of the elements neodymium and iron. However, neodymium on its own does not behave like any known magnet, confounding researchers for more than half a century. Physicists at Radboud University and Uppsala University have shown that neodymium behaves like a so-called ‘self-induced spin glass,’ meaning that it is composed of a rippled sea of many tiny whirling magnets circulating at different speeds and constantly evolving over time. Understanding this new type of magnetic behaviour refines our understanding of elements on the periodic table and eventually could pave the way for new materials for artificial intelligence. The results will be published on 29th of May, in Science.

“In a jar of honey, you may think that the once clear areas that turned milky yellow have gone bad. But rather, the jar of honey starts to crystallize. That’s how you could perceive the ‘aging’ process in neodymium.” Alexander Khajetoorians, professor in Scanning probe microscopy, together with professor Mikhail Katsnelson and assistant professor Daniel Wegner, found that the material neodymium behaves in a complex magnetic way that no one ever saw before in an element on the periodic table.

Whirling magnets and glasses

Magnets are defined by a north and south pole. Dissecting a regular fridge magnet, one finds many atomic magnets, so-called ‘spins’, that are all aligned along the same direction and define the north and south pole. Quite differently, some alloy materials can be a ‘spin glass,’ randomly placed spins point in all kinds of directions. Spin glasses derive their name-sake from the amorphous evolving structure of the atoms in a piece of glass. In this way, spin glasses link magnetic behaviour to phenomena in softer matter, like liquids and gels.

Spin glasses have been known to sometimes occur in alloys, which are combinations of metals with one or more other elements and with an amorphous structure, but never in pure elements of the periodic table. Surprisingly, Radboud researchers found that the atomic spins of a perfectly ordered piece of the rare-earth element neodymium form patterns that whirl like a helix but constantly change the exact pattern of the helix. This is the manifestation of a new state of matter called a ‘self-induced spin glass’.

Seeing the magnetic structure

“In Nijmegen, we are specialists in scanning tunnelling microscopy (STM). It allows us to see the structure of individual atoms, and we can resolve the north and south poles of the atoms,” Wegner explains. “With this advancement in high-precision imaging, we were able to discover the behaviour in neodymium, because we could resolve the incredibly small changes in the magnetic structure. That’s not an easy thing to do.”

A material that behaves like neurons

This finding opens up the possibility that this complex and glassy magnetic behaviour could also be observed in uncountable new materials, including other elements on the periodic table. Khajetoorians: “It will refine textbook knowledge of the basic properties of matter. But it will also provide a proving ground to develop new theories where we can link physics to other fields, for example, theoretical neuroscience.”

“The complex evolution of neodymium may be a platform to mimic basic behaviour used in artificial intelligence,” Khajetoorians continues. “All the complex patterns which can be stored in this material can be linked to image recognition.”

With the advancement of AI and its large energy footprint, there is increasing demand to create materials that can perform brain-like tasks directly in hardware. “You could never build a brain-inspired computer with simple magnets, but materials with this complex behaviour could be suitable candidates,” Khajetoorians says.

Story Source:

Materials provided by Radboud University Nijmegen. Note: Content may be edited for style and length.

Share Button

About 7% have had coronavirus, says ONS survey

The estimate is based on blood tests on 885 people in England as part of a household survey by the ONS.

Share Button

Coronavirus: Dental practices to reopen from 8 June

Dental practices in England have been told they can reopen from Monday, 8 June.

Share Button

Create and Share

Many people who want to earn a living from creative work get stuck trying to figure out a business model. Meanwhile they’re not actually doing much creating. They’re waiting for clarity.

Waiting for clarity is a waste of time. So is trying to figure out the perfect transition plan in advance. It’s easier to find clarity when you’re in motion.

I suggest that you start simpler. Focus on getting into the rhythm of creating and sharing. Don’t worry about monetization. Don’t worry about the business model – not if that’s a cause of stuckness for you.

If you’re going to focus on anything, seek to find the people who will appreciate what you can create and share. Appreciation is a sign that value is being received and acknowledged. If there’s no appreciation, such as thank you’s and other forms of acknowledgement coming back to you, chances are that little value is being delivered. Don’t mistakenly assume that this implies you’re not creating value. It’s more likely that you’re not sharing with the right people.

If you create something and share it, and the people you share it with don’t appreciate it, stop sharing with them. Someone else will appreciate it, so share it somewhere else – anywhere else. Even if you bop around randomly trying to find the right people, it’s better than wasting your life sharing with misaligned people who will whine at you or ignore ou.

If you’re sharing on social media, I’d go so far as to drop the people who don’t like what you’re sharing or who go out of their way to criticize you. They’ll only slow you down. Clear them out, and make some room for aligned people to get through.

It’s fine if some people in your audience are neutral, but if they’re dead weight as far as appreciation goes, then don’t invest in trying to please them. Just let ’em go.

Trust that you’ll find your audience. You’ll find your real audience faster by quickly firing the wrong audience members.

Seek to create in tune with appreciation, at least if you want to make your creating and sharing sustainable. Money is a form of appreciation, and if the appreciation is there, it isn’t that hard to turn that into income. But it’s pretty damned hard to do that if there’s little or no appreciation.

You can still work on business models. You can still experiment with income generation along the way. But the fundamental piece to get working early on is creating and sharing. No one can stop you from doing that. You can start on that today.

Once you find people who appreciate your work, you can even co-create your business model with them. That’s how I got started. People who appreciated my work shared ideas and suggestions for how I could monetize it. Some gave me examples of how other people were monetizing work that I might adopt as well. All I had to do was follow that flow, and it was the regular creating and sharing that made it sustainable.

You’ll probably have some objections to doing this. That’s fine. My counter-objection is that creating and sharing, even without much of a plan, works a lot better than vacillating, delaying, second-guessing yourself, and perhaps the most popular lament of all: I don’t know how. So if your objections are keeping you stuck, maybe they don’t amount to a hill of beans. If you create and share regularly and you move towards people who appreciate what you share, you can eventually have lots of hills with lots of beans.

Remember how easy it was to create stuff when you were a kid. Just grab some colored paper, glue, scissors, and make a mess with it. Someone will appreciate it if you show it to enough people. I’ve seen displays in modern art museums that look no better than what a five-year old could create, and there are still people who appreciate it. So get your crusty, whiny, cowardly AF adult brain out of your way, and just create and share stuff. If you don’t know where to start, pretend that you’re five years old, and start anyway.

Share Button