Landmarks facing climate threats could ‘transform’

How much effort should be spent trying to keep Venice looking like Venice — even as it faces rising sea levels that threaten the city with more frequent extreme flooding?

As climate change threatens cultural sites, preservationists and researchers are asking whether these iconic locations should be meticulously restored or should be allowed to adapt and “transform.”

“The traditional preservationist paradigm is the idea of static preservation — materials stay in a constant state, and we protect the values identified at the time they were designated,” said Erin Seekamp, first author of a paper that raises these questions and a professor of parks, recreation and tourism management at North Carolina State University.

“However, it’s really infeasible to manage all heritage sites and property through persistent adaptation due to the extent of projected climate impacts,” Seekamp said. “We are arguing for preservationists to shift toward transformation in some cases.”

The paper was co-authored by Eugene Jo, World Heritage Leadership Programme Coordinator at the International Centre for the Study of the Preservation and Restoration of Cultural Property (ICCROM).

Seekamp and Jo presented two ideas for how transformation could take place: adaptively in response to climate change impacts, or in advance of anticipated or projected impacts.

Seekamp and Jo argue that some cultural icons “severely impacted” by climate change-related events could remain damaged to serve as a “memory” of that event, and to help communities better understand and learn about the climate-related vulnerabilities of places.

In other cases, they argued that some landmarks at risk of climate change should be allowed to “transform” when the cost of preserving a landmark is too high. Decisions about how these important landmarks can and should change need to be guided by the values of descendants of people and cultures that those sites were originally intended to highlight and preserve, they said.

“Individuals whose heritage is at stake, and who receive benefits from those places as tourist sites, should be part of the discussions about change, and about what preserving values connected with sites should look like,” Seekamp said.

Their ideas about transformation were inspired by the concept of resilience in ecology, Seekamp said, in which a landscape can absorb change in response to a disturbance, and populations shift toward a “new state” or reorganize.

“What we’re arguing is that the heritage field adopt an ecological framework of resilience to expand the current paradigm of preservation toward transformation to allow for autonomous and anticipatory adaptation to occur,” Seekamp said.

They focused their recommendations on cultural landmarks designated as World Heritage Sites, which are landmarks or areas with important cultural, natural or scientific significance that have legal protections through the United Nations Educational, Scientific and Cultural Organization, or UNESCO.

They argued that preservation leaders create a new category for sites facing climate threats called “World Heritage Sites in Climatic Transformation.” That list could help gather information and better document sites that face threats from climate change, as well as help channel resources toward them.

“We are argue that policy reform is needed to create the flexibility that would allow for both the continuity of heritage values, and the evolution of place meaning and societal benefits in face of climate change,” Seekamp said.

Seekamp also indicated that the new designation could aid a natural landmark like Florida’s Everglades National Park. While the park isn’t a site recognized for its cultural heritage, which was the focus of Seekamp’s viewpoint — it was designated as a World Heritage Site because of its outstanding geologic and natural features — there are material remains of heritage present that are also at risk to rising seas and increasing temperatures.

The park is the traditional lands of the Seminole Tribe of Florida and the Miccosukee Tribe, as well as the Calusa. The designation of the park as a “World Heritage Site in Climatic Transformation” could allow managers to think about alternatives that better integrate culture and cultural values in changing environments, Seekamp said.

“We’re not saying that this should open the door for development or tourism,” Seekamp added. “We’re saying, ‘Let’s create a new categorization, and enable those places to not just think about persistent adaptation, but about transformative adaptation.’ It allows us to think about alternatives.”

Share Button

Breaking molecular traffic jams with finned nanoporous materials

Thousands of chemical processes used by the energy industry and for other applications rely on the high speed of catalytic reactions, but molecules frequently are hindered by molecular traffic jams that slow them down. Now an entirely new class of porous catalysts has been invented, using unique fins to speed up the chemistry by allowing molecules to skip the lines that limit the reaction.

This discovery was published in Nature Materials.

The breakthrough focused on reducing barriers for molecules accessing the interior pores of catalysts, called zeolites — aluminosilicates with pores smaller than a nanometer. Zeolites are widely used in commercial processes as solid catalysts for the production of gasoline and value-added chemicals and other products.

In these applications, chemistry within the zeolite pores first requires molecules to find the small number of openings on the outside surface of catalyst particles. This creates a queue of molecules that must “wait in line” to enter the particle, diffuse to the active site involved in the chemical reaction, and then exit the particle.

One approach to address these transport problems has been to synthesize small nanoparticles. As zeolites become smaller, the amount of surface area exposing the pores increases per amount of catalyst material, which grants increased access for molecules entering the pores. Smaller particles also reduce the internal distance molecules must travel through the particle.

However, the synthesis of these smaller zeolite particles is expensive, and the resulting particles are often too inefficient for practical applications.

Researchers at the University of Houston, led by Jeffrey Rimer, Abraham E. Dukler Professor of chemical and biomolecular engineering, developed a way to induce larger catalyst particles to behave like nanoparticles — that is, to allow molecules to enter, spark a reaction and exit quickly, by growing protrusions, or fins, on the surfaces of catalyst particles. By adding nanoscale fins that protrude from the external surface of large particles, the roughened exterior of the particle significantly increased in surface area, granting molecules increased access and reducing the transport limitations that frequently plague conventional zeolite materials.

“Our new synthesis approach capitalizes on work we have been doing in our group for many years, focused on controlling zeolite crystallization in ways that enable the growth of fins,” Rimer said. “This new class of materials bypasses the need to directly synthesize nanoparticles, creating a new paradigm in zeolite catalyst design.”

Rimer worked with a team of international experts in materials synthesis, characterization and modeling to demonstrate the capability of finned zeolites to improve the performance of this unique family of solid catalysts. By comparing finned zeolites with conventional catalytic materials, they showed that zeolites with fins lasted almost eight times longer. Rimer said the incorporation of fins leads to shorter internal diffusion pathways and ensures molecules efficiently reach the reaction sites while reducing the propensity of carbon-based species to become immobilized. That build up ultimately deactivates the catalyst.

Xiaodong Zou, professor of inorganic and structural chemistry at Stockholm University, and members of her laboratory conducted advanced 3D electron microscopy characterization to unravel the pore structures of the finned crystals and confirmed that the fins were extensions of the underlying crystal and did not create impediments for internal diffusion.

“It is amazing to see how well all these hundreds of individual nanofins are aligned with the parent crystal,” Zou said.

Additional state-of-the-art techniques for characterizing zeolite catalysts in real time were performed at Utrecht University by the research group of Bert Weckhuysen, professor of catalysis, energy and sustainability. These measurements confirmed the exceptional ability of finned zeolites to prolong catalyst activity well beyond that of larger catalysts.

Weckhuysen said the use of operando spectroscopy clearly showed how the introduction of fins lowered the amount of external coke deposits during catalysis. “That substantially increased the lifetime of finned zeolite crystals,” he said.

Jeremy Palmer, assistant professor of chemical and biomolecular engineering at UH, used computational methods to model finned materials and explain how the new design works to improve catalysis.

Researchers had expected the fins would perform better than a standard-sized zeolite catalyst, he said. “But we found it was not just a 10% or 20% improvement. It was a tripling of efficiency. The magnitude of the improvement was a real surprise to us.”

Additional work at the University of Minnesota by the research group of Paul Dauenhauer, professor of chemical engineering and materials science, and by Michael Tsapatsis, professor of chemical and biomolecular engineering at Johns Hopkins University, confirmed the enhanced mass transport properties of finned zeolites. Using a new method to track molecule diffusion by infrared light, the UM researchers demonstrated that the fins enhanced molecule transport between 100 and 1,000 times faster than conventional particles.

“The addition of fins allows molecules to get inside the channels of zeolites where the chemistry happens, but it also lets molecules quickly get out of the particle, which lets them operate for a much longer period of time,” Dauenhauer said.

The discovery has immediate relevance to industry for a host of applications, including the production of fuels, chemicals for plastics and polymers, and reactions that make molecules for food, medicine and personal care products.

“The beauty of this new discovery is its potential generalization to a wide range of zeolite materials, using techniques that are easy to incorporate in existing synthesis processes,” Rimer said. “The ability to control the properties of fins could allow for much greater flexibility in the rational design of zeolite catalysts.”

This work was supported by and is part of a larger mission of the U.S. Department of Energy, with additional support provided by various international funding agencies.

Share Button

Batch Blogging

Almost all of the articles I’ve posted this year – or ever, actually – were written on the same day they were published. It’s been my blogging style for the past 16 years to write and edit posts in a single writing session and then to publish them when they’re complete.

This year is unusual because it’s the first year that I’ve made a commitment to publish a new post every day of the year, so up until this point, I’ve been writing every day of the year. Very occasionally I’ve written two posts in one day, but nearly all of my posts were published on the same day I wrote them.

Last week I decided to do something different. On Tuesday, August 4th, I opted to try batch blogging – basically to spend my whole workday writing and editing blog articles and queuing them up to be published on subsequent days.

I shunned this approach in previous years because I always felt that when an article is done, I should share it immediately. Why make people wait?

With this year’s daily blogging, however, I see this differently. I don’t think people need (or want) multiple articles in a single day. I’m already writing and publishing faster than some people are able to keep up with the reading. So a faster rate of publication seems like overkill.

I also like that if I write multiple posts in a day, I can take some days off from blogging. I don’t necessarily need to do that, but I’m curious how it will affect me. As a side note, somehow I picked the best possible year for this daily commitment – gotta love the power of trusting intuitive signals.

I’d always intended to test batch blogging sometime during this year, which is why I framed my daily blogging commitment as daily publishing, not daily writing. After doing 7+ months so far, continuing to blog every day for another 5 months seems pretty easy and straightforward – maybe a bit too easy – so I’d like to play with different approaches to see how they suit me.

I think batch creation is easier (and faster) to do with videos or audios, but I’m pretty fast at writing, so I felt I could make it work. I could make this easier by favoring shorter posts, but generally I like to let the content itself dictate the length. Writing flows through me like a river, and I find it best not to try to control it too tightly.

To speed things along, I brainstormed enough ideas for 8 new articles the day before my batch blogging day, so on the actual writing day I could just focus on writing articles instead of coming up with topics. I also jotted down a few keywords or quick ideas for each article, like 20-50 words to help me frame and capture each idea.

Additionally, I posted about this experiment in the CGC member forums and invited members to share additional ideas for new articles. I’m easily able to come up with new ideas on my own, but I figured that more abundance of ideas is better. I figured that it would be easier to do batch blogging if I could select ideas from a pool of 20 or 30 rather than a pool of 8. This gives me more flexibility in picking topics to match my inspiration and energy levels. Most of the time it felt like the next article choose me rather than vice versa. After finishing one article, I’d look back at the ideas list, and I’d pick up a clear signal to write a certain piece next.

My initial goal was to write 5 posts in a day. I thought that was conservative and that I’d likely be able to do more. This is more than I’ve ever written in a day though, so in that sense the bar was high, but I also felt that it should be achievable.

This batch blogging day was an off-day for exercise, so I got an early start. I wonder if it would be have better if I did my usual 5-mile run to start the day though.

I made a large green smoothie, cleared out a few minor tasks first, and wrote the first article of 1022 words (Is It Unethical to Have Pets?) while sipping the smoothie. I published it immediately since that was the post for that day.

Next I wrote a second article of 1219 words (Pre-Consent in Relationships) and queued it for publishing the next day.

I took a break to have more food (some grain-free cereal with fresh strawberries), and then I wrote a longer piece on entrepreneurship called Your Giant Pumpkin (2163 words).

I finished that one around 12:30pm and queued it for publishing.

I took a longer break for lunch with Rachelle and went back to writing around 2:30pm.

Next I wrote Fragile Habits (1055 words), took a short break, and wrote Your #1 Priority May Lead You Astray (1101 words).

By this time I was getting a bit bleary-eyed, so I took another break and chatted with Rachelle for a bit. I was pretty happy with 5 posts done since that was my goal.

I felt it would be nice to wrap up the day with an infrared sauna session, so I switched it on to heat it up. It takes about 45 minutes to heat up to 145º F. I figured that I could write at least one more post, maybe two short ones, while the sauna was heating, so I challenged myself to write some more.

I wrote Ass-Kicking Frames during that time. It’s only 608 words, but it took extra time to brainstorm and look up relevant movie quotes for it. I didn’t mind the extra time it took since I really enjoyed writing that piece – it was my favorite one of the day, probably because it was the most playful.

I finished around 6pm with six posts written, edited, and queued for publishing – 7168 words of new material.

That Tuesday writing marathon created enough articles to cover daily blogging through the following Sunday, with all of the posts queued to be automatically published in the morning of each day.

That meant I wouldn’t have to blog again till the following Monday (which is actually today, the day that this post is published).

I found the challenge lively, stimulating, and fun. It gave me a nice sense of accomplishment too. I’ve never written that many posts in a day before, so now I can say that my new record is writing six posts in one day.

The sauna session afterwards was really nice as well – a relaxing way to transition out of the blogging marathon.

At the end of the day, my brain was mush though. I could barely speak intelligibly when talking with Rachelle while we made dinner together that night. I tripped on my words a few times, as if trying to say tongue twisters. It felt like my language circuits were pretty fried.

Quite often when doing a long work session, I don’t feel the fatigue while I’m working, but I really feel it when I stop or take breaks. I felt the fatigue most strongly after writing. While writing I felt great.

I think that with more practice (or shorter articles), I could do more posts in a day. All but one of these were over 1000 words, and one was over 2000 words. I could mix in some shorter posts around 500 words.

I imagine that blogging daily for 7+ months made this easier since it keeps me warmed up for writing, but I also think I could have done this in prior years. What really helped was to make the commitment to give it a real test. I also think that generating article ideas the day before made it significantly easier. In the past I casually pondered batch blogging but never really committed myself to testing it seriously. This time I cleared my plate for the day and committed myself to write as much as I could before dinner time.

I could have written more if I did more writing after dinner, but my intention wasn’t to completely exhaust myself. I wanted to containerize it within a workday that ended before dinner. I wrote everything within a span of 12 hours but with ample breaks; that was sufficient for a decent personal proof of concept test.

I also did some other tasks along the way, including interacting in the CGC forums, handling some emails, and resolving a minor tech issue on the website, so technically the day wasn’t fully cleared, but I had enough space to make writing my primary focus for the day.

I think with some practice I could get up to doing 8-10 posts in one day. But I’d love to see if I can sustainably write 7 posts in one day since that would cover a week. Then I could dedicate one day a week to blogging and batch write all my posts. That would give me 6 days off from blogging every week. I’m curious how that change in workflow would turn out.

I also wonder if I continue to practice this way, will my writing circuits build more endurance, so I don’t feel as fatigued afterwards?

I actually wrote this post the day after that batch blogging day, in the morning on Wednesday, August 5th. I wanted to write one more post to cover Monday the 10th, so if I do another batch blogging day, I can do it on Tuesday the 11th. That’s because Monday wouldn’t be suitable since we have a CGC coaching call that day. I want my batch blogging days to be free of appointments, so I can stick with writing and not have to switch modes.

I do feel that my writing circuits are a bit off this morning. I feel very warmed up from yesterday’s marathon of writing, so in one sense the words are flowing easily. But I can also tell that some parts of my brain feel foggy and overworked and could use more rest and recovery. I feel like my eyes could use a break from staring at the screen too. I don’t feel fatigued per se. It just seems like some parts of my brain are still offline, as if I can’t get my mind to think properly in certain directions. I imagine that many people who’ve done very mono-focused work sessions can relate to this sensation.

Anyway… I consider this experiment an interesting success, so I’m going to lean into it further and see how well it goes.

You can be the judge, but I don’t feel that batch blogging negatively affected my writing. Writing this way is extra stimulating, fun, and challenging, so I feel this approach may inject some extra positives.

Writing one post a day feels a bit underwhelming by comparison – way too easy. I can be a bit of a stimulation junkie when it comes to creative work, so I like the freshness of this approach. I like that this could be an interesting way to push myself again, especially in terms of writing endurance.

I see batch blogging as an interesting tool to add to my creative toolbox. I can use it when I want, and I can also write individual posts outside of batch blogging sessions when I feel inspired to do so.

My daily blogging commitment is just for 2020, not something I intend to continue in future years. But I like the potential for batch blogging in future years since I may be able to write a month’s worth of articles in a day… or perhaps a calendar quarter’s worth of articles in a few days. That could create some interesting workflow rhythms since it would free up more space for creative projects in the space between. I could potentially go a few months at a stretch without attending to blogging while still providing the value that people like.

I supposed you could say that this article (2010 words) was part of the same batch blogging session, just carried into the next day. In that case the session amounts to 7 articles (9178 words).

Share Button

Coronavirus: Little evidence of Covid transmission in schools, says Williamson

The education secretary says a new coronavirus study supports the government decision to reopen schools.

Share Button

Nursing apprenticeship funding gets £172m boost

Ministers want nursing jobs in England to be more accessible, but a union says the plan falls short.

Share Button

Coronavirus: Is the world winning the pandemic fight?

Covid-19 has changed the world – are we winning or is the virus still taking hold, and when will it end?

Share Button

Coronavirus in Scotland: Care home residents to be allowed more visitors

Residents will be allowed up to three outdoor visitors at a time from Monday, ministers announce.

Share Button

Coronavirus: Moral duty to get all children back in school – Boris Johnson

Boris Johnson wants schools in England to be the last sector to close in any future local lockdowns.

Share Button

Ass-Kicking Frames

Here’s a really simple idea that can be useful for self-motivation.

Sometimes our frames are too flabby, giving us lots of leeway to drop the ball and slack off. In such cases it may be useful to adopt harsher frames, at least temporarily, to demand more from ourselves.

Here are some of these ass-kicking frames to consider:

  • Worrying = dumb
  • Quitting = dishonorable
  • Sleeping past 5am = loser
  • Not asking for the date = spineless
  • Clinging to a partial match = creepy
  • Tolerating Trump supporters = suffering fools

I think such frames are best when linked closely to actions and behaviors, not to more complex results like income. They can be helpful when facing quick do or don’t decisions, like: Get up now, or sleep in late.

Imagine your alarm going off in the morning, and you’re tempted to sleep in. Then an inner voice kicks in and exclaims: Sleeping in is for losers! Get your ass up now!

Or suppose you catch yourself worrying about something you can’t control, and you remind yourself: Worrying is a stupid waste of energy!

While I’m not suggesting that you beat yourself up here, I do think there’s room for using such frames judiciously without risking damage to your self esteem.

Challenging yourself in this way can actually be fun and motivating. I know it’s not for everyone, but for some people it helps. It’s a tool – use it if you like it. Try it if you think it has promise.

You can even connect this practice with memorable movie lines if you like, such as these:

  • On your feet, soldier! – The Terminator
  • Get your ass to Mars! – Total Recall
  • I have come here to chew bubblegum and kick ass. And I’m all out of bubblegum. – They Live
  • Pain don’t hurt. – Roadhouse
  • I feel the need, the need for speed. – Top Gun
  • I know kung fu. – The Matrix
  • You can’t handle the truth! – A Few Good Men
  • Freedom! – Braveheart
  • I pity the fool. – Rocky III
  • Wake up, time to die. – Blade Runner
  • Game over, man! – Aliens
  • I have had it with these motherfucking snakes on this motherfucking plane! – I hope you can guess this one. 😉

Even if the words of a line don’t quite fit your situation, that isn’t important. The emotion of the frame is what matters. “Get your ass to Mars!” may not fit your context, but if you remember the movie, you may remember the urgency of the line, right before bullets start flying. The emotion of this frame may be more effective than a more rational frame but emotionally flabby frame that makes it easy to slack off or quit on yourself.

There are so many good framing lines just in the movie The Princess Bride:

  • Inconceivable!
  • Death first!
  • I can cope with torture.
  • As you wish.
  • We are men of action. Lies do not become us.
  • Humiliations galore!
  • Have fun storming the castle!
  • It would take a miracle.
  • Life is pain.
  • Get used to disappointment.
  • To the pain!
  • Morons.

If you remember how the characters said these lines, you can summon some fun and engaging emotions that help you get into action. I especially love the “I can cope with torture” framing for facing unpleasant tasks. And I recently use the “Death first” line as a response when someone asked what it would take for me to eat something non-vegan. I wish I could use the “I am not left-handed” line from that movie too, but I actually am left-handed.

Are you kicking your own ass enough? If not, then stop using emotionally flabby frames, and get your ass to Mars!

Share Button

Health24.com | Yet another study finds vaccines to be safe

  • According to a new review, vaccines are an extremely safe way to protect human health
  • This is thanks to strict, continuous safety monitoring
  • However, many people still won’t get a coronavirus vaccine, even if it proves safe and effective  

Vaccines remain a “remarkably safe” way to protect human health, thanks to a rigorous system of safety monitoring that continues after approval, a new review shows.

Ongoing safety monitoring led to safety-related label changes in 25 out of 57 vaccines approved by the US Food and Drug Administration over a two-decade period, mostly related to the vaccine’s effect on specific groups of vulnerable people, an Israeli research team found.

“This report is the most comprehensive study of post-marketing vaccine safety published, and it shows that vaccines are remarkably safe, and that the current vaccine approval and post-marketing surveillance processes are robust and effective,” said senior researcher Dr Daniel Shepshelovich, of Tel Aviv University’s Sackler School of Medicine.

Adverse event reporting system

Vaccine hesitancy among Americans has been highlighted as a potential problem in the nation’s response to the Covid-19 pandemic, with some experts concerned that too many people simply won’t get a coronavirus vaccine even if one proves safe and effective.

“The current Covid-19 outbreak makes us further appreciate the importance of safe and effective vaccines against infectious diseases,” said Dr Daniel Mackey, a paediatrician with CHOC Children’s in Orange, California.

“As the world races to create a vaccine against Covid-19, we will now, more than any other time in recent history, be dependent on a robust vaccine adverse event reporting system to ensure that the chosen vaccines are safe for the greater population,” he said.

For the study, Shepshelovich and his colleagues tracked the progress of 57 vaccines that were FDA-approved between January 1996 and December 2015.

Researchers found that 25 of the vaccines had a total of 58 safety-related label changes that occurred following the approval.

Intestinal obstruction

More than a third of the label changes involved specific groups of people that were found to be potentially at a higher risk of health problems related to specific vaccines – for example, immune-compromised patients, pregnant women or preterm infants, Shepshelovich said.

Another 22% of label changes involved allergic reactions to vaccines, researchers reported. Most of these allergies related to latex used in the packaging.

Only one vaccine was withdrawn from the market, a rotavirus vaccine that increased the risk of an intestinal obstruction, researchers found.

“A timely alarm was sounded, and the vaccine was quickly removed from use,” Mackey said.

Robust studies

Overall, the safety monitoring data “represents an excellent track record, probably reflecting the professionalism and diligence of the personnel involved in the development, approval and regulation of vaccines,” Shepshelovich concluded.

Flu vaccines were found to have the fewest post-approval safety issues, with only three of 21 influenza vaccines requiring a label change, compared with 22 of 36 other vaccines.

“It’s important for people who have vaccine hesitancy to see that there are robust studies out there that support the use of vaccines,” said Dr Amesh Adalja, a senior scholar with the Johns Hopkins Center for Health Security in Baltimore.

“These are rigorously tested, and even after something is approved we’re continuing to track the safety of that vaccine,” he noted. “It really should give people who worry about vaccine safety a lot of confidence about how robust the process is for assessing the safety of these vaccines.”

The new study was published in the Annals of Internal Medicine.

Image credit: iStock

Share Button