Geologists solve puzzle that could predict valuable rare earth element deposits

Pioneering new research has helped geologists solve a long-standing puzzle that could help pinpoint new, untapped concentrations of some the most valuable rare earth deposits.

A team of geologists, led by Professor Frances Wall from the Camborne School of Mines, have discovered a new hypothesis to predict where rare earth elements neodymium and dysprosium could be found.

The elements are among the most sought after, because they are an essential part of digital and clean energy manufacturing, including magnets in large wind turbines and electric cars motors.

For the new research, scientists conducted a series of experiments that showed sodium and potassium — rather than chlorine or fluorine as previously thought — were the key ingredients for making these rare earth elements soluble.

This is crucial as it determines whether they crystalise — making them fit for extraction — or stayed dissolved in fluids.

The experiments could therefore allow geologists to make better predictions about where the best concentrations of neodymium and dysprosium are likely to be found.

The results are published in the journal, Science Advances on Friday, October 9th 2020.

University of Exeter researchers, through the ‘SoS RARE’ project, have previously studied many natural examples of the roots of very unusual extinct carbonatite volcanoes, where the world’s best rare earth deposits occur, in order to try and identify potential deposits of the rare earth minerals.

However, in order to gain a greater insight into their results, they invited Michael Anenburg to join the team to carry out experiments at the Australian National University (ANU).

He simulated the crystallisation of molten carbonate magma to find out which elements would be concentrated in the hot waters left over from the crystallisation process.

It showed that sodium and potassium make the rare earths soluble in solution. Without sodium and potassium, rare earth minerals precipitate in the carbonatite itself. With sodium, intermediate minerals like burbankite form and are then replaced. With potassium, dysprosium is more soluble than neodymium and carried out to the surrounding rocks.

Professor Frances Wall, leader of the SoS RARE project said: “This is an elegant solution that helps us understand better where ‘heavy’ rare earths like dysprosium and ‘light’ rare earths like neodymium’ may be concentrated in and around carbonatite intrusions. We were always looking for evidence of chloride-bearing solutions but failing to find it. These results give us new ideas.”

Michael Anenburg , a Postdoctoral Fellow at ANU said: “My tiny experimental capsules revealed minerals that nature typically hides from us. It was a surprise how well they explain what we see in natural rocks and ore deposits.”

Story Source:

Materials provided by University of Exeter. Note: Content may be edited for style and length.

Share Button

Scientists find upper limit for the speed of sound

A research collaboration between Queen Mary University of London, the University of Cambridge and the Institute for High Pressure Physics in Troitsk has discovered the fastest possible speed of sound.

The result- about 36 km per second — is around twice as fast as the speed of sound in diamond, the hardest known material in the world.

Waves, such as sound or light waves, are disturbances that move energy from one place to another. Sound waves can travel through different mediums, such as air or water, and move at different speeds depending on what they’re travelling through. For example, they move through solids much faster than they would through liquids or gases, which is why you’re able to hear an approaching train much faster if you listen to the sound propagating in the rail track rather than through the air.

Einstein’s theory of special relativity sets the absolute speed limit at which a wave can travel which is the speed of light, and is equal to about 300,000 km per second. However until now it was not known whether sound waves also have an upper speed limit when travelling through solids or liquids.

The study, published in the journal Science Advances, shows that predicting the upper limit of the speed of sound is dependent on two dimensionless fundamental constants: the fine structure constant and the proton-to-electron mass ratio.

These two numbers are already known to play an important role in understanding our Universe. Their finely-tuned values govern nuclear reactions such as proton decay and nuclear synthesis in stars and the balance between the two numbers provides a narrow ‘habitable zone’ where stars and planets can form and life-supporting molecular structures can emerge. However, the new findings suggest that these two fundamental constants can also influence other scientific fields, such as materials science and condensed matter physics, by setting limits to specific material properties such as the speed of sound.

The scientists tested their theoretical prediction on a wide range of materials and addressed one specific prediction of their theory that the speed of sound should decrease with the mass of the atom. This prediction implies that the sound is the fastest in solid atomic hydrogen. However, hydrogen is an atomic solid at very high pressure above 1 million atmospheres only, pressure comparable to those in the core of gas giants like Jupiter. At those pressures, hydrogen becomes a fascinating metallic solid conducting electricity just like copper and is predicted to be a room temperature superconductor. Therefore, researchers performed state-of-the-art quantum mechanical calculations to test this prediction and found that the speed of sound in solid atomic hydrogen is close to the theoretical fundamental limit.

Professor Chris Pickard, Professor of Materials Science at the University of Cambridge, said: “Soundwaves in solids are already hugely important across many scientific fields. For example, seismologists use sound waves initiated by earthquakes deep in the Earth interior to understand the nature of seismic events and the properties of Earth composition. They’re also of interest to materials scientists because sound waves are related to important elastic properties including the ability to resist stress.”

Story Source:

Materials provided by Queen Mary University of London. Note: Content may be edited for style and length.

Share Button

Female surgeons perform less complex cases than male peers, likely due to systemic bias

Female surgeons at a large academic medical center perform less complex surgical procedures than their male counterparts, according to a new study by researchers at Massachusetts General Hospital (MGH). This study, published in Annals of Surgery, is one of the first to measure the problem of underemployment among female surgeons in the United States, which can affect compensation, career advancement and job satisfaction.

Only about one in five surgeons practicing in U.S. is female. Unemployment is virtually nonexistent among surgeons, but many female surgeons, as well as professional women in other fields, experience underemployment — the underuse of skills — according to the Federal Reserve Bank. “Women in surgery talk among themselves about how they may be perceived as less confident or competent, and for those reasons they may have less opportunity to do exciting and challenging cases,” says Cassandra Kelleher, MD, a pediatric surgeon at MGH and senior author of the Annals of Surgery study. “We wondered if this was true, and if so, why?”

To find out, Kelleher, post-doctoral researcher Ya-Wen Chen, MD, MPH, the lead author of the study, and several colleagues analyzed 551,047 case records from operations performed by 131 surgeons at MGH between 1997 and 2018. To compare the difficulty of surgeries that females and males performed, the researchers used a universally accepted metric known as the work Relative Value Unit (wRVU), which measures the technical complexity of a procedure.

The study found that the mean wRVU for cases performed by male surgeons was 10.8, compared to 8.3 for female surgeons, a difference in complexity of 23 percent. “If you multiply that over the course of a year or a career, that’s a huge difference,” says Chen.

The study’s design ruled out common explanations for why female surgeons perform less complex procedures, such as their choice of subspecialty, or that women are less available due to family commitments. The study also found no sign that the problem has improved over the last two decades and indicated that underemployment was a more significant problem for female surgeons with greater seniority.

For years, female surgeons have been advised to take steps such as attending leadership training conferences to help advance their careers. While these programs have value, the study authors stress that female surgeons themselves are not the problem. “It may be that referring physicians or patients lack confidence in female surgeons to perform complex cases,” says Chen. “If that’s true, then we are not going to solve the problem solely by having female surgeons attend leadership training. We need a systemic approach.”

Finding the right approach will require deeper understanding of the problem, researchers say, so Chen, Kelleher and their colleagues are currently studying new patient referrals received by a group of female and male surgeons.

Story Source:

Materials provided by Massachusetts General Hospital. Note: Content may be edited for style and length.

Share Button

What tiny surfing robots teach us about surface tension

Spend an afternoon by a creek in the woods, and you’re likely to notice water striders — long-legged insects that dimple the surface of the water as they skate across. Or, dip one side of a toothpick in dish detergent before placing it in a bowl of water, and impress your grade schooler as the toothpick gently starts to move itself across the surface.

Both situations illustrate the concepts of surface tension and propulsion velocity. At Michigan Technological University, mechanical engineer Hassan Masoud and PhD student Saeed Jafari Kang have applied the lessons of the water strider and the soapy toothpick to develop an understanding of chemical manipulation of surface tension.

Their vehicle? Tiny surfing robots.

“During the past few decades, there have been many efforts to fabricate miniature robots, especially swimming robots,” said Masoud, an assistant professor in the mechanical engineering-engineering mechanics department. “Much less work has been done on tiny robots capable of surfing at the interface of water and air, what we call liquid interfaces, where very few robots are capable of propelling themselves.”

Beyond the obvious implications for future Lucasfilm droids designed for ocean planets (C-H2O), what are the practical applications of surfing robots?

“Understanding these mechanisms could help us understand colonization of bacteria in a body,” Masoud said. “The surfing robots could be used in biomedical applications for surgery. We are unraveling the potential of these systems.”

Hunting for Answers and the Marangoni Effect

During his doctoral studies and postdoc appointment, Masoud conducted research to understand the hydrodynamics of synthetic microrobots and the mechanisms by which they move through fluid. While helping a colleague with an experiment, Masoud made an observation he couldn’t explain. An aha! moment came shortly thereafter.

“During a conversation with a physicist, it occurred to me that what we had observed then was due to the release of a chemical species that changed the surface tension and resulted in motion of particles that we observed,” Masoud said.

That knowledge has led Masoud to continue analyzing the propulsion behavior of diminutive robots — only several microns in size — and the Marangoni effect, which is the transfer of mass and momentum due to a gradient of surface tension at the interface between two fluids. In addition to serving as an explanation for tears of wine, the Marangoni effect helps circuit manufacturers dry silicon wafers and can be applied to grow nanotubes in ordered arrays.

For Masoud’s purposes, the effect helps him design surfing robots powered by manipulating surface tension chemically. This solves a core problem for our imagined C-H2O: How would a droid propel itself across the surface of water without an engine and propeller?

Detailed in research findings published recently in the journal Physical Review Fluids, Masoud, Jafari Kang and their collaborators used experimental measurements and numerical simulations to demonstrate that the microrobot surfers propel themselves in the direction of lower surface tension — in reverse of the expected direction.

“We discovered that negative pressure is the primary contributor to the fluid force experienced by the surfer and that this suction force is mainly responsible for the reverse Marangoni propulsion,” Masoud said. “Our findings pave the way for designing miniature surfing robots. In particular, knowing that the direction of propulsion is altered by a change in the surrounding boundary can be harnessed for designing smart surfers capable of sensing their environment.”

Stability Studies on the Horizon

While Masoud’s work focused on understanding how microrobots can chemically manipulate their environment to create propulsion, future studies will zero in on the stability of these tiny surfers. Under what conditions are they stable? How do multiple surfers interact with each other? The interactions could provide insight into the swarm dynamics commonly seen in bacteria.

“We have just scratched the surface of learning the mechanisms through which the surfers — and other manipulators of surface tension — move,” Masoud said. “Now we are building understanding toward how to control their movement.”

Story Source:

Materials provided by Michigan Technological University. Original written by Kelley Christensen. Note: Content may be edited for style and length.

Share Button

Covid: South Asian hospital patients ‘at greater risk of dying’

Biology is a more important factor than poverty or underlying health, research suggests.

Share Button

Covid cases increase rapidly as next steps planned

There has been a marked increase in cases over recent weeks in England, especially in the north.

Share Button

Coronavirus: Rapid bedside test shows promise in hospitals

The rapid test could help combat the spread of the virus in hospitals, researchers say.

Share Button

Love to golf? Shape up your swing

Mayo Clinic does not endorse companies or products. Advertising revenue supports our not-for-profit mission.

Advertising & Sponsorship

Mayo Clinic Marketplace

Check out these best-sellers and special offers on books and newsletters from Mayo Clinic.

Share Button

Covid-19: New restrictions to be announced for parts of England ‘within days’ – Jenrick

Minister Robert Jenrick did not rule out closing pubs and restaurants in the worst-affected areas.

Share Button

Relearning to Breathe

As I noted in yesterday’s post about learning to breathe differently, I’m leaning into a different way of thinking about breathing and working on changing old habits to see how The Oxygen Advantage approach affects me.

This morning I went for my second nose-breathing run with a similar format like I tried yesterday. I started with a 15-minute walk (all nose breathing), and then I was able to run for 3 minutes with nose breathing before dropping back to walking for a few minutes. That’s longer than the 1:44 I did yesterday for the first round.

For the second round, I ran for 5 minutes before dropping back to walking.

And then for the third round, I ran 42:30 continuously. During this segment I also incorporated 10 breath holds with about 12 paces each time. For the last mile, I pushed myself to run a little faster. My pacing was still slower than I could do with mouth breathing, but I’m getting used to running while nose breathing.

After running for 30 minutes straight with nose breathing during the final segment of yesterday’s run, I thought that maybe I could do that right away upon starting today… like maybe my body just needed to learn the right breathing rhythm. Apparently there’s more to this though since it was still challenging starting out today, so that’s why I only made it 3 minutes the first round. It was better than yesterday at least.

Doing a 3-minute round followed by a 5-minute round worked well for starting. Nose breathing does seem easier and more natural when I’m very warmed up, but apparently even a 15-minute walk isn’t enough to warm me up fully for it.

Perhaps I’ll experiment with faster walking for the warmup to see if that makes a difference. It would be nice to run for an hour without needing to do a couple of intervals first. Maybe I just need more practice to retrain my body to get used to exercising with nose breathing.

I also wonder what would happen if I skipped or shortened the walking warmup (even though it’s recommended by the book) and just started with some short running/walking intervals to warm up to continuous running. Previously I would only walk about 2 minutes before I started running.

Walking Breath Holds

I’m also practicing walking breath holds as The Oxygen Advantage recommends. So while walking, I hold my breath from time to time and count how many paces I can go before feeling a strong urge to breathe again. These walking breath holds are done after an exhale, so the lungs are mostly empty.

After the hold I return to normal nose breathing. Usually the next breath or two is heavier, but my breathing calms and stabilizes within 2-3 breaths, which is how it’s expected to go. The purpose is to train the body to tolerate more CO2 in the blood.

Currently I’m averaging around 16 paces per walking hold. According to the book, the goal is to build up to 80 paces, and a good rate of improvement is to add 10 paces per week. So that means adding 1-2 extra paces per day, which seems doable. If I can do 16 steps per hold today, I can probably do 17-18 steps tomorrow.

It seems almost unfathomable to build the duration of these holds from 16 to 80 paces over several weeks of practice – a 5x increase. It would be an interesting result to walk 80 steps without breathing (maybe even by the end of the year) since that’s far from what I can do now. I’ll keep practicing and see if I can get there. Even doubling to 32 steps per hold would feel like an accomplishment.

Early Symptoms

Switching to full-time nose breathing (instead of part-time) while also making my breathing slower and shallower is definitely different. My nose feels clearer inside but also more sensitive, like there’s a mild stinging sensation. It’s similar to the feeling after eating a big dollop of wasabi paste – that hot mustard burning sensation that really opens up the sinuses.

I’ve felt sneezy now and then too. Sometimes it feels like there’s a sneeze stuck in my nose that won’t come out. This is only mildly uncomfortable though.

While my nose feels clearer and more sensitive inside, my throat has been a little more congested. One breathing pathway is getting used more, and the other is getting used less. So I imagine they’re both figuring out how to adjust to this change. The book mentioned that there may be some symptoms while fully adapting to nose breathing.

What I like about The Oxygen Advantage practices is that they’re easy to incorporate into my day. I can do them while sitting at my desk, walking, and running as I’d normally do. So other than reading the book, there isn’t a serious time investment to make. I’m always breathing, so now I just practice breathing differently and weave in a few simple exercises. I also like that the metrics are easy to measure.

Share Button